[PATCH 05/10] i.MX23/28: Fix setting of lcd clock

Sascha Hauer s.hauer at pengutronix.de
Thu Jan 20 09:57:41 EST 2011


On Thu, Jan 20, 2011 at 03:01:47PM +0100, Gregory CLEMENT wrote:
> On 01/20/2011 10:46 AM, Sascha Hauer wrote:
> > Use the correct bitmask for masking out which is
> > SET_PIXFRAC(MASK_PIXFRAC)
> > 
> 
> I was just about to send you the same kind of patch, as this bug bit me during
> kernel boot when using cpufreq.
> 
> As you are working on imx23 and video driver, what do you think of my previous
> patches ? I sent them in January the 4th:
> 
> ARM STM/i.MX: Add possibility to choose the bit per pixel for STM
>     video driver

This looks ok.

> ARM STM/i.MX: Add possibility to select the data mode for stm video
>       driver ( DCn signal is high )

Looks ok. What is this pin good for? Is this bit used in conjunction
with other bits which happen to have the right value for you?

> ARM STM/i.MX: Add the reset control of LCD

We use the same pin as gpio and toggle it in the platform specific hook,
so I could rebase my chumby patch on this one.

For the last two patches I prefer having flags in the platform data
rather than having a u32 for a single flag.

Sascha

> 
> They should need to be rebased on this new patch set as you made some changes
> with the name of the structures and the name of the files. But before doing
> this I would like to know if there was a chance that they will be applied in
> barebox.
> 
> 
> > Signed-off-by: Sascha Hauer <s.hauer at pengutronix.de>
> > ---
> >  arch/arm/mach-stm/imx_lcd_clk.c |    3 ++-
> >  1 files changed, 2 insertions(+), 1 deletions(-)
> > 
> > diff --git a/arch/arm/mach-stm/imx_lcd_clk.c b/arch/arm/mach-stm/imx_lcd_clk.c
> > index 8938664..65bfc6e 100644
> > --- a/arch/arm/mach-stm/imx_lcd_clk.c
> > +++ b/arch/arm/mach-stm/imx_lcd_clk.c
> > @@ -120,7 +120,8 @@ unsigned imx_set_lcdifclk(unsigned nc)
> >  			best_frac, best_div, 480 * 18 / best_frac,
> >  			480000 * 18 / best_frac / best_div);
> >  
> > -	reg = readl(IMX_CCM_BASE + HW_CLKCTRL_FRAC) & ~MASK_PIXFRAC;
> > +	reg = readl(IMX_CCM_BASE + HW_CLKCTRL_FRAC);
> > +	reg &= ~SET_PIXFRAC(MASK_PIXFRAC);
> >  	reg |= SET_PIXFRAC(best_frac);
> >  	writel(reg, IMX_CCM_BASE + HW_CLKCTRL_FRAC);
> >  	writel(reg & ~CLKCTRL_FRAC_CLKGATEPIX, IMX_CCM_BASE + HW_CLKCTRL_FRAC);
> 
> 
> -- 
> Gregory Clement, Free Electrons
> Kernel, drivers, real-time and embedded Linux
> development, consulting, training and support.
> http://free-electrons.com
> +33 602 196 044
> 

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |



More information about the barebox mailing list