[PATCH v3 7/7] Bluetooth: qca: Set NVMEM BD address quirks when address is invalid

[Loic Poulain]

When the controller BD address is invalid (zero or default),
set the NVMEM quirks to allow retrieving the address from a
'local-bd-address' NVMEM cell. The BD address is often stored
alongside the WiFi MAC address in big-endian format, so also
set the big-endian quirk.

Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski at oss.qualcomm.com>
Signed-off-by: Loic Poulain <loic.poulain at oss.qualcomm.com>
---
 arch/arm64/boot/dts/qcom/qrb2210-arduino-imola.dts | 39 ++++++++++++++++++++++
 drivers/bluetooth/btqca.c                          |  5 ++-
 2 files changed, 43 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/qrb2210-arduino-imola.dts b/arch/arm64/boot/dts/qcom/qrb2210-arduino-imola.dts
index bf088fa9807f040f0c8f405f9111b01790b09377..128c7a7e76b5b089044745f5d6407d6391055fc2 100644
--- a/arch/arm64/boot/dts/qcom/qrb2210-arduino-imola.dts
+++ b/arch/arm64/boot/dts/qcom/qrb2210-arduino-imola.dts
@@ -409,7 +409,40 @@ &sdhc_1 {
 	no-sdio;
 	no-sd;
 
+	#address-cells = <1>;
+	#size-cells = <0>;
+
 	status = "okay";
+
+	card at 0 {
+		compatible = "mmc-card";
+		reg = <0>;
+
+		partitions-boot1 {
+			compatible = "fixed-partitions";
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			nvmem-layout {
+				compatible = "fixed-layout";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				wifi_mac_addr: mac-addr at 4400 {
+					compatible = "mac-base";
+					reg = <0x4400 0x6>;
+					#nvmem-cell-cells = <1>;
+				};
+
+				bd_addr: bd-addr at 5400 {
+					compatible = "mac-base";
+					reg = <0x5400 0x6>;
+					#nvmem-cell-cells = <1>;
+				};
+			};
+		};
+	};
 };
 
 &spi5 {
@@ -512,6 +545,9 @@ bluetooth {
 		vddch0-supply = <&pm4125_l22>;
 		enable-gpios = <&tlmm 87 GPIO_ACTIVE_HIGH>;
 		max-speed = <3000000>;
+
+		nvmem-cells = <&bd_addr 0>;
+		nvmem-cell-names = "local-bd-address";
 	};
 };
 
@@ -557,6 +593,9 @@ &wifi {
 	qcom,ath10k-calibration-variant = "ArduinoImola";
 	firmware-name = "qcm2290";
 
+	nvmem-cells = <&wifi_mac_addr 0>;
+	nvmem-cell-names = "mac-address";
+
 	status = "okay";
 };
 
diff --git a/drivers/bluetooth/btqca.c b/drivers/bluetooth/btqca.c
index dda76365726f0bfe0e80e05fe04859fa4f0592e1..df33eacfd29fa680f393f90215150743e6001d5b 100644
--- a/drivers/bluetooth/btqca.c
+++ b/drivers/bluetooth/btqca.c
@@ -721,8 +721,11 @@ static int qca_check_bdaddr(struct hci_dev *hdev, const struct qca_fw_config *co
 	}
 
 	bda = (struct hci_rp_read_bd_addr *)skb->data;
-	if (!bacmp(&bda->bdaddr, &config->bdaddr))
+	if (!bacmp(&bda->bdaddr, &config->bdaddr)) {
 		hci_set_quirk(hdev, HCI_QUIRK_USE_BDADDR_PROPERTY);
+		hci_set_quirk(hdev, HCI_QUIRK_USE_BDADDR_NVMEM);
+		hci_set_quirk(hdev, HCI_QUIRK_BDADDR_NVMEM_BE);
+	}
 
 	kfree_skb(skb);
 

-- 
2.34.1