[RFC] add Tegra support to barebox

[Jean-Christophe PLAGNIOL-VILLARD]

On 00:24 Thu 11 Aug     , Antony Pavlov wrote:
> Hi!
> 
> I have a Toshiba AC100 smartbook. It is based on Nvidia Tegra 250 T20 chip.
> I want to port barebox to it.
> 
> I have successfully built and run u-boot for AC100 from
> https://github.com/chpec/uboot-ac100.git. This u-boot version has lcd,
> serial port and USB support.
> There is another tegra support u-boot branch:
> https://github.com/muromec/uboot-tegra.git
> Also linux has satisfactory tegra support.
> 
> I want to discuss source file organization for Tegra and AC100 support
> in the barebox.
> AFAIK tegra is not resemble to current arm machines, supported by barebox.
> 
> For example, this is the comment from barebox tegra source code:
> 
> /*
>  * Tegra2 uses 2 separate CPUs - the AVP (ARM7TDMI) and the CPU (dual A9s).
>  * U-Boot runs on the AVP first, setting things up for the CPU (PLLs,
>  * muxes, clocks, clamps, etc.). Then the AVP halts, and expects the CPU
>  * to pick up its reset vector, which points here.
>  */
> 
> I propose such file structure:
> 
>   arch/arm/
>   arch/arm/boards/toshiba_ac100
>   arch/arm/mach-tegra
> 
> Has anybody any objections or comments?
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj at jcrosoft.com>

Best Regards,
J.