qca6174 hw3.2 target 0x05030000 chip_id 0x00340aff: firmware crashed!
Paul Menzel
pmenzel at molgen.mpg.de
Sun Dec 8 14:21:04 PST 2024
Dear Linux folks,
Today the Wi-Fi connection stopped working, and the logs contained:
[44177.000699] ath10k_pci 0000:3a:00.0: firmware crashed! (guid
1b4a40c5-4495-4c5b-9df9-b7395848239c)
[44177.000720] ath10k_pci 0000:3a:00.0: qca6174 hw3.2 target
0x05030000 chip_id 0x00340aff sub 1a56:1535
[44177.000731] ath10k_pci 0000:3a:00.0: kconfig debug 0 debugfs 0
tracing 0 dfs 0 testmode 0
[44177.002450] ath10k_pci 0000:3a:00.0: firmware ver
WLAN.RM.4.4.1-00309- api 6 features wowlan,ignore-otp,mfp crc32 0793bcf2
[44177.004168] ath10k_pci 0000:3a:00.0: board_file api 2 bmi_id N/A
crc32 d2863f91
[44177.004176] ath10k_pci 0000:3a:00.0: htt-ver 3.87 wmi-op 4
htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1
[44177.014494] ath10k_pci 0000:3a:00.0: failed to get memcpy hi
address for firmware address 4: -16
[44177.014498] ath10k_pci 0000:3a:00.0: failed to read firmware
dump area: -16
[44177.014500] ath10k_pci 0000:3a:00.0: Copy Engine register dump:
[44177.014508] ath10k_pci 0000:3a:00.0: [00]: 0x00034400 12 12
3 3
[44177.014517] ath10k_pci 0000:3a:00.0: [01]: 0x00034800 19 19
64 65
[44177.014525] ath10k_pci 0000:3a:00.0: [02]: 0x00034c00 39 37
36 37
[44177.014532] ath10k_pci 0000:3a:00.0: [03]: 0x00035000 20 20
22 20
[44177.014540] ath10k_pci 0000:3a:00.0: [04]: 0x00035400 6457 6457
222 158
[44177.014548] ath10k_pci 0000:3a:00.0: [05]: 0x00035800 0 0
64 0
[44177.014556] ath10k_pci 0000:3a:00.0: [06]: 0x00035c00 29 29
0 0
[44177.014563] ath10k_pci 0000:3a:00.0: [07]: 0x00036000 1 0
1 0
[44177.109219] ieee80211 phy0: Hardware restart was requested
[44177.429445] ath10k_pci 0000:3a:00.0: device successfully recovered
Please find the output of `dmesg` with two firmware crashes attached.
Looking through my logs since September 20th with Linux 6.11-rcX, this
is not the first firmware crash. The `guid` value differs pairwaise
between each of them.
Kind regards,
Paul
PS: Other times:
-- Boot caea92a03f6d4776926f451f8281ea31 --
Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: firmware crashed!
(guid 6eb9dc57-1295-4a53-b71d-a8aeba7281a1)
Sep 26 12:32:58 abreu kernel: ath10k_pci 0000:3a:00.0: firmware crashed!
(guid c4a6c6a2-3cf4-445e-b16b-2baa35d547f3)
Sep 26 12:46:02 abreu kernel: ath10k_pci 0000:3a:00.0: firmware crashed!
(guid b8c8a5f0-7ff7-45c3-8ecb-7ba8074ba6f7)
-- Boot 26e7175e65254625bf58276e9532773e --
Okt 23 12:11:20 abreu kernel: ath10k_pci 0000:3a:00.0: firmware crashed!
(guid 1b3f438c-339c-4ad1-9d82-92a96a07c3c2)
Earliest crash:
Sep 26 10:41:36 abreu kernel: Linux version 6.11.0-07273-g1e7530883cd2
(build at bohemianrhapsody.molgen.mpg.de) (gcc (Debian 14.2.0-5) 14.2.0,
GNU ld (GNU Binutils for Debian) 2.43.1) #12 SMP PREEMPT_DYNAMIC Sun Sep
22 09:57:36 CEST 2024
[…]
Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: firmware crashed!
(guid 6eb9dc57-1295-4a53-b71d-a8aeba7281a1)
Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: qca6174 hw3.2
target 0x05030000 chip_id 0x00340aff sub 1a56:1535
Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: kconfig debug 0
debugfs 0 tracing 0 dfs 0 testmode 0
Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: firmware ver
WLAN.RM.4.4.1-00309- api 6 features wowlan,ignore-otp,mfp crc32 0793bcf2
Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: board_file api 2
bmi_id N/A crc32 d2863f91
Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: htt-ver 3.87
wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1
Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: failed to get
memcpy hi address for firmware address 4: -16
Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: failed to read
firmware dump area: -16
Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: Copy Engine
register dump:
Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: [00]: 0x00034400
12 12 3 3
Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: [01]: 0x00034800
28 28 265 266
Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: [02]: 0x00034c00
29 27 90 91
Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: [03]: 0x00035000
15 15 17 15
Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: [04]: 0x00035400
3887 3887 217 153
Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: [05]: 0x00035800
0 0 64 0
Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: [06]: 0x00035c00
20 20 16 16
Sep 26 12:12:01 abreu kernel: ath10k_pci 0000:3a:00.0: [07]: 0x00036000
1 0 1 0
-------------- next part --------------
[ 0.000000] Linux version 6.13.0-rc1-00316-gb5f217084ab3 (build at bohemianrhapsody.molgen.mpg.de) (gcc (Debian 14.2.0-8) 14.2.0, GNU ld (GNU Binutils for Debian) 2.43.50.20241204) #37 SMP PREEMPT_DYNAMIC Sat Dec 7 07:34:03 CET 2024
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-6.13.0-rc1-00316-gb5f217084ab3 root=UUID=32e29882-d94d-4a92-9ee4-4d03002bfa29 ro quiet pci=noaer mem_sleep_default=deep log_buf_len=8M cryptomgr.notests
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000556aafff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000556ab000-0x00000000556abfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000556ac000-0x00000000556acfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000556ad000-0x0000000064df3fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000064df4000-0x000000006517ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000065180000-0x00000000651c3fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000651c4000-0x000000006f871fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000006f872000-0x000000006fffefff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000006ffff000-0x000000006fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000070000000-0x0000000077ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000078000000-0x00000000785fffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000078600000-0x000000007c7fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000004817fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] APIC: Static calls initialized
[ 0.000000] e820: update [mem 0x51a78018-0x51a88057] usable ==> usable
[ 0.000000] extended physical RAM map:
[ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000059000-0x000000000009dfff] usable
[ 0.000000] reserve setup_data: [mem 0x000000000009e000-0x00000000000fffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x0000000051a78017] usable
[ 0.000000] reserve setup_data: [mem 0x0000000051a78018-0x0000000051a88057] usable
[ 0.000000] reserve setup_data: [mem 0x0000000051a88058-0x00000000556aafff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000556ab000-0x00000000556abfff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x00000000556ac000-0x00000000556acfff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000556ad000-0x0000000064df3fff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000064df4000-0x000000006517ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000065180000-0x00000000651c3fff] ACPI data
[ 0.000000] reserve setup_data: [mem 0x00000000651c4000-0x000000006f871fff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x000000006f872000-0x000000006fffefff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000006ffff000-0x000000006fffffff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000070000000-0x0000000077ffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000078000000-0x00000000785fffff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000078600000-0x000000007c7fffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x00000004817fffff] usable
[ 0.000000] efi: EFI v2.4 by American Megatrends
[ 0.000000] efi: ACPI=0x6518d000 ACPI 2.0=0x6518d000 SMBIOS=0xf0000 SMBIOS 3.0=0xf0020 TPMFinalLog=0x6f812000 ESRT=0x6fc86698 MEMATTR=0x62679298 INITRD=0x5577da98 TPMEventLog=0x65188018
[ 0.000000] efi: Remove mem36: MMIO range=[0xe0000000-0xefffffff] (256MB) from e820 map
[ 0.000000] e820: remove [mem 0xe0000000-0xefffffff] reserved
[ 0.000000] efi: Not removing mem37: MMIO range=[0xfe000000-0xfe010fff] (68KB) from e820 map
[ 0.000000] efi: Not removing mem38: MMIO range=[0xfec00000-0xfec00fff] (4KB) from e820 map
[ 0.000000] efi: Not removing mem39: MMIO range=[0xfee00000-0xfee00fff] (4KB) from e820 map
[ 0.000000] efi: Remove mem40: MMIO range=[0xff000000-0xffffffff] (16MB) from e820 map
[ 0.000000] e820: remove [mem 0xff000000-0xffffffff] reserved
[ 0.000000] SMBIOS 3.0.0 present.
