[PATCH v6 5/8] wifi: ath12k: fix struct hal_rx_mpdu_start

[Kang Yang]

Current struct hal_rx_mpdu_start in hal_rx.h is not matched with
hardware descriptor definition. This hardware descriptor definition
is determined by hardware. Host shall follow it.

So update struct hal_rx_mpdu_start and related code.

Both QCN9274 and WCN7850 need this modification.

Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00210-QCAHKSWPL_SILICONZ-1

Signed-off-by: Kang Yang <quic_kangyang at quicinc.com>
---
 drivers/net/wireless/ath/ath12k/hal_rx.h | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

diff --git a/drivers/net/wireless/ath/ath12k/hal_rx.h b/drivers/net/wireless/ath/ath12k/hal_rx.h
index c69df852ae69..2de7b0eba9f2 100644
--- a/drivers/net/wireless/ath/ath12k/hal_rx.h
+++ b/drivers/net/wireless/ath/ath12k/hal_rx.h
@@ -452,15 +452,16 @@ struct hal_rx_phyrx_rssi_legacy_info {
 	__le32 rsvd1;
 } __packed;
 
-#define HAL_RX_MPDU_START_INFO0_PPDU_ID	GENMASK(31, 16)
-#define HAL_RX_MPDU_START_INFO1_PEERID	GENMASK(31, 16)
-#define HAL_RX_MPDU_START_INFO2_MPDU_LEN GENMASK(13, 0)
+#define HAL_RX_MPDU_START_INFO0_PPDU_ID			GENMASK(31, 16)
+#define HAL_RX_MPDU_START_INFO1_PEERID			GENMASK(31, 16)
+#define HAL_RX_MPDU_START_INFO2_MPDU_LEN		GENMASK(13, 0)
 struct hal_rx_mpdu_start {
+	__le32 rsvd0[9];
 	__le32 info0;
 	__le32 info1;
-	__le32 rsvd1[11];
+	__le32 rsvd1[2];
 	__le32 info2;
-	__le32 rsvd2[9];
+	__le32 rsvd2[16];
 } __packed;
 
 #define HAL_RX_PPDU_END_DURATION	GENMASK(23, 0)
-- 
2.34.1