ath10k-firmware: QCA4019 hw1.0: Add Meraki MR30H specific BDFs

[Jeff Johnson]

On 6/29/2025 1:23 AM, Hal Martin wrote:
> Hi,
> 
> I am adding support for the Meraki MR30H in OpenWrt. [1] This AP requires
> two special BDFs to get the Wi-Fi PHYs working (correctly). The bmi-board-
> id='s are the same as the existing MR33, although they are physically
> different devices (e.g. not just a board revision). The Meraki
> firmware uses different BDFs for the MR33 and MR30H.
> 
> For the questions from the wiki page [2]:
> 
> * description for what hardware this is:
> 
>   - IPQ4029 based board
>   - one QCA40xx radio is used as 2.4GHz radio
>   - one QCA40xx radio is used as 5GHz radio
> 
> * origin of the board file (did you create it yourself or where you
>   downloaded)
> 
>   - the files were extracted from the MR30H running a Meraki firmware
> released in late 2024
> 
> * ids to be used with the board file (ATH10K_BD_IE_BOARD_NAME in ath10k)
> 
>   - QCA4019 hw1.0
> 
>     + bus=ahb,bmi-chip-id=0,bmi-board-id=20,variant=Meraki-MR30H.bin
>       sha256sum:
>       ed3df7db8129b4f53516c75df40a0a0379c7d90f7030573458a8a618dd22bbab
>     + bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=Meraki-MR30H.bin
>       sha256sum:
>       d295477e5c098cef61d74dc7417c435ab6bcef6d8851ca3d21ea1bbf28b00431
> 
> * attach the actual board file (board.bin)
> 
>   - The name of the files are equal to the id string in the board-2.bin
>     (minus the ".bin")
> 
> Kind regards,
> Hal Martin
> 
> [1] https://github.com/openwrt/openwrt/pull/17026
> 
> [2] https://wireless.wiki.kernel.org/en/users/drivers/ath10k/boardfiles

Thanks, added to QCA4019/hw1.0/board-2.bin:

New:
bus=ahb,bmi-chip-id=0,bmi-board-id=20,variant=Meraki-MR30H
bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=Meraki-MR30H

Changed:


Deleted:

2 board image(s) added, 0 changed, 0 deleted, 154 in total

https://git.codelinaro.org/clo/ath-firmware/ath10k-firmware/-/commit/9a29a8cc856015ff01079a82a8c3554b301c319c