[ 0.000000] DMI: Dell Inc. XPS 13 9360/0596KF, BIOS 2.21.0 06/02/2022
[ 0.000000] DMI: Memory slots populated: 2/2
[ 0.000000] tsc: Detected 2900.000 MHz processor
[ 0.000000] tsc: Detected 2899.886 MHz TSC
[ 0.000805] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000807] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000813] last_pfn = 0x481800 max_arch_pfn = 0x400000000
[ 0.000817] MTRR map: 4 entries (3 fixed + 1 variable; max 23), built from 10 variable MTRRs
[ 0.000818] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.001108] last_pfn = 0x78600 max_arch_pfn = 0x400000000
[ 0.007066] esrt: Reserving ESRT space from 0x000000006fc86698 to 0x000000006fc866d0.
[ 0.007071] Using GB pages for direct mapping
[ 0.013390] printk: log buffer data + meta data: 8388608 + 29360128 = 37748736 bytes
[ 0.013391] printk: early log buf free: 125320(95%)
[ 0.013392] Secure boot disabled
[ 0.013393] RAMDISK: [mem 0x51a89000-0x52593fff]
[ 0.013396] ACPI: Early table checksum verification disabled
[ 0.013399] ACPI: RSDP 0x000000006518D000 000024 (v02 DELL )
[ 0.013402] ACPI: XSDT 0x000000006518D0C8 00010C (v01 DELL CBX3 01072009 AMI 00010013)
[ 0.013407] ACPI: FACP 0x00000000651B2A48 00010C (v05 DELL CBX3 01072009 AMI 00010013)
[ 0.013411] ACPI: DSDT 0x000000006518D260 0257E7 (v02 DELL CBX3 01072009 INTL 20160422)
[ 0.013414] ACPI: FACS 0x000000006F86F180 000040
[ 0.013415] ACPI: APIC 0x00000000651B2B58 000084 (v03 DELL CBX3 01072009 AMI 00010013)
[ 0.013418] ACPI: FPDT 0x00000000651B2BE0 000044 (v01 DELL CBX3 01072009 AMI 00010013)
[ 0.013419] ACPI: FIDT 0x00000000651B2C28 0000AC (v01 DELL CBX3 01072009 AMI 00010013)
[ 0.013422] ACPI: MCFG 0x00000000651B2CD8 00003C (v01 DELL CBX3 01072009 MSFT 00000097)
[ 0.013424] ACPI: HPET 0x00000000651B2D18 000038 (v01 DELL CBX3 01072009 AMI. 0005000B)
[ 0.013426] ACPI: SSDT 0x00000000651B2D50 000359 (v01 SataRe SataTabl 00001000 INTL 20160422)
[ 0.013428] ACPI: BOOT 0x00000000651B30B0 000028 (v01 DELL CBX3 01072009 AMI 00010013)
[ 0.013430] ACPI: SSDT 0x00000000651B30D8 0012CF (v02 SaSsdt SaSsdt 00003000 INTL 20160422)
[ 0.013432] ACPI: HPET 0x00000000651B43A8 000038 (v01 INTEL KBL-ULT 00000001 MSFT 0000005F)
[ 0.013434] ACPI: SSDT 0x00000000651B43E0 000D84 (v02 INTEL xh_rvp07 00000000 INTL 20160422)
[ 0.013436] ACPI: UEFI 0x00000000651B5168 000042 (v01 00000000 00000000)
[ 0.013438] ACPI: SSDT 0x00000000651B51B0 000EDE (v02 CpuRef CpuSsdt 00003000 INTL 20160422)
[ 0.013440] ACPI: LPIT 0x00000000651B6090 000094 (v01 INTEL KBL-ULT 00000000 MSFT 0000005F)
[ 0.013443] ACPI: WSMT 0x00000000651B6128 000028 (v01 DELL CBX3 00000000 MSFT 0000005F)
[ 0.013444] ACPI: SSDT 0x00000000651B6150 000161 (v02 INTEL HdaDsp 00000000 INTL 20160422)
[ 0.013450] ACPI: SSDT 0x00000000651B62B8 00029F (v02 INTEL sensrhub 00000000 INTL 20160422)
[ 0.013454] ACPI: SSDT 0x00000000651B6558 003002 (v02 INTEL PtidDevc 00001000 INTL 20160422)
[ 0.013456] ACPI: SSDT 0x00000000651B9560 0000DB (v02 INTEL TbtTypeC 00000000 INTL 20160422)
[ 0.013458] ACPI: DBGP 0x00000000651B9640 000034 (v01 INTEL 00000002 MSFT 0000005F)
[ 0.013460] ACPI: DBG2 0x00000000651B9678 000054 (v00 INTEL 00000002 MSFT 0000005F)
[ 0.013462] ACPI: SSDT 0x00000000651B96D0 0007DD (v02 INTEL UsbCTabl 00001000 INTL 20160422)
[ 0.013464] ACPI: SSDT 0x00000000651B9EB0 0084F1 (v02 DptfTa DptfTabl 00001000 INTL 20160422)
[ 0.013466] ACPI: SLIC 0x00000000651C23A8 000176 (v03 DELL CBX3 01072009 MSFT 00010013)
[ 0.013468] ACPI: NHLT 0x00000000651C2520 00002D (v00 INTEL EDK2 00000002 01000013)
[ 0.013470] ACPI: BGRT 0x00000000651C2550 000038 (v00 01072009 AMI 00010013)
[ 0.013472] ACPI: TPM2 0x00000000651C2588 000034 (v03 Tpm2Tabl 00000001 AMI 00000000)
[ 0.013474] ACPI: ASF! 0x00000000651C25C0 0000A0 (v32 INTEL HCG 00000001 TFSM 000F4240)
[ 0.013477] ACPI: DMAR 0x00000000651C2660 0000F0 (v01 INTEL KBL 00000001 INTL 00000001)
[ 0.013478] ACPI: Reserving FACP table memory at [mem 0x651b2a48-0x651b2b53]
[ 0.013479] ACPI: Reserving DSDT table memory at [mem 0x6518d260-0x651b2a46]
[ 0.013480] ACPI: Reserving FACS table memory at [mem 0x6f86f180-0x6f86f1bf]
[ 0.013481] ACPI: Reserving APIC table memory at [mem 0x651b2b58-0x651b2bdb]
[ 0.013481] ACPI: Reserving FPDT table memory at [mem 0x651b2be0-0x651b2c23]
[ 0.013482] ACPI: Reserving FIDT table memory at [mem 0x651b2c28-0x651b2cd3]
[ 0.013482] ACPI: Reserving MCFG table memory at [mem 0x651b2cd8-0x651b2d13]
[ 0.013483] ACPI: Reserving HPET table memory at [mem 0x651b2d18-0x651b2d4f]
[ 0.013484] ACPI: Reserving SSDT table memory at [mem 0x651b2d50-0x651b30a8]
[ 0.013484] ACPI: Reserving BOOT table memory at [mem 0x651b30b0-0x651b30d7]
[ 0.013485] ACPI: Reserving SSDT table memory at [mem 0x651b30d8-0x651b43a6]
[ 0.013485] ACPI: Reserving HPET table memory at [mem 0x651b43a8-0x651b43df]
[ 0.013486] ACPI: Reserving SSDT table memory at [mem 0x651b43e0-0x651b5163]
[ 0.013487] ACPI: Reserving UEFI table memory at [mem 0x651b5168-0x651b51a9]
[ 0.013487] ACPI: Reserving SSDT table memory at [mem 0x651b51b0-0x651b608d]
[ 0.013488] ACPI: Reserving LPIT table memory at [mem 0x651b6090-0x651b6123]
[ 0.013488] ACPI: Reserving WSMT table memory at [mem 0x651b6128-0x651b614f]
[ 0.013489] ACPI: Reserving SSDT table memory at [mem 0x651b6150-0x651b62b0]
[ 0.013490] ACPI: Reserving SSDT table memory at [mem 0x651b62b8-0x651b6556]
[ 0.013490] ACPI: Reserving SSDT table memory at [mem 0x651b6558-0x651b9559]
[ 0.013491] ACPI: Reserving SSDT table memory at [mem 0x651b9560-0x651b963a]
[ 0.013491] ACPI: Reserving DBGP table memory at [mem 0x651b9640-0x651b9673]
[ 0.013492] ACPI: Reserving DBG2 table memory at [mem 0x651b9678-0x651b96cb]
