[PATCH 06/13] wifi: nl80211: send iface combination to user space in multi-hardware wiphy

[Karthikeyan Periyasamy]

On 3/29/2024 8:04 PM, Vasanthakumar Thiagarajan wrote:
> 
> 
> On 3/28/2024 7:03 PM, Johannes Berg wrote:
>> On Thu, 2024-03-28 at 12:59 +0530, Karthikeyan Periyasamy wrote:
>>>
>>> + *    When describing per-hardware combinations in multi-hardware in
>>> + *    one wiphy model, the first possibility can further include the 
>>> finer
>>> + *    capabilities like below
>>
>> Not sure I'd say "below" rather than e.g. "like this:"
>>
>>> + *    hw_chan_idx = 0, numbers = [ #{STA} <= 1, #{AP} <= 1 ],
>>> + *    channels = 1, max = 2
>>> + *    => allows a STA plus an AP interface on the underlying 
>>> hardware mac
>>> + *       advertised at index 0 in wiphy @hw_chans array.
>>> + *    hw_chan_idx = 1, numbers = [ #{STA} <= 1, #{AP} <= 2 ],
>>> + *    channels = 1, max = 3
>>> + *    => allows a STA plus two AP interfaces on the underlying 
>>> hardware mac
>>> + *       advertised at index 1 in wiphy @hw_chans array.
>>
>> Have you checked the rst output for this? Seems likely that's not going
>> to be great with that formatting, but I haven't checked.
>>
>>> + * @NL80211_IFACE_COMB_PER_HW_COMB_HW_IDX: u8 attribute specifying 
>>> the index
>>> + *    to the wiphy @hw_chans list for which the iface combination is 
>>> being
>>> + *    described.
>>
>> "@hw_chans" doesn't make sense here, this is nl80211, it should refer to
>> some attribute
>>
>> but why didn't you just _say_ in the patch 2 discussion that it's used
>> here ...
>>
>>> + * @NL80211_IFACE_COMB_PER_HW_COMB_LIMITS: nested attribute 
>>> containing the
>>> + *    limits for the given interface types, see
>>> + *    &enum nl80211_iface_limit_attrs.
>>> + * @NL80211_IFACE_COMB_PER_HW_COMB_MAXIMUM: u32 attribute giving the 
>>> maximum
>>> + *    number of interfaces that can be created in this group. This 
>>> number
>>> + *    does not apply to the interfaces purely managed in software.
>>> + * @NL80211_IFACE_COMB_PER_HW_COMB_NUM_CHANNELS: u32 attribute 
>>> specifying the
>>> + *    number of different channels that can be used in this group.
>>> + * @NUM_NL80211_IFACE_COMB_PER_HW_COMB: number of attributes
>>> + * @MAX_NL80211_IFACE_COMB_PER_HW_COMB: highest attribute number
>>> + */
>>> +enum nl80211_if_comb_per_hw_comb_attrs {
>>> +    NL80211_IFACE_COMB_PER_HW_COMB_UNSPEC,
>>> +    NL80211_IFACE_COMB_PER_HW_COMB_HW_IDX,
>>> +    NL80211_IFACE_COMB_PER_HW_COMB_LIMITS,
>>> +    NL80211_IFACE_COMB_PER_HW_COMB_MAXIMUM,
>>> +    NL80211_IFACE_COMB_PER_HW_COMB_NUM_CHANNELS,
>>
>> Almost all these attributes duplicate - including their docs -
>> attributes from enum nl80211_if_combination_attrs. Is it really worth
>> doing that, rather than adding NL80211_IFACE_COMB_HW_IDX and documenting
>> the different uses of the attribute set?
>>
> 
> I agree, more duplication. So we have to have the per_hw_comb_attrs
> defines like below?
> 
> enum nl80211_if_comb_per_hw_comb_attrs {
>      NL80211_IFACE_COMB_PER_HW_COMB_UNSPEC,
>      NL80211_IFACE_COMB_PER_HW_COMB_HW_IDX =
>              NL80211_IFACE_COMB_NUM_CHANNELS + 1,
>      /* keep last */
>      NUM_NL80211_IFACE_COMB_PER_HW_COMB,
>      MAX_NL80211_IFACE_COMB_PER_HW_COMB =
>              NUM_NL80211_IFACE_COMB_PER_HW_COMB - 1
> };
> 

I agree this approach. Instead of NUM_NL80211_IFACE_COMB_PER_HW_COMB, 
shall we have MAX_NL80211_IFACE_COMB like below so that hw_idx attribute 
value will not get conflict to any IFACE combination attributes

  enum nl80211_if_comb_per_hw_comb_attrs {
       NL80211_IFACE_COMB_PER_HW_COMB_UNSPEC,
       NL80211_IFACE_COMB_PER_HW_COMB_HW_IDX =
               MAX_NL80211_IFACE_COMB + 1,
       /* keep last */
       NUM_NL80211_IFACE_COMB_PER_HW_COMB,
       MAX_NL80211_IFACE_COMB_PER_HW_COMB =
               NUM_NL80211_IFACE_COMB_PER_HW_COMB - 1
};


-- 
Karthikeyan Periyasamy
--
கார்த்திகேயன் பெரியசாமி