[PATCH 4/5] wifi: ath12k: remove redundant peer delete

[kangyang]

From: Kang Yang <quic_kangyang at quicinc.com>

Firmware will create internal peer for monitor mode. For host no need to
do peer create and peer delete.

So remove related code.

Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3

Signed-off-by: Kang Yang <quic_kangyang at quicinc.com>
---
 drivers/net/wireless/ath/ath12k/mac.c | 5 -----
 1 file changed, 5 deletions(-)

diff --git a/drivers/net/wireless/ath/ath12k/mac.c b/drivers/net/wireless/ath/ath12k/mac.c
index 9a2823bcf8fc..f994a78e7dc5 100644
--- a/drivers/net/wireless/ath/ath12k/mac.c
+++ b/drivers/net/wireless/ath/ath12k/mac.c
@@ -7354,11 +7354,6 @@ ath12k_mac_op_unassign_vif_chanctx(struct ieee80211_hw *hw,
 
 	WARN_ON(!arvif->is_started);
 
-	if (ab->hw_params->vdev_start_delay &&
-	    arvif->vdev_type == WMI_VDEV_TYPE_MONITOR &&
-	    ath12k_peer_find_by_addr(ab, ar->mac_addr))
-		ath12k_peer_delete(ar, arvif->vdev_id, ar->mac_addr);
-
 	if (arvif->vdev_type == WMI_VDEV_TYPE_MONITOR) {
 		ret = ath12k_mac_monitor_stop(ar);
 		if (ret) {
-- 
2.34.1