[ 0.013493] ACPI: Reserving SSDT table memory at [mem 0x651b96d0-0x651b9eac]
[ 0.013493] ACPI: Reserving SSDT table memory at [mem 0x651b9eb0-0x651c23a0]
[ 0.013494] ACPI: Reserving SLIC table memory at [mem 0x651c23a8-0x651c251d]
[ 0.013494] ACPI: Reserving NHLT table memory at [mem 0x651c2520-0x651c254c]
[ 0.013495] ACPI: Reserving BGRT table memory at [mem 0x651c2550-0x651c2587]
[ 0.013496] ACPI: Reserving TPM2 table memory at [mem 0x651c2588-0x651c25bb]
[ 0.013496] ACPI: Reserving ASF! table memory at [mem 0x651c25c0-0x651c265f]
[ 0.013497] ACPI: Reserving DMAR table memory at [mem 0x651c2660-0x651c274f]
[ 0.013614] No NUMA configuration found
[ 0.013615] Faking a node at [mem 0x0000000000000000-0x00000004817fffff]
[ 0.013625] NODE_DATA(0) allocated [mem 0x47f3d5680-0x47f3fffff]
[ 0.013793] Zone ranges:
[ 0.013794] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.013795] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.013797] Normal [mem 0x0000000100000000-0x00000004817fffff]
[ 0.013798] Device empty
[ 0.013798] Movable zone start for each node
[ 0.013800] Early memory node ranges
[ 0.013800] node 0: [mem 0x0000000000001000-0x0000000000057fff]
[ 0.013802] node 0: [mem 0x0000000000059000-0x000000000009dfff]
[ 0.013802] node 0: [mem 0x0000000000100000-0x00000000556aafff]
[ 0.013803] node 0: [mem 0x00000000556ad000-0x0000000064df3fff]
[ 0.013804] node 0: [mem 0x000000006ffff000-0x000000006fffffff]
[ 0.013804] node 0: [mem 0x0000000078000000-0x00000000785fffff]
[ 0.013805] node 0: [mem 0x0000000100000000-0x00000004817fffff]
[ 0.013807] Initmem setup node 0 [mem 0x0000000000001000-0x00000004817fffff]
[ 0.013811] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.013812] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.013833] On node 0, zone DMA: 98 pages in unavailable ranges
[ 0.016186] On node 0, zone DMA32: 2 pages in unavailable ranges
[ 0.016601] On node 0, zone DMA32: 45579 pages in unavailable ranges
[ 0.017117] On node 0, zone Normal: 31232 pages in unavailable ranges
[ 0.017367] On node 0, zone Normal: 26624 pages in unavailable ranges
[ 0.017375] Reserving Intel graphics memory at [mem 0x7a800000-0x7c7fffff]
[ 0.017554] ACPI: PM-Timer IO Port: 0x1808
[ 0.017559] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.017560] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.017561] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.017561] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.017588] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[ 0.017590] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.017591] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.017594] ACPI: Using ACPI (MADT) for SMP configuration information
[ 0.017595] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.017601] e820: update [mem 0x62260000-0x623ecfff] usable ==> reserved
[ 0.017609] TSC deadline timer available
[ 0.017612] CPU topo: Max. logical packages: 1
[ 0.017613] CPU topo: Max. logical dies: 1
[ 0.017613] CPU topo: Max. dies per package: 1
[ 0.017617] CPU topo: Max. threads per core: 2
[ 0.017617] CPU topo: Num. cores per package: 2
[ 0.017617] CPU topo: Num. threads per package: 4
[ 0.017618] CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs
[ 0.017636] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.017638] PM: hibernation: Registered nosave memory: [mem 0x00058000-0x00058fff]
[ 0.017639] PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x000fffff]
[ 0.017641] PM: hibernation: Registered nosave memory: [mem 0x51a78000-0x51a78fff]
[ 0.017642] PM: hibernation: Registered nosave memory: [mem 0x51a88000-0x51a88fff]
[ 0.017643] PM: hibernation: Registered nosave memory: [mem 0x556ab000-0x556abfff]
[ 0.017644] PM: hibernation: Registered nosave memory: [mem 0x556ac000-0x556acfff]
[ 0.017645] PM: hibernation: Registered nosave memory: [mem 0x62260000-0x623ecfff]
[ 0.017647] PM: hibernation: Registered nosave memory: [mem 0x64df4000-0x6517ffff]
[ 0.017647] PM: hibernation: Registered nosave memory: [mem 0x65180000-0x651c3fff]
[ 0.017648] PM: hibernation: Registered nosave memory: [mem 0x651c4000-0x6f871fff]
[ 0.017648] PM: hibernation: Registered nosave memory: [mem 0x6f872000-0x6fffefff]
[ 0.017649] PM: hibernation: Registered nosave memory: [mem 0x70000000-0x77ffffff]
[ 0.017651] PM: hibernation: Registered nosave memory: [mem 0x78600000-0x7c7fffff]
[ 0.017651] PM: hibernation: Registered nosave memory: [mem 0x7c800000-0xfdffffff]
[ 0.017652] PM: hibernation: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[ 0.017652] PM: hibernation: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
[ 0.017653] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.017653] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
[ 0.017654] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.017654] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xffffffff]
[ 0.017657] [mem 0x7c800000-0xfdffffff] available for PCI devices
[ 0.017659] Booting paravirtualized kernel on bare hardware
[ 0.017665] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.021885] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ 0.022156] percpu: Embedded 94 pages/cpu s290816 r65536 d28672 u524288
[ 0.022163] pcpu-alloc: s290816 r65536 d28672 u524288 alloc=1*2097152
[ 0.022165] pcpu-alloc: [0] 0 1 2 3
[ 0.022182] Kernel command line: BOOT_IMAGE=/vmlinuz-6.13.0-rc1-00316-gb5f217084ab3 root=UUID=32e29882-d94d-4a92-9ee4-4d03002bfa29 ro quiet pci=noaer mem_sleep_default=deep log_buf_len=8M cryptomgr.notests
[ 0.022250] Unknown kernel command line parameters "BOOT_IMAGE=/vmlinuz-6.13.0-rc1-00316-gb5f217084ab3", will be passed to user space.
