wcn7850 issues
david Atkins
david at 3adesign.co.uk
Thu Aug 29 22:55:35 PDT 2024
Any updates on this? We still cannot register a Hamilton card with ath12k driver with a 4x4 AP
> -----Original Message-----
> From: ath12k <ath12k-bounces at lists.infradead.org> On Behalf Of david
> Atkins
> Sent: Monday, August 19, 2024 11:55 AM
> To: Baochen Qiang <quic_bqiang at quicinc.com>; ath12k at lists.infradead.org
> Subject: RE: wcn7850 issues
>
> > On 8/16/2024 8:23 PM, david Atkins wrote:
> > >> On 8/15/2024 4:38 AM, david Atkins wrote:
> > >>>>
> > >>>> On 8/6/2024 4:06 PM, david Atkins wrote:
> > >>>>> No support for EHT and therefore no MSC 12 or 13 which fits with
> > >>>>> the dmesg warning about it not being supported,
> > >>>> did not noted this ... So if AP does not support EHT, above
> > >>>> warnings makes sense, like you said.
> > >>>>
> > >>>
> > >>> Anseres inline, AP supports EHT
> > >>>
> > >>>> is this a card firmware
> > >>>>> issue rather than the driver?
> > >>>> did not follow you here, why is it an issue?
> > >>>>
> > >>>
> > >>> Is the firmware that’s uploaded to the card not supporting EHT?
> > >>>
> > >> FW does support EHT.
> > >>
> > >> You are checking scan results, so it is AP not advertising EHT
> > >> support (actually AP supports EHT, it is missing in scan results
> > >> because IW does not print it. I don't know your IW, but at least
> > >> upstream IW does not print it currently), not WCN7850.
> > >
> > >
> > > I have captured beacon packets from the AP, they show the presence
> > > of EHT,
> > this is a snip from the packet decoded, is there something here that
> > would prevent the Hamilton card seeing eht?
> > >
> > > Ext Tag: EHT Capabilities (802.11be D3.0)
> > > Ext Tag length: 14 (Tag len: 15)
> > > Ext Tag Number: EHT Capabilities (802.11be D3.0) (108)
> > > EHT MAC Capabilities Information: 0x0017, EPCS Priority
> > > Access
> > Support, EHT OM Control Support, Triggered TXOP Sharing Mode 1
> > Support, Restricted TWT Support, Maximum MPDU Length: 3 895, EHT Link
> > Adaptation
> > Support: No feedback
> > > .... .... .... ...1 = EPCS Priority Access Support: Supported
> > > .... .... .... ..1. = EHT OM Control Support: Supported
> > > .... .... .... .1.. = Triggered TXOP Sharing Mode 1 Support:
> Supported
> > > .... .... .... 0... = Triggered TXOP Sharing Mode 2
> > > Support: Not
> > supported
> > > .... .... ...1 .... = Restricted TWT Support: Supported
> > > .... .... ..0. .... = SCS Traffic Description Support: Not supported
> > > .... .... 00.. .... = Maximum MPDU Length: 3 895 (0x0)
> > > .... ...0 .... .... = Maximum A-MPDU Length Exponent Extension: 0
> > > .... ..0. .... .... = EHT TRS Support: Not supported
> > > .... .0.. .... .... = TXOP Return Support In TXOP
> > > Sharing Mode 2: Not
> > supported
> > > .... 0... .... .... = Two BQRs Support: Not supported
> > > ..00 .... .... .... = EHT Link Adaptation Support: No feedback (0)
> > > 00.. .... .... .... = Reserved: 0x0
> > > EHT PHY Capabilities Information
> > > EHT PHY Bits 0-15: 0xffe0
> > > .... .... .... ...0 = Reserved: 0x0
> > > .... .... .... ..0. = Support For 320 MHz in 6 GHz: Not supported
> > > .... .... .... .0.. = Support for 242-tone RU in
> > > BW Wider than 20
> > MHz: Not supported
> > > .... .... .... 0... = NDP With 4x EHT-LTF And
> > > 3.2 us GI: Not
> > supported
> > > .... .... ...0 .... = Partial Bandwidth UL MU-MIMO: Not
> supported
> > > .... .... ..1. .... = SU Beamformer: Supported
> > > .... .... .1.. .... = SU Beamformee: Supported
> > > .... ..11 1... .... = Beamformee SS (<= 80 MHz): 0x7
> > > ...1 11.. .... .... = Beamformee SS (= 160 MHz): 0x7
> > > 111. .... .... .... = Beamformee SS (= 320 MHz): 0x7
> > > EHT PHY Bits 16-31: 0x00db
> > > .... .... .... .011 = Number Of Sounding Dimensions (<= 80 MHz):
> > 0x3
> > > .... .... ..01 1... = Number Of Sounding Dimensions (= 160 MHz):
> > 0x3
> > > .... ...0 11.. .... = Number Of Sounding Dimensions (= 320 MHz):
> > 0x3
> > > .... ..0. .... .... = Ng = 16 SU Feedback: Not supported
> > > .... .0.. .... .... = Ng = 16 MU Feedback: Not supported
> > > .... 0... .... .... = Codebook Size = (4,2) SU
