[PATCH] wifi: ath10k: add hw_params for Atheros QCA9377-7

[Tomas Paukrt]

Add hw_params for modules based on Atheros QCA9377-7 chipset like
8devices BLUE bean or SparkLAN WUBQ-159ACN.

Tested-on: QCA9377 hw1.1 USB 0.0.0.111

Signed-off-by: Tomas Paukrt <tomaspaukrt at email.cz>
---
 drivers/net/wireless/ath/ath10k/core.c | 42 ++++++++++++++++++++++++++++++++++
 1 file changed, 42 insertions(+)

diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
index b329428..e2ababf 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -629,6 +629,48 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 	},
 	{
 		.id = QCA9377_HW_1_1_DEV_VERSION,
+		.dev_id = 0x9378,
+		.bus = ATH10K_BUS_USB,
+		.name = "qca9377 hw1.1 usb",
+		.patch_load_addr = QCA9377_HW_1_0_PATCH_LOAD_ADDR,
+		.uart_pin = 6,
+		.otp_exe_param = 0,
+		.channel_counters_freq_hz = 88000,
+		.max_probe_resp_desc_thres = 0,
+		.cal_data_len = 8124,
+		.fw = {
+			.dir = QCA9377_HW_1_0_FW_DIR,
+			.board_size = QCA9377_BOARD_DATA_SZ,
+			.board_ext_size = QCA9377_BOARD_EXT_DATA_SZ,
+		},
+		.rx_desc_ops = &qca988x_rx_desc_ops,
+		.hw_ops = &qca6174_ops,
+		.hw_clk = qca6174_clk,
+		.target_cpu_freq = 176000000,
+		.decap_align_bytes = 4,
+		.spectral_bin_discard = 0,
+		.spectral_bin_offset = 0,
+		.vht160_mcs_rx_highest = 0,
+		.vht160_mcs_tx_highest = 0,
+		.n_cipher_suites = 8,
+		.ast_skid_limit = 0x10,
+		.num_wds_entries = 0x20,
+		.target_64bit = false,
+		.rx_ring_fill_level = HTT_RX_RING_FILL_LEVEL,
+		.shadow_reg_support = false,
+		.rri_on_ddr = false,
+		.hw_filter_reset_required = true,
+		.fw_diag_ce_download = false,
+		.credit_size_workaround = false,
+		.tx_stats_over_pktlog = false,
+		.dynamic_sar_support = false,
+		.hw_restart_disconnect = false,
+		.use_fw_tx_credits = true,
+		.delay_unmap_buffer = false,
+		.mcast_frame_registration = false,
+	},
+	{
+		.id = QCA9377_HW_1_1_DEV_VERSION,
 		.dev_id = QCA9377_1_0_DEVICE_ID,
 		.bus = ATH10K_BUS_SDIO,
 		.name = "qca9377 hw1.1 sdio",
-- 
2.7.4