[ 0.022274] random: crng init done
[ 0.023919] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[ 0.024668] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.024715] Fallback order for Node 0: 0
[ 0.024718] Built 1 zonelists, mobility grouping on. Total pages: 4090767
[ 0.024719] Policy zone: Normal
[ 0.024725] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
[ 0.024732] software IO TLB: area num 4.
[ 0.043406] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.043408] kmemleak: Kernel memory leak detector disabled
[ 0.043435] ftrace: allocating 43092 entries in 169 pages
[ 0.057377] ftrace: allocated 169 pages with 4 groups
[ 0.058042] Dynamic Preempt: voluntary
[ 0.058076] rcu: Preemptible hierarchical RCU implementation.
[ 0.058076] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[ 0.058077] Trampoline variant of Tasks RCU enabled.
[ 0.058078] Rude variant of Tasks RCU enabled.
[ 0.058078] Tracing variant of Tasks RCU enabled.
[ 0.058079] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.058079] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.058084] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[ 0.058086] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[ 0.058087] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[ 0.061534] NR_IRQS: 524544, nr_irqs: 1024, preallocated irqs: 16
[ 0.061744] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.061913] Console: colour dummy device 80x25
[ 0.061916] printk: legacy console [tty0] enabled
[ 0.061952] ACPI: Core revision 20240827
[ 0.062100] hpet: HPET dysfunctional in PC10. Force disabled.
[ 0.062154] APIC: Switch to symmetric I/O mode setup
[ 0.062161] DMAR: Host address width 39
[ 0.062162] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.062167] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e
[ 0.062169] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.062174] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
[ 0.062176] DMAR: RMRR base: 0x00000064ec2000 end: 0x00000064ee1fff
[ 0.062177] DMAR: RMRR base: 0x0000007a000000 end: 0x0000007c7fffff
[ 0.062178] DMAR: ANDD device: 1 name: \_SB.PCI0.I2C0
[ 0.062179] DMAR: ANDD device: 2 name: \_SB.PCI0.I2C1
[ 0.062181] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.062182] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.062184] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ 0.063805] DMAR-IR: Enabled IRQ remapping in x2apic mode
[ 0.063806] x2apic enabled
[ 0.063868] APIC: Switched APIC routing to: cluster x2apic
[ 0.067705] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x29ccd767b87, max_idle_ns: 440795223720 ns
[ 0.067710] Calibrating delay loop (skipped), value calculated using timer frequency.. 5799.77 BogoMIPS (lpj=11599544)
[ 0.067741] CPU0: Thermal monitoring enabled (TM1)
[ 0.067778] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[ 0.067779] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[ 0.067783] process: using mwait in idle threads
[ 0.067786] Spectre V2 : User space: Vulnerable
[ 0.067787] Speculative Store Bypass: Vulnerable
[ 0.067790] SRBDS: Vulnerable
[ 0.067795] GDS: Vulnerable
[ 0.067799] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.067800] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.067801] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.067802] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[ 0.067802] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[ 0.067803] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.067805] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
[ 0.067806] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
[ 0.067806] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[ 0.071709] Freeing SMP alternatives memory: 36K
[ 0.071709] pid_max: default: 32768 minimum: 301
[ 0.071709] LSM: initializing lsm=capability,landlock,apparmor,bpf
[ 0.071709] landlock: Up and running.
[ 0.071709] AppArmor: AppArmor initialized
[ 0.071709] LSM support for eBPF active
[ 0.071709] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.071709] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.071709] smpboot: CPU0: Intel(R) Core(TM) i7-7500U CPU @ 2.70GHz (family: 0x6, model: 0x8e, stepping: 0x9)
[ 0.071709] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[ 0.071709] ... version: 4
[ 0.071709] ... bit width: 48
[ 0.071709] ... generic registers: 4
[ 0.071709] ... value mask: 0000ffffffffffff
[ 0.071709] ... max period: 00007fffffffffff
[ 0.071709] ... fixed-purpose events: 3
[ 0.071709] ... event mask: 000000070000000f
[ 0.071709] signal: max sigframe size: 1616
[ 0.071709] Estimated ratio of average max frequency by base frequency (times 1024): 1235
[ 0.071709] rcu: Hierarchical SRCU implementation.
[ 0.071709] rcu: Max phase no-delay instances is 1000.
[ 0.071709] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
[ 0.071709] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.071709] smp: Bringing up secondary CPUs ...