> > > Feedback: Not
> > supported
> > > ...0 .... .... .... = Codebook Size = (7,5) MU
> > > Feedback: Not
> > supported
> > > ..0. .... .... .... = Triggered SU Beamforming
> > > Feedback: Not
> > supported
> > > .0.. .... .... .... = Triggered MU Beamforming Partial BW
> Feedback:
> > Not supported
> > > 0... .... .... .... = Triggered CQI Feedback: Not supported
> > > EHT PHY Bits 32-39: 0x18
> > > .... ...0 = Partial Bandwidth DL MU-MIMO: Not supported
> > > .... ..0. = EHT PSR-Based SR support: Not supported
> > > .... .0.. = Power Boost Factor Support: Not supported
> > > .... 1... = EHT MU PPDU With 4x EHT-LTF and 0.8 us GI:
> > Supported
> > > 0001 .... = Max Nc: 1
> > > EHT PHY Bits 40-63: 0x3ed876
> > > .... .... .... .... .... ...0 = Non-Triggered
> > > CQI Feedback: Not
> > supported
> > > .... .... .... .... .... ..1. = Tx 1024-QAM &
> > > 4096-QAM < 242-tone RU
> > Support: Supported
> > > .... .... .... .... .... .1.. = Rx 1024-QAM &
> > > 4096-QAM < 242-tone-RU
> > Support: Supported
> > > .... .... .... .... .... 0... = PPE Thresholds Present: Not Present
> > > .... .... .... .... ..11 .... = Common Nominal Packet Padding: 3
> > > .... .... .... .000 01.. .... = Maximum Number
> > > Of Supported EHT-
> > LTFs: 1
> > > .... .... .101 1... .... .... = Support Of MCS 15: 11
> > > .... .... 1... .... .... .... = Support Of EHT DUP (MCS 14) in 6 GHz:
> > Supported
> > > .... ...0 .... .... .... .... = Support For 20
> > > MHz Operating STA
> > Receiving NDP With Wider BW: Not supported
> > > .... ..1. .... .... .... .... = Non-OFDMA UL
> > > MU-MIMO (BW <= 80
> > MHz): Supported
> > > .... .1.. .... .... .... .... = Non-OFDMA UL
> > > MU-MIMO (BW = 160
> > MHz): Supported
> > > .... 1... .... .... .... .... = Non-OFDMA UL
> > > MU-MIMO (BW = 320
> > MHz): Supported
> > > ...1 .... .... .... .... .... = MU Beamformer (BW <= 80 MHz):
> > Supported
> > > ..1. .... .... .... .... .... = MU Beamformer (BW = 160 MHz):
> > Supported
> > > .0.. .... .... .... .... .... = MU Beamformer
> > > (BW = 320 MHz): Not
> > supported
> > > 0... .... .... .... .... .... = TB Sounding
> > > Feedback Rate Limit: Not
> > supported
> > > EHT PHY Bits 64-71: 0x444400
> > > .... ...0 = Rx 1024-QAM In Wider Bandwidth DL OFDMA
> Support:
> > Not supported
> > > .... ..0. = Rx 4096-QAM In Wider Bandwidth DL OFDMA
> SUpport:
> > Not supported
> > > 0000 00.. = Reserved: 0x00
> > > Supported EHT-MCS and NSS Set
> > > EHT-MCS Map (BW <= 80MHz): 0x444444
> > > .... .... .... .... .... 0100 = Rx Max Nss That Supports EHT-MCS 0-
> 9:
> > 4
> > > .... .... .... .... 0100 .... = Tx Max Nss That Supports EHT-MCS 0-9:
> 4
> > > .... .... .... 0100 .... .... = Rx Max Nss That
> > > Supports EHT-MCS 10-
> > 11: 4
> > > .... .... 0100 .... .... .... = Tx Max Nss That
> > > Supports EHT-MCS 10-
> > 11: 4
> > > .... 0100 .... .... .... .... = Rx Max Nss That
> > > Supports EHT-MCS 12-
> > 13: 4
> > > 0100 .... .... .... .... .... = Tx Max Nss That
> > > Supports EHT-MCS 12-
> > 13: 4
> > > Ext Tag: EHT Operation (802.11be D3.0)
> > > Ext Tag length: 8 (Tag len: 9)
> > > Ext Tag Number: EHT Operation (802.11be D3.0) (106)
> > > EHT Operation Parameters: 0x01, EHT Operation Information
> Present
> > > .... ...1 = EHT Operation Information Present: True
> > > .... ..0. = Disabled Subchannel Bitmap Present: False
> > > .... .0.. = EHT Default PE Duration: False
> > > .... 0... = Group Addressed BU Indication Limit: False
> > > ..00 .... = Group Addressed BU Indication Exponent: 0
> > > 00.. .... = Reserved: 0x0
> > > Basic EHT-MCS And Nss Set: 0x44444444
> > this means AP requires STA NSS to be equal or larger than 4, however
> > WCN7850 only support 2, so connection in EHT is rejected.
> >
>
> The MCS Rx/Tx Max re maximum from my reading of the spec, not
> minimum's, the driver work out the max it supports in this case 2 and this
> less than 4 so it should work.
>
> > > Control: 0x02, Channel Width: 80 MHz EHT BSS bandwidth
> > > .... .010 = Channel Width: 80 MHz EHT BSS bandwidth (2)
> > > 0000 0... = Reserved: 0x00
> > > CCFS0: 0x0000006a
> > > CCFS1: 0x00000000
> > >
> > >
More information about the ath12k
mailing list