[PATCH v5 5/9] block: implement NVMEM provider
Bartosz Golaszewski
brgl at kernel.org
Mon Jun 15 01:53:26 PDT 2026
On Fri, 12 Jun 2026 15:20:57 +0200, Loic Poulain
<loic.poulain at oss.qualcomm.com> said:
> From: Daniel Golle <daniel at makrotopia.org>
>
> On embedded devices using an eMMC it is common that one or more partitions
> on the eMMC are used to store MAC addresses and Wi-Fi calibration EEPROM
> data. Allow referencing the partition in device tree for the kernel and
> Wi-Fi drivers accessing it via the NVMEM layer.
>
> For now, NVMEM is only registered for the whole disk block device, as the
> OF node is currently only associated to it.
>
> Signed-off-by: Daniel Golle <daniel at makrotopia.org>
> Co-developed-by: Loic Poulain <loic.poulain at oss.qualcomm.com>
> Signed-off-by: Loic Poulain <loic.poulain at oss.qualcomm.com>
> ---
> block/Kconfig | 9 ++++
> block/Makefile | 1 +
> block/blk-nvmem.c | 109 ++++++++++++++++++++++++++++++++++++++++++++++
> block/blk.h | 8 ++++
> block/genhd.c | 4 ++
> include/linux/blk_types.h | 3 ++
> include/linux/blkdev.h | 1 +
> 7 files changed, 135 insertions(+)
>
> diff --git a/block/Kconfig b/block/Kconfig
> index 15027963472d7b40e27b9097a5993c457b5b3054..0b33747e16dc33473683706f75c92bdf8b648f7c 100644
> --- a/block/Kconfig
> +++ b/block/Kconfig
> @@ -209,6 +209,15 @@ config BLK_INLINE_ENCRYPTION_FALLBACK
> by falling back to the kernel crypto API when inline
> encryption hardware is not present.
>
> +config BLK_NVMEM
> + bool "Block device NVMEM provider"
> + depends on OF
> + depends on NVMEM
> + help
> + Allow block devices (or partitions) to act as NVMEM providers,
> + typically used with eMMC to store MAC addresses or Wi-Fi
> + calibration data on embedded devices.
> +
> source "block/partitions/Kconfig"
>
> config BLK_PM
> diff --git a/block/Makefile b/block/Makefile
> index 7dce2e44276c4274c11a0a61121c83d9c43d6e0c..d7ac389e71902bc091a8800ea266190a43b3e63d 100644
> --- a/block/Makefile
> +++ b/block/Makefile
> @@ -36,3 +36,4 @@ obj-$(CONFIG_BLK_INLINE_ENCRYPTION) += blk-crypto.o blk-crypto-profile.o \
> blk-crypto-sysfs.o
> obj-$(CONFIG_BLK_INLINE_ENCRYPTION_FALLBACK) += blk-crypto-fallback.o
> obj-$(CONFIG_BLOCK_HOLDER_DEPRECATED) += holder.o
> +obj-$(CONFIG_BLK_NVMEM) += blk-nvmem.o
> diff --git a/block/blk-nvmem.c b/block/blk-nvmem.c
> new file mode 100644
> index 0000000000000000000000000000000000000000..c005f059d9fe56242ebaef9905673dff902b5686
> --- /dev/null
> +++ b/block/blk-nvmem.c
> @@ -0,0 +1,109 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +/*
> + * block device NVMEM provider
> + *
> + * Copyright (c) 2024 Daniel Golle <daniel at makrotopia.org>
> + * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
> + *
> + * Useful on devices using a partition on an eMMC for MAC addresses or
> + * Wi-Fi calibration EEPROM data.
> + */
> +
> +#include <linux/file.h>
> +#include <linux/nvmem-provider.h>
> +#include <linux/nvmem-consumer.h>
> +#include <linux/of.h>
> +#include <linux/pagemap.h>
> +#include <linux/property.h>
> +
> +#include "blk.h"
> +
> +static int blk_nvmem_reg_read(void *priv, unsigned int from, void *val, size_t bytes)
> +{
> + blk_mode_t mode = BLK_OPEN_READ | BLK_OPEN_RESTRICT_WRITES;
> + dev_t devt = (dev_t)(uintptr_t)priv;
> + size_t bytes_left = bytes;
> + loff_t pos = from;
> + int ret = 0;
> +
> + struct file *bdev_file __free(fput) = bdev_file_open_by_dev(devt, mode, priv, NULL);
> + if (IS_ERR(bdev_file))
> + return PTR_ERR(bdev_file);
> +
> + while (bytes_left) {
> + pgoff_t f_index = pos >> PAGE_SHIFT;
> + struct folio *folio;
> + size_t folio_off;
> + size_t to_read;
> +
> + folio = read_mapping_folio(bdev_file->f_mapping, f_index, NULL);
> + if (IS_ERR(folio)) {
> + ret = PTR_ERR(folio);
> + break;
> + }
> +
> + folio_off = offset_in_folio(folio, pos);
> + to_read = min(bytes_left, folio_size(folio) - folio_off);
> + memcpy_from_folio(val, folio, folio_off, to_read);
> + pos += to_read;
> + bytes_left -= to_read;
> + val += to_read;
> + folio_put(folio);
> + }
> +
> + return ret;
> +}
> +
> +void blk_nvmem_add(struct block_device *bdev)