[ 0.071709] smpboot: x86: Booting SMP configuration:
[ 0.071709] .... node #0, CPUs: #1 #2 #3
[ 0.071709] smp: Brought up 1 node, 4 CPUs
[ 0.071709] smpboot: Total of 4 processors activated (23199.08 BogoMIPS)
[ 0.091733] node 0 deferred pages initialised in 24ms
[ 0.093022] Memory: 15906080K/16363068K available (14336K kernel code, 2559K rwdata, 10216K rodata, 2880K init, 6356K bss, 446260K reserved, 0K cma-reserved)
[ 0.093022] devtmpfs: initialized
[ 0.093022] x86/mm: Memory block size: 128MB
[ 0.093022] ACPI: PM: Registering ACPI NVS region [mem 0x556ab000-0x556abfff] (4096 bytes)
[ 0.093022] ACPI: PM: Registering ACPI NVS region [mem 0x651c4000-0x6f871fff] (174776320 bytes)
[ 0.096218] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.096225] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.096275] pinctrl core: initialized pinctrl subsystem
[ 0.096725] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.096920] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
[ 0.097037] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.097163] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.097180] audit: initializing netlink subsys (disabled)
[ 0.097197] audit: type=2000 audit(1733554025.028:1): state=initialized audit_enabled=0 res=1
[ 0.097197] thermal_sys: Registered thermal governor 'fair_share'
[ 0.097197] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.097197] thermal_sys: Registered thermal governor 'step_wise'
[ 0.097197] thermal_sys: Registered thermal governor 'user_space'
[ 0.097197] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.097197] cpuidle: using governor ladder
[ 0.097197] cpuidle: using governor menu
[ 0.097197] Simple Boot Flag at 0x47 set to 0x80
[ 0.097197] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.097197] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.097197] PCI: ECAM [mem 0xe0000000-0xefffffff] (base 0xe0000000) for domain 0000 [bus 00-ff]
[ 0.097197] PCI: Using configuration type 1 for base access
[ 0.097197] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[ 0.097197] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.097197] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
[ 0.097197] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.097197] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[ 0.097197] ACPI: Added _OSI(Module Device)
[ 0.097197] ACPI: Added _OSI(Processor Device)
[ 0.097197] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.097197] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.129489] ACPI: 11 ACPI AML tables successfully acquired and loaded
[ 0.134053] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.140443] ACPI: Dynamic OEM Table Load:
[ 0.140449] ACPI: SSDT 0xFFFF9F5F818BCC00 0003FF (v02 PmRef Cpu0Cst 00003001 INTL 20160422)
[ 0.140452] ACPI: Dynamic OEM Table Load:
[ 0.140452] ACPI: SSDT 0xFFFF9F5F81821800 0006F6 (v02 PmRef Cpu0Ist 00003000 INTL 20160422)
[ 0.141297] ACPI: Dynamic OEM Table Load:
[ 0.141302] ACPI: SSDT 0xFFFF9F5F81824000 00065C (v02 PmRef ApIst 00003000 INTL 20160422)
[ 0.142319] ACPI: Dynamic OEM Table Load:
[ 0.142323] ACPI: SSDT 0xFFFF9F5F818FC000 00018A (v02 PmRef ApCst 00003000 INTL 20160422)
[ 0.144506] ACPI: EC: EC started
[ 0.144507] ACPI: EC: interrupt blocked
[ 0.149173] ACPI: EC: EC_CMD/EC_SC=0x934, EC_DATA=0x930
[ 0.149175] ACPI: \_SB_.PCI0.LPCB.ECDV: Boot DSDT EC used to handle transactions
[ 0.149177] ACPI: Interpreter enabled
[ 0.149212] ACPI: PM: (supports S0 S3 S4 S5)
[ 0.149215] ACPI: Using IOAPIC for interrupt routing
[ 0.149248] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.149249] PCI: Using E820 reservations for host bridge windows
[ 0.149763] ACPI: Enabled 8 GPEs in block 00 to 7F
[ 0.154398] ACPI: \_SB_.PCI0.RP09.PXSX.WRST: New power resource
[ 0.154655] ACPI: \_SB_.PCI0.RP10.PXSX.WRST: New power resource
[ 0.154911] ACPI: \_SB_.PCI0.RP11.PXSX.WRST: New power resource
[ 0.155162] ACPI: \_SB_.PCI0.RP12.PXSX.WRST: New power resource
[ 0.155411] ACPI: \_SB_.PCI0.RP13.PXSX.WRST: New power resource
[ 0.155661] ACPI: \_SB_.PCI0.RP01.PXSX.WRST: New power resource
[ 0.156293] ACPI: \_SB_.PCI0.RP02.PXSX.WRST: New power resource
[ 0.156544] ACPI: \_SB_.PCI0.RP03.PXSX.WRST: New power resource
[ 0.156794] ACPI: \_SB_.PCI0.RP04.PXSX.WRST: New power resource
[ 0.157048] ACPI: \_SB_.PCI0.RP05.PXSX.WRST: New power resource
[ 0.157297] ACPI: \_SB_.PCI0.RP06.PXSX.WRST: New power resource
[ 0.157547] ACPI: \_SB_.PCI0.RP07.PXSX.WRST: New power resource
[ 0.157800] ACPI: \_SB_.PCI0.RP08.PXSX.WRST: New power resource
[ 0.158060] ACPI: \_SB_.PCI0.RP17.PXSX.WRST: New power resource
[ 0.158316] ACPI: \_SB_.PCI0.RP18.PXSX.WRST: New power resource
[ 0.158566] ACPI: \_SB_.PCI0.RP19.PXSX.WRST: New power resource
[ 0.158820] ACPI: \_SB_.PCI0.RP20.PXSX.WRST: New power resource
[ 0.159870] ACPI: \_SB_.PCI0.RP14.PXSX.WRST: New power resource
[ 0.160121] ACPI: \_SB_.PCI0.RP15.PXSX.WRST: New power resource
[ 0.160371] ACPI: \_SB_.PCI0.RP16.PXSX.WRST: New power resource
[ 0.178928] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.178934] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 0.179088] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME]
[ 0.179372] acpi PNP0A08:00: _OSC: OS now controls [PCIeCapability LTR]
[ 0.179374] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.180093] PCI host bridge to bus 0000:00
[ 0.180096] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.180098] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.180100] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window]
[ 0.180101] pci_bus 0000:00: root bus resource [mem 0x7c800000-0xdfffffff window]
[ 0.180102] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
[ 0.180104] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.180118] pci 0000:00:00.0: [8086:5904] type 00 class 0x060000 conventional PCI endpoint
[ 0.180179] pci 0000:00:02.0: [8086:5916] type 00 class 0x030000 PCIe Root Complex Integrated Endpoint
[ 0.180186] pci 0000:00:02.0: BAR 0 [mem 0xdb000000-0xdbffffff 64bit]
[ 0.180190] pci 0000:00:02.0: BAR 2 [mem 0x90000000-0x9fffffff 64bit pref]
[ 0.180194] pci 0000:00:02.0: BAR 4 [io 0xf000-0xf03f]
[ 0.180207] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.180331] pci 0000:00:04.0: [8086:1903] type 00 class 0x118000 conventional PCI endpoint
[ 0.180338] pci 0000:00:04.0: BAR 0 [mem 0xdc320000-0xdc327fff 64bit]
[ 0.180580] pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330 conventional PCI endpoint
[ 0.180596] pci 0000:00:14.0: BAR 0 [mem 0xdc310000-0xdc31ffff 64bit]
