[PATCH 7/7] pcm038: led testing. Not to be committed

[Sascha Hauer]

Signed-off-by: Sascha Hauer <s.hauer at pengutronix.de>
---
 arch/arm/boards/pcm038/pcm038.c |   24 +++++++++++++++++++++++-
 1 files changed, 23 insertions(+), 1 deletions(-)

diff --git a/arch/arm/boards/pcm038/pcm038.c b/arch/arm/boards/pcm038/pcm038.c
index 1dbc6b6..cfca7d3 100644
--- a/arch/arm/boards/pcm038/pcm038.c
+++ b/arch/arm/boards/pcm038/pcm038.c
@@ -44,6 +44,7 @@
 #include <mach/spi.h>
 #include <mach/iomux-mx27.h>
 #include <mach/devices-imx27.h>
+#include <led.h>
 
 #include "pll.h"
 
@@ -192,11 +193,26 @@ static void pcm038_mmu_init(void)
 }
 #endif
 
+struct gpio_led led1 = {
+	.gpio = 10,
+};
+
+struct gpio_led led2 = {
+	.gpio = 11,
+	.active_low = 1,
+};
+
+struct gpio_rgb_led led3 = {
+	.gpio_r = 12,
+	.gpio_g = 13,
+	.gpio_b = 14,
+	.active_low = 1,
+};
+
 static int pcm038_devices_init(void)
 {
 	int i;
 	char *envdev;
-
 	unsigned int mode[] = {
 		PD0_AIN_FEC_TXD0,
 		PD1_AIN_FEC_TXD1,
@@ -270,6 +286,12 @@ static int pcm038_devices_init(void)
 
 	pcm038_mmu_init();
 
+	led_gpio_register(&led1);
+	led_gpio_register(&led2);
+	led_gpio_rgb_register(&led3);
+	led_set_trigger(led_trigger_net_tx, &led1.led);
+	led_set_trigger(led_trigger_net_rx, &led2.led);
+
 	/* configure 16 bit nor flash on cs0 */
 	CS0U = 0x0000CC03;
 	CS0L = 0xa0330D01;
-- 
1.7.2.3