[PATCH v6 00/12] wifi: ath12k: Add single wiphy suppor

[Jeff Johnson]

On 4/1/2024 12:03 PM, Rameshkumar Sundaram wrote:
> From: Sriram R <quic_srirrama at quicinc.com>
> 
> With the introduction of Multi Link Operation (MLO) support in
> IEEE802.11be, each EHT AP/non AP interface is capable of
> operating with multiple radio links.
> 
> cfg80211/mac80211 expects drivers to abstract the communication
> between such Multi Link HW and mac80211/cfg80211 since it depends
> on different driver/HW implementation. Hence the single wiphy
> abstraction with changes in datastructures were introduced in
> "wifi: ath12k: Introduce hw abstraction"
> 
> This patchset extends the implementation to allow combination
> of multiple underlying radios into a single composite hw/wiphy
> for registration. Since now multiple radios are represented by
> a single wiphy, changes are required in various mac ops that the
> driver supports since the driver now needs to learn on how to tunnel
> various mac ops properly to a specific radio.
> 
> This patchset covers the basic mac80211 ops for an interface bring up
> and operation.
> 
> Note:
> Monitor and hw reconfig support for Single Wiphy will be done in future
> patchsets.

thinking about this series in the context of some other patches I've been
reviewing recently, I don't think this series should be talking about
supporting multiple radios with a single wiphy, but instead about supporting
multiple devices with a single wiphy. After all, the existing logic already
supports a single device with multiple radios, so it isn't the multitude of
radios that is the issue, it is the multitude of devices.

this would have ramifications on many of the commit messages in this series.