[ 0.180649] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.181092] pci 0000:00:14.2: [8086:9d31] type 00 class 0x118000 conventional PCI endpoint
[ 0.181106] pci 0000:00:14.2: BAR 0 [mem 0xdc334000-0xdc334fff 64bit]
[ 0.181235] pci 0000:00:15.0: [8086:9d60] type 00 class 0x118000 conventional PCI endpoint
[ 0.181262] pci 0000:00:15.0: BAR 0 [mem 0xdc333000-0xdc333fff 64bit]
[ 0.181574] pci 0000:00:15.1: [8086:9d61] type 00 class 0x118000 conventional PCI endpoint
[ 0.181602] pci 0000:00:15.1: BAR 0 [mem 0xdc332000-0xdc332fff 64bit]
[ 0.181887] pci 0000:00:16.0: [8086:9d3a] type 00 class 0x078000 conventional PCI endpoint
[ 0.181900] pci 0000:00:16.0: BAR 0 [mem 0xdc331000-0xdc331fff 64bit]
[ 0.181942] pci 0000:00:16.0: PME# supported from D3hot
[ 0.182232] pci 0000:00:1c.0: [8086:9d10] type 01 class 0x060400 PCIe Root Port
[ 0.182248] pci 0000:00:1c.0: PCI bridge to [bus 01-39]
[ 0.182254] pci 0000:00:1c.0: bridge window [mem 0xc4000000-0xda0fffff]
[ 0.182260] pci 0000:00:1c.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref]
[ 0.182301] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.182679] pci 0000:00:1c.4: [8086:9d14] type 01 class 0x060400 PCIe Root Port
[ 0.182700] pci 0000:00:1c.4: PCI bridge to [bus 3a]
[ 0.182705] pci 0000:00:1c.4: bridge window [mem 0xdc000000-0xdc1fffff]
[ 0.182761] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.183163] pci 0000:00:1d.0: [8086:9d18] type 01 class 0x060400 PCIe Root Port
[ 0.183180] pci 0000:00:1d.0: PCI bridge to [bus 3b]
[ 0.183183] pci 0000:00:1d.0: bridge window [mem 0xdc200000-0xdc2fffff]
[ 0.183231] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.183629] pci 0000:00:1f.0: [8086:9d58] type 00 class 0x060100 conventional PCI endpoint
[ 0.183909] pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000 conventional PCI endpoint
[ 0.183921] pci 0000:00:1f.2: BAR 0 [mem 0xdc32c000-0xdc32ffff]
[ 0.184118] pci 0000:00:1f.3: [8086:9d71] type 00 class 0x040380 conventional PCI endpoint
[ 0.184137] pci 0000:00:1f.3: BAR 0 [mem 0xdc328000-0xdc32bfff 64bit]
[ 0.184159] pci 0000:00:1f.3: BAR 4 [mem 0xdc300000-0xdc30ffff 64bit]
[ 0.184199] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[ 0.184733] pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500 conventional PCI endpoint
[ 0.184791] pci 0000:00:1f.4: BAR 0 [mem 0xdc330000-0xdc3300ff 64bit]
[ 0.184862] pci 0000:00:1f.4: BAR 4 [io 0xf040-0xf05f]
[ 0.185152] pci 0000:00:1c.0: PCI bridge to [bus 01-39]
[ 0.185479] pci 0000:3a:00.0: [168c:003e] type 00 class 0x028000 PCIe Endpoint
[ 0.185693] pci 0000:3a:00.0: BAR 0 [mem 0xdc000000-0xdc1fffff 64bit]
[ 0.186891] pci 0000:3a:00.0: PME# supported from D0 D3hot D3cold
[ 0.188555] pci 0000:00:1c.4: PCI bridge to [bus 3a]
[ 0.188636] pci 0000:3b:00.0: [1c5c:1284] type 00 class 0x010802 PCIe Endpoint
[ 0.188655] pci 0000:3b:00.0: BAR 0 [mem 0xdc200000-0xdc203fff 64bit]
[ 0.188764] pci 0000:3b:00.0: PME# supported from D0 D1 D3hot
[ 0.189086] pci 0000:00:1d.0: PCI bridge to [bus 3b]
[ 0.192328] ACPI: PCI: Interrupt link LNKA configured for IRQ 11
[ 0.192374] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[ 0.192418] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
[ 0.192461] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
[ 0.192504] ACPI: PCI: Interrupt link LNKE configured for IRQ 11
[ 0.192547] ACPI: PCI: Interrupt link LNKF configured for IRQ 11
[ 0.192590] ACPI: PCI: Interrupt link LNKG configured for IRQ 11
[ 0.192632] ACPI: PCI: Interrupt link LNKH configured for IRQ 11
[ 0.202892] ACPI: EC: interrupt unblocked
[ 0.202893] ACPI: EC: event unblocked
[ 0.202899] ACPI: EC: EC_CMD/EC_SC=0x934, EC_DATA=0x930
[ 0.202900] ACPI: EC: GPE=0x14
[ 0.202901] ACPI: \_SB_.PCI0.LPCB.ECDV: Boot DSDT EC initialization complete
[ 0.202903] ACPI: \_SB_.PCI0.LPCB.ECDV: EC: Used to handle transactions and events
[ 0.203722] iommu: Default domain type: Translated
[ 0.203722] iommu: DMA domain TLB invalidation policy: lazy mode
[ 0.203840] pps_core: LinuxPPS API ver. 1 registered
[ 0.203841] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti at linux.it>
[ 0.203846] PTP clock support registered
[ 0.203859] EDAC MC: Ver: 3.0.0
[ 0.204140] efivars: Registered efivars operations
[ 0.204140] NetLabel: Initializing
[ 0.204140] NetLabel: domain hash size = 128
[ 0.204140] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.204140] NetLabel: unlabeled traffic allowed by default
[ 0.204140] PCI: Using ACPI for IRQ routing
[ 0.231251] PCI: pci_cache_line_size set to 64 bytes
[ 0.231630] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[ 0.231632] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[ 0.231632] e820: reserve RAM buffer [mem 0x51a78018-0x53ffffff]
[ 0.231634] e820: reserve RAM buffer [mem 0x556ab000-0x57ffffff]
[ 0.231635] e820: reserve RAM buffer [mem 0x62260000-0x63ffffff]
[ 0.231636] e820: reserve RAM buffer [mem 0x64df4000-0x67ffffff]
[ 0.231637] e820: reserve RAM buffer [mem 0x78600000-0x7bffffff]
[ 0.231637] e820: reserve RAM buffer [mem 0x481800000-0x483ffffff]
[ 0.231666] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.231666] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.231666] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.231666] vgaarb: loaded
[ 0.231731] clocksource: Switched to clocksource tsc-early
[ 0.231834] VFS: Disk quotas dquot_6.6.0
[ 0.231842] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.231923] AppArmor: AppArmor Filesystem Enabled
[ 0.231933] pnp: PnP ACPI init
[ 0.232143] system 00:00: [io 0x0680-0x069f] has been reserved
[ 0.232145] system 00:00: [io 0xffff] has been reserved
[ 0.232147] system 00:00: [io 0xffff] has been reserved
[ 0.232148] system 00:00: [io 0xffff] has been reserved
[ 0.232149] system 00:00: [io 0x1800-0x18fe] has been reserved
[ 0.232150] system 00:00: [io 0x164e-0x164f] has been reserved
[ 0.232265] system 00:02: [io 0x1854-0x1857] has been reserved
[ 0.232601] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.232603] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.232604] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.232606] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.232607] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.232608] system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.232610] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.232611] system 00:05: [mem 0xff000000-0xffffffff] has been reserved
[ 0.232613] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.232614] system 00:05: [mem 0xdffe0000-0xdfffffff] has been reserved
[ 0.232647] system 00:06: [mem 0xfd000000-0xfdabffff] has been reserved