> +{
> + struct device *dev = &bdev->bd_device;
> + struct nvmem_config config = {};
> +
> + /* skip devices which do not have a device tree node */
> + if (!dev_of_node(dev))
> + return;
> +
> + /* skip devices without an nvmem layout defined */
> + struct device_node *child __free(device_node) =
> + of_get_child_by_name(dev_of_node(dev), "nvmem-layout");
> + if (!child)
> + return;
> +
> + /*
> + * skip block device too large to be represented as NVMEM devices,
> + * the NVMEM reg_read callback uses an unsigned int offset
> + */
> + if (bdev_nr_bytes(bdev) > UINT_MAX) {
> + dev_warn(dev, "block device too large to be an NVMEM provider\n");
> + return;
> + }
> +
> + config.id = NVMEM_DEVID_NONE;
> + config.dev = dev;
> + config.name = dev_name(dev);
> + config.owner = THIS_MODULE;
> + config.priv = (void *)(uintptr_t)dev->devt;
> + config.reg_read = blk_nvmem_reg_read;
> + config.size = bdev_nr_bytes(bdev);
> + config.word_size = 1;
> + config.stride = 1;
> + config.read_only = true;
> + config.root_only = true;
> + config.ignore_wp = true;
> + config.of_node = to_of_node(dev->fwnode);
> +
> + bdev->bd_nvmem = nvmem_register(&config);
> + if (IS_ERR(bdev->bd_nvmem)) {
> + dev_err_probe(dev, PTR_ERR(bdev->bd_nvmem),
> + "Failed to register NVMEM device\n");
Using dev_err_probe() only makes sense with a return value. Which makes me
think: we won't retry this after a probe deferral. I think we should return
int from this function just for this use-case. Also: if we *do* have
a layout, shouldn't we treat a failure to register the nvmem provider as
a an error and propagate it up the stack?
> + bdev->bd_nvmem = NULL;
> + }
> +}
> +
> +void blk_nvmem_del(struct block_device *bdev)
> +{
> + if (bdev->bd_nvmem)
Nvmem core already performs a NULL check.
> + nvmem_unregister(bdev->bd_nvmem);
> +
> + bdev->bd_nvmem = NULL;
> +}
> diff --git a/block/blk.h b/block/blk.h
> index ec4674cdf2ead4fd259ff5fc42401f591e684ee9..cd3c7ca723391c40be56f1dd4810e641b7c8a2b3 100644
> --- a/block/blk.h
> +++ b/block/blk.h
> @@ -757,4 +757,12 @@ static inline void blk_debugfs_unlock(struct request_queue *q,
> memalloc_noio_restore(memflags);
> }
>
> +#ifdef CONFIG_BLK_NVMEM
> +void blk_nvmem_add(struct block_device *bdev);
> +void blk_nvmem_del(struct block_device *bdev);
> +#else
> +static inline void blk_nvmem_add(struct block_device *bdev) {}
> +static inline void blk_nvmem_del(struct block_device *bdev) {}
> +#endif
> +
> #endif /* BLK_INTERNAL_H */
> diff --git a/block/genhd.c b/block/genhd.c
> index 7d6854fd28e95ae9134309679a7c6a937f5b7db8..1b2382de6fb30c1e5f60f45c04dc03ed3bf5d5f2 100644
> --- a/block/genhd.c
> +++ b/block/genhd.c
> @@ -421,6 +421,8 @@ static void add_disk_final(struct gendisk *disk)
> */
> dev_set_uevent_suppress(ddev, 0);
> disk_uevent(disk, KOBJ_ADD);
> +
> + blk_nvmem_add(disk->part0);
> }
>
> blk_apply_bdi_limits(disk->bdi, &disk->queue->limits);
> @@ -704,6 +706,8 @@ static void __del_gendisk(struct gendisk *disk)
>
> disk_del_events(disk);
>
> + blk_nvmem_del(disk->part0);
> +
> /*
> * Prevent new openers by unlinked the bdev inode.
> */
> diff --git a/include/linux/blk_types.h b/include/linux/blk_types.h
> index 8808ee76e73c09e0ceaac41ba59e86fb0c4efc64..ace6f59b860d0813665b2f62a1c03a1f4be94059 100644
> --- a/include/linux/blk_types.h
> +++ b/include/linux/blk_types.h
> @@ -73,6 +73,9 @@ struct block_device {
> int bd_writers;
> #ifdef CONFIG_SECURITY
> void *bd_security;
> +#endif
> +#ifdef CONFIG_BLK_NVMEM
> + struct nvmem_device *bd_nvmem;
> #endif
> /*
> * keep this out-of-line as it's both big and not needed in the fast
> diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
> index 890128cdea1ce66863c5baa36f3b336ec4550807..f15d2b5bf9e4fd2368b8a70416a978e22c0d4333 100644
> --- a/include/linux/blkdev.h
> +++ b/include/linux/blkdev.h
> @@ -30,6 +30,7 @@
>
> struct module;
> struct request_queue;
> +struct nvmem_device;
> struct elevator_queue;
> struct blk_trace;
> struct request;
>
> --
> 2.34.1
>
>
I like this approach better than the previous one.
Thanks,
Bartosz
More information about the ath10k
mailing list