[PATCH 1/5] dt-bindings: wireless: ath10k: Strip ath10k prefix from calibration properties

[Krzysztof Kozlowski]

Devicetree properties describing exactly the same thing should be
reusable between device bindings.  All Qualcomm Atheros WiFi chips needs
certain calibration data, so properties should not be prefixed with
device family (ath10k).

Deprecate qcom,ath10k-calibration-variant and alike, so we gradually
switch to a common property.  This will also allow moving these
properties to common schema, if desired.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>

---

Why? Because people add qcom,ath12k-calibration-data and probably they
will add qcom,ath13k-calibration-data, qcom,ath14k-calibration-data and
so on.
---
 .../bindings/net/wireless/qcom,ath10k.yaml         | 25 ++++++++++++++++++++--
 1 file changed, 23 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.yaml b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.yaml
index aace072e2d52a6830b98dd3f52d61380105c8aa1..f2440d39b7ebcda77db592de85573bec902fb334 100644
--- a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.yaml
+++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.yaml
@@ -92,20 +92,41 @@ properties:
 
   ieee80211-freq-limit: true
 
-  qcom,ath10k-calibration-data:
+  qcom,calibration-data:
     $ref: /schemas/types.yaml#/definitions/uint8-array
     description:
       Calibration data + board-specific data as a byte array. The length
       can vary between hardware versions.
 
-  qcom,ath10k-calibration-variant:
+  qcom,ath10k-calibration-data:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    deprecated: true
+    description:
+      Calibration data + board-specific data as a byte array. The length
+      can vary between hardware versions.
+
+  qcom,calibration-variant:
     $ref: /schemas/types.yaml#/definitions/string
     description:
       Unique variant identifier of the calibration data in board-2.bin
       for designs with colliding bus and device specific ids
 
+  qcom,ath10k-calibration-variant:
+    $ref: /schemas/types.yaml#/definitions/string
+    deprecated: true
+    description:
+      Unique variant identifier of the calibration data in board-2.bin
+      for designs with colliding bus and device specific ids
+
+  qcom,pre-calibration-data:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    description:
+      Pre-calibration data as a byte array. The length can vary between
+      hardware versions.
+
   qcom,ath10k-pre-calibration-data:
     $ref: /schemas/types.yaml#/definitions/uint8-array
+    deprecated: true
     description:
       Pre-calibration data as a byte array. The length can vary between
       hardware versions.

-- 
2.43.0