[ 0.232649] system 00:06: [mem 0xfdad0000-0xfdadffff] has been reserved
[ 0.232651] system 00:06: [mem 0xfdb00000-0xfdffffff] has been reserved
[ 0.232652] system 00:06: [mem 0xfe000000-0xfe01ffff] could not be reserved
[ 0.232653] system 00:06: [mem 0xfe036000-0xfe03bfff] has been reserved
[ 0.232655] system 00:06: [mem 0xfe03d000-0xfe3fffff] has been reserved
[ 0.232656] system 00:06: [mem 0xfe410000-0xfe7fffff] has been reserved
[ 0.232899] system 00:07: [io 0xff00-0xfffe] has been reserved
[ 0.233822] system 00:08: [mem 0xfe029000-0xfe029fff] has been reserved
[ 0.233824] system 00:08: [mem 0xfe028000-0xfe028fff] has been reserved
[ 0.237280] pnp: PnP ACPI: found 9 devices
[ 0.242624] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.242670] NET: Registered PF_INET protocol family
[ 0.242787] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.253922] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
[ 0.253942] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.253997] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.254198] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[ 0.254400] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.254467] MPTCP token hash table entries: 16384 (order: 6, 393216 bytes, linear)
[ 0.254535] UDP hash table entries: 8192 (order: 7, 524288 bytes, linear)
[ 0.254603] UDP-Lite hash table entries: 8192 (order: 7, 524288 bytes, linear)
[ 0.254686] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.254691] NET: Registered PF_XDP protocol family
[ 0.254700] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01-39] add_size 1000
[ 0.254710] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]: assigned
[ 0.254713] pci 0000:00:1c.0: PCI bridge to [bus 01-39]
[ 0.254715] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.254719] pci 0000:00:1c.0: bridge window [mem 0xc4000000-0xda0fffff]
[ 0.254721] pci 0000:00:1c.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref]
[ 0.254725] pci 0000:00:1c.4: PCI bridge to [bus 3a]
[ 0.254728] pci 0000:00:1c.4: bridge window [mem 0xdc000000-0xdc1fffff]
[ 0.254734] pci 0000:00:1d.0: PCI bridge to [bus 3b]
[ 0.254736] pci 0000:00:1d.0: bridge window [mem 0xdc200000-0xdc2fffff]
[ 0.254741] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.254743] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.254744] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000dffff window]
[ 0.254745] pci_bus 0000:00: resource 7 [mem 0x7c800000-0xdfffffff window]
[ 0.254746] pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]
[ 0.254748] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
[ 0.254749] pci_bus 0000:01: resource 1 [mem 0xc4000000-0xda0fffff]
[ 0.254750] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xc1ffffff 64bit pref]
[ 0.254751] pci_bus 0000:3a: resource 1 [mem 0xdc000000-0xdc1fffff]
[ 0.254752] pci_bus 0000:3b: resource 1 [mem 0xdc200000-0xdc2fffff]
[ 0.255337] PCI: CLS 0 bytes, default 64
[ 0.255381] pci 0000:00:1f.1: [8086:9d20] type 00 class 0x058000 conventional PCI endpoint
[ 0.255440] pci 0000:00:1f.1: BAR 0 [mem 0xfd000000-0xfdffffff 64bit]
[ 0.255669] DMAR: ACPI device "device:79" under DMAR at fed91000 as 00:15.0
[ 0.255672] DMAR: ACPI device "device:7a" under DMAR at fed91000 as 00:15.1
[ 0.255681] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.255682] software IO TLB: mapped [mem 0x000000005e260000-0x0000000062260000] (64MB)
[ 0.255719] Unpacking initramfs...
[ 0.255735] sgx: EPC section 0x70200000-0x75f7ffff
[ 0.257090] Initialise system trusted keyrings
[ 0.257114] Key type blacklist registered
[ 0.257198] workingset: timestamp_bits=36 max_order=22 bucket_order=0
[ 0.257221] zbud: loaded
[ 0.257368] fuse: init (API version 7.41)
[ 0.257504] Key type asymmetric registered
[ 0.257506] Asymmetric key parser 'x509' registered
[ 0.275710] Freeing initrd memory: 11308K
[ 0.278691] alg: self-tests disabled
[ 0.278755] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 0.278808] io scheduler mq-deadline registered
[ 0.282017] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.282590] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 0.284718] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.284721] ACPI: thermal: Thermal Zone [THM] (25 C)
[ 0.284870] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.285473] hpet_acpi_add: no address or irqs in _CRS
[ 0.297018] tpm_tis MSFT0101:00: 2.0 TPM (device-id 0xFE, rev-id 4)
[ 0.332775] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.333038] i8042: Warning: Keylock active
[ 0.335258] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.335263] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.335407] mousedev: PS/2 mouse device common for all mice
[ 0.335421] rtc_cmos 00:01: RTC can wake from S4
[ 0.336114] rtc_cmos 00:01: registered as rtc0
[ 0.336268] rtc_cmos 00:01: setting system clock to 2024-12-07T06:47:06 UTC (1733554026)
[ 0.336289] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram
[ 0.336408] intel_pstate: Intel P-state driver initializing
[ 0.336551] intel_pstate: HWP enabled
[ 0.336762] efifb: probing for efifb
[ 0.336772] efifb: framebuffer at 0x90000000, using 22500k, total 22500k
[ 0.336773] efifb: mode is 3200x1800x32, linelength=12800, pages=1
[ 0.336774] efifb: scrolling: redraw
[ 0.336775] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.336857] Console: switching to colour frame buffer device 200x56
[ 0.336997] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.340666] fb0: EFI VGA frame buffer device
[ 0.340790] NET: Registered PF_INET6 protocol family
[ 0.344608] Segment Routing with IPv6
[ 0.344622] In-situ OAM (IOAM) with IPv6
[ 0.344646] mip6: Mobile IPv6
[ 0.344650] NET: Registered PF_PACKET protocol family
[ 0.344673] mpls_gso: MPLS GSO support
[ 0.344840] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.344866] microcode: Current revision: 0x000000f6
[ 0.344867] microcode: Updated early from: 0x000000f0
[ 0.344923] IPI shorthand broadcast: enabled
[ 0.345812] sched_clock: Marking stable (339072794, 5839356)->(354582985, -9670835)
[ 0.345919] registered taskstats version 1
[ 0.345982] Loading compiled-in X.509 certificates
[ 0.347301] Demotion targets for Node 0: null
[ 0.347327] Key type .fscrypt registered
[ 0.347328] Key type fscrypt-provisioning registered
[ 0.351903] cryptd: max_cpu_qlen set to 1000
[ 0.352586] AES CTR mode by8 optimization enabled
[ 0.361376] Key type encrypted registered
[ 0.361380] AppArmor: AppArmor sha256 policy hashing enabled
[ 0.361773] RAS: Correctable Errors collector initialized.
