[PATCH 3/4] wifi: ath12k: use device index to advertise MLO parameter

[Karthikeyan Periyasamy]

Device index parameter is used as unique identifier for devices involved
in Inter-device MLO. It is also used to configure the MLO parameter within
the QMI host capability send request. While currently set to zero, future
logic will be added for inter device support to populate this parameter
with non-zero values.

Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1

Signed-off-by: Karthikeyan Periyasamy <quic_periyasa at quicinc.com>
---
 drivers/net/wireless/ath/ath12k/core.c | 10 ++++++++++
 drivers/net/wireless/ath/ath12k/qmi.c  |  4 ++--
 2 files changed, 12 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/ath/ath12k/core.c b/drivers/net/wireless/ath/ath12k/core.c
index b304895ee295..e82442540697 100644
--- a/drivers/net/wireless/ath/ath12k/core.c
+++ b/drivers/net/wireless/ath/ath12k/core.c
@@ -1562,6 +1562,16 @@ struct ath12k_base *ath12k_core_alloc(struct device *dev, size_t priv_size,
 	ab->qmi.num_radios = U8_MAX;
 	ab->mlo_capable_flags = ATH12K_INTRA_DEVICE_MLO_SUPPORT;
 
+	/* Device index used to identify the devices in a group.
+	 *
+	 * In Intra-device MLO, only one device present in a group,
+	 * so it is always zero.
+	 *
+	 * In Inter-device MLO, Multiple device present in a group,
+	 * expect non-zero value.
+	 */
+	ab->device_id = 0;
+
 	return ab;
 
 err_free_wq:
diff --git a/drivers/net/wireless/ath/ath12k/qmi.c b/drivers/net/wireless/ath/ath12k/qmi.c
index b37ab6244931..a9946f0f6bd8 100644
--- a/drivers/net/wireless/ath/ath12k/qmi.c
+++ b/drivers/net/wireless/ath/ath12k/qmi.c
@@ -2041,7 +2041,7 @@ static void ath12k_host_cap_parse_mlo(struct ath12k_base *ab,
 	req->mlo_capable_valid = 1;
 	req->mlo_capable = 1;
 	req->mlo_chip_id_valid = 1;
-	req->mlo_chip_id = 0;
+	req->mlo_chip_id = ab->device_id;
 	req->mlo_group_id_valid = 1;
 	req->mlo_group_id = 0;
 	req->max_mlo_peer_valid = 1;
@@ -2053,7 +2053,7 @@ static void ath12k_host_cap_parse_mlo(struct ath12k_base *ab,
 	req->mlo_num_chips = 1;
 
 	info = &req->mlo_chip_info[0];
-	info->chip_id = 0;
+	info->chip_id = ab->device_id;
 	info->num_local_links = ab->qmi.num_radios;
 
 	for (i = 0; i < info->num_local_links; i++) {
-- 
2.34.1