[PATCH v10 1/4] wifi: ath12k: ACPI TAS support

[Kalle Valo]

Lingbo Kong <quic_lingbok at quicinc.com> wrote:

> Currently, ath12k does not support Time-Average-SAR (TAS). In order to enable
> TAS read the tables from ACPI and send them to the firmware using
> WMI_PDEV_SET_BIOS_INTERFACE_CMDID command. Besides, ath12k registers an ACPI
> event callback so that ACPI can notify ath12k to get the updated SAR power
> table and sends it to the firmware when the device state is changed.
> 
> ACPI is only enabled for WCN7850 using struct ath12k_hw_params::acpi_guid
> field. Most likely QCN9274 will never support ACPI as the chip is not used in
> laptops.
> 
> Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4
> 
> Signed-off-by: Lingbo Kong <quic_lingbok at quicinc.com>
> Signed-off-by: Kalle Valo <quic_kvalo at quicinc.com>

4 patches applied to ath-next branch of ath.git, thanks.

576771c9fa21 wifi: ath12k: ACPI TAS support
764883be7ed0 wifi: ath12k: ACPI SAR support
12bccacbcd9e wifi: ath12k: ACPI CCA threshold support
7b5f3cbfb468 wifi: ath12k: ACPI band edge channel power support

-- 
https://patchwork.kernel.org/project/linux-wireless/patch/20240422033054.979-2-quic_lingbok@quicinc.com/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches