[PATCH 6/8] wifi: ath12k: add multi-link flag in peer create command

[Kalle Valo]

From: Sriram R <quic_srirrama at quicinc.com>

Driver should indicate to firmware whether a peer is multi-link or not in peer
create command using multi-link flag. Add changes to support
WMI_TAG_MLO_PEER_CREATE_PARAMS in WMI_PEER_CREATE_CMDID.

Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3

Signed-off-by: Sriram R <quic_srirrama at quicinc.com>
Signed-off-by: Harshitha Prem <quic_hprem at quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo at quicinc.com>
---
 drivers/net/wireless/ath/ath12k/mac.c |  5 +++--
 drivers/net/wireless/ath/ath12k/wmi.c | 27 +++++++++++++++++++++++----
 drivers/net/wireless/ath/ath12k/wmi.h |  6 ++++++
 3 files changed, 32 insertions(+), 6 deletions(-)

diff --git a/drivers/net/wireless/ath/ath12k/mac.c b/drivers/net/wireless/ath/ath12k/mac.c
index 019a1a6c6777..b628bc2fd0f5 100644
--- a/drivers/net/wireless/ath/ath12k/mac.c
+++ b/drivers/net/wireless/ath/ath12k/mac.c
@@ -4981,8 +4981,9 @@ static int ath12k_mac_station_add(struct ath12k *ar,
 	}
 
 	peer_param.vdev_id = arvif->vdev_id;
-	peer_param.peer_addr = sta->addr;
+	peer_param.peer_addr = arsta->addr;
 	peer_param.peer_type = WMI_PEER_TYPE_DEFAULT;
+	peer_param.ml_enabled = sta->mlo;
 
 	ret = ath12k_peer_create(ar, arvif, sta, &peer_param);
 	if (ret) {
@@ -7016,7 +7017,7 @@ int ath12k_mac_vdev_create(struct ath12k *ar, struct ath12k_link_vif *arvif)
 	struct ath12k_vif *ahvif = arvif->ahvif;
 	struct ieee80211_vif *vif = ath12k_ahvif_to_vif(ahvif);
 	struct ath12k_wmi_vdev_create_arg vdev_arg = {0};
-	struct ath12k_wmi_peer_create_arg peer_param;
+	struct ath12k_wmi_peer_create_arg peer_param = {0};
 	struct ieee80211_bss_conf *link_conf;
 	u32 param_id, param_value;
 	u16 nss;
diff --git a/drivers/net/wireless/ath/ath12k/wmi.c b/drivers/net/wireless/ath/ath12k/wmi.c
index e089b58bbea1..0583d832fac7 100644
--- a/drivers/net/wireless/ath/ath12k/wmi.c
+++ b/drivers/net/wireless/ath/ath12k/wmi.c
@@ -1230,9 +1230,14 @@ int ath12k_wmi_send_peer_create_cmd(struct ath12k *ar,
 	struct ath12k_wmi_pdev *wmi = ar->wmi;
 	struct wmi_peer_create_cmd *cmd;
 	struct sk_buff *skb;
-	int ret;
+	int ret, len;
+	struct wmi_peer_create_mlo_params *ml_param;
+	void *ptr;
+	struct wmi_tlv *tlv;
 
-	skb = ath12k_wmi_alloc_skb(wmi->wmi_ab, sizeof(*cmd));
+	len = sizeof(*cmd) + TLV_HDR_SIZE + sizeof(*ml_param);
+
+	skb = ath12k_wmi_alloc_skb(wmi->wmi_ab, len);
 	if (!skb)
 		return -ENOMEM;
 
@@ -1244,9 +1249,23 @@ int ath12k_wmi_send_peer_create_cmd(struct ath12k *ar,
 	cmd->peer_type = cpu_to_le32(arg->peer_type);
 	cmd->vdev_id = cpu_to_le32(arg->vdev_id);
 
+	ptr = skb->data + sizeof(*cmd);
+	tlv = ptr;
+	tlv->header = ath12k_wmi_tlv_hdr(WMI_TAG_ARRAY_STRUCT,
+					 sizeof(*ml_param));
+	ptr += TLV_HDR_SIZE;
+	ml_param = ptr;
+	ml_param->tlv_header =
+			ath12k_wmi_tlv_cmd_hdr(WMI_TAG_MLO_PEER_CREATE_PARAMS,
+					       sizeof(*ml_param));
+	if (arg->ml_enabled)
+		ml_param->flags = cpu_to_le32(ATH12K_WMI_FLAG_MLO_ENABLED);
+
+	ptr += sizeof(*ml_param);
+
 	ath12k_dbg(ar->ab, ATH12K_DBG_WMI,
-		   "WMI peer create vdev_id %d peer_addr %pM\n",
-		   arg->vdev_id, arg->peer_addr);
+		   "WMI peer create vdev_id %d peer_addr %pM ml_flags 0x%x\n",
+		   arg->vdev_id, arg->peer_addr, ml_param->flags);
 
 	ret = ath12k_wmi_cmd_send(wmi, skb, WMI_PEER_CREATE_CMDID);
 	if (ret) {
diff --git a/drivers/net/wireless/ath/ath12k/wmi.h b/drivers/net/wireless/ath/ath12k/wmi.h
index 33b9643644c6..07bd275608bf 100644
--- a/drivers/net/wireless/ath/ath12k/wmi.h
+++ b/drivers/net/wireless/ath/ath12k/wmi.h
@@ -3026,6 +3026,12 @@ struct ath12k_wmi_peer_create_arg {
 	const u8 *peer_addr;
 	u32 peer_type;
 	u32 vdev_id;
+	bool ml_enabled;
+};
+
+struct wmi_peer_create_mlo_params {
+	__le32 tlv_header;
+	__le32 flags;
 };
 
 struct ath12k_wmi_pdev_set_regdomain_arg {
-- 
2.39.5