[ 0.370304] clk: Disabling unused clocks
[ 0.371119] Freeing unused decrypted memory: 2036K
[ 0.371464] Freeing unused kernel image (initmem) memory: 2880K
[ 0.371479] Write protecting the kernel read-only data: 24576k
[ 0.371639] Freeing unused kernel image (rodata/data gap) memory: 24K
[ 0.382266] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.382271] Run /init as init process
[ 0.382272] with arguments:
[ 0.382274] /init
[ 0.382274] with environment:
[ 0.382275] HOME=/
[ 0.382276] TERM=linux
[ 0.382276] BOOT_IMAGE=/vmlinuz-6.13.0-rc1-00316-gb5f217084ab3
[ 0.460752] nvme nvme0: pci function 0000:3b:00.0
[ 0.480033] nvme nvme0: 4/0/0 default/read/poll queues
[ 0.487311] nvme0n1: p1 p2 p3 p4
[ 0.531123] device-mapper: uevent: version 1.0.3
[ 0.531268] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel at lists.linux.dev
[ 1.282169] tsc: Refined TSC clocksource calibration: 2904.008 MHz
[ 1.282191] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x29dc0d988f1, max_idle_ns: 440795328788 ns
[ 1.282253] clocksource: Switched to clocksource tsc
[ 7.923973] PM: Image not found (code -22)
[ 7.989258] EXT4-fs (dm-0): mounted filesystem 32e29882-d94d-4a92-9ee4-4d03002bfa29 ro with ordered data mode. Quota mode: none.
[ 8.127712] systemd[1]: Inserted module 'autofs4'
[ 8.169554] systemd[1]: systemd 257~rc3-1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +BTF -XKBCOMMON -UTMP +SYSVINIT +LIBARCHIVE)
[ 8.169572] systemd[1]: Detected architecture x86-64.
[ 8.172757] systemd[1]: Hostname set to <abreu>.
[ 8.450994] systemd[1]: bpf-restrict-fs: LSM BPF program attached
[ 8.487211] systemd-sysv-generator[372]: SysV service '/etc/init.d/xl2tpd' lacks a native systemd unit file, automatically generating a unit file for compatibility.
[ 8.487216] systemd-sysv-generator[372]: Please update package to include a native systemd unit file.
[ 8.487218] systemd-sysv-generator[372]: ! This compatibility logic is deprecated, expect removal soon. !
[ 8.600174] systemd[1]: Queued start job for default target graphical.target.
[ 8.652322] systemd[1]: Created slice system-getty.slice - Slice /system/getty.
[ 8.653212] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe.
[ 8.653976] systemd[1]: Created slice system-systemd\x2dcryptsetup.slice - Encrypted Volume Units Service Slice.
[ 8.654719] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck.
[ 8.655196] systemd[1]: Created slice user.slice - User and Session Slice.
[ 8.655337] systemd[1]: Started systemd-ask-password-console.path - Dispatch Password Requests to Console Directory Watch.
[ 8.655433] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch.
[ 8.655791] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point.
[ 8.655851] systemd[1]: Expecting device dev-disk-by\x2ddiskseq-1\x2dpart4.device - /dev/disk/by-diskseq/1-part4...
[ 8.655867] systemd[1]: Expecting device dev-disk-by\x2duuid-2d23fd4c\x2d5d03\x2d4e1a\x2d8a42\x2d0e859d1f00d8.device - /dev/disk/by-uuid/2d23fd4c-5d03-4e1a-8a42-0e859d1f00d8...
[ 8.655879] systemd[1]: Expecting device dev-disk-by\x2duuid-61be8f50\x2d69c5\x2d49a5\x2dbcad\x2d3f4521e9c7b5.device - /dev/disk/by-uuid/61be8f50-69c5-49a5-bcad-3f4521e9c7b5...
[ 8.655897] systemd[1]: Expecting device dev-disk-by\x2duuid-96BD\x2d5653.device - /dev/disk/by-uuid/96BD-5653...
[ 8.655952] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes.
[ 8.656020] systemd[1]: Reached target nss-user-lookup.target - User and Group Name Lookups.
[ 8.656052] systemd[1]: Reached target paths.target - Path Units.
[ 8.656099] systemd[1]: Reached target remote-fs.target - Remote File Systems.
[ 8.656128] systemd[1]: Reached target slices.target - Slice Units.
[ 8.656208] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes.
[ 8.660255] systemd[1]: Listening on systemd-coredump.socket - Process Core Dump Socket.
[ 8.662906] systemd[1]: Listening on systemd-creds.socket - Credential Encryption/Decryption.
[ 8.663180] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe.
[ 8.663447] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log).
[ 8.663744] systemd[1]: Listening on systemd-journald.socket - Journal Sockets.
[ 8.663898] systemd[1]: systemd-pcrextend.socket - TPM PCR Measurements was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[ 8.663957] systemd[1]: systemd-pcrlock.socket - Make TPM PCR Policy was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[ 8.664188] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket.
[ 8.664361] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket.
[ 8.667351] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System...
[ 8.669502] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System...
[ 8.672702] systemd[1]: Mounting run-lock.mount - Legacy Locks Directory /run/lock...
[ 8.678106] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System...
[ 8.682104] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System...
[ 8.690111] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes...
[ 8.692009] systemd[1]: Starting modprobe at configfs.service - Load Kernel Module configfs...
[ 8.700824] systemd[1]: Starting modprobe at drm.service - Load Kernel Module drm...
[ 8.702256] systemd[1]: Starting modprobe at efi_pstore.service - Load Kernel Module efi_pstore...
[ 8.706384] systemd[1]: Starting modprobe at fuse.service - Load Kernel Module fuse...
[ 8.706506] systemd[1]: systemd-fsck-root.service - File System Check on Root Device was skipped because of an unmet condition check (ConditionPathExists=!/run/initramfs/fsck-root).
[ 8.706581] systemd[1]: systemd-hibernate-clear.service - Clear Stale Hibernate Storage Info was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67).
[ 8.708784] systemd[1]: Starting systemd-journald.service - Journal Service...
[ 8.712711] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules...
[ 8.712753] systemd[1]: systemd-pcrmachine.service - TPM PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[ 8.713226] pstore: Using crash dump compression: deflate
[ 8.717354] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems...
[ 8.717411] systemd[1]: systemd-tpm2-setup-early.service - Early TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[ 8.718396] systemd[1]: Starting systemd-udev-load-credentials.service - Load udev Rules from Credentials...
[ 8.721041] pstore: Registered efi_pstore as persistent store backend
[ 8.722034] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices...
[ 8.724100] systemd[1]: Mounted dev-hugepages.mount - Huge Pages File System.
[ 8.724208] systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System.
[ 8.724296] systemd[1]: Mounted run-lock.mount - Legacy Locks Directory /run/lock.
[ 8.724385] systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System.
[ 8.724472] systemd[1]: Mounted sys-kernel-tracing.mount - Kernel Trace File System.
[ 8.725968] systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes.
[ 8.726311] systemd[1]: modprobe at configfs.service: Deactivated successfully.
[ 8.730042] systemd[1]: Finished modprobe at configfs.service - Load Kernel Module configfs.
[ 8.731264] systemd[1]: modprobe at fuse.service: Deactivated successfully.
[ 8.732058] systemd[1]: Finished modprobe at fuse.service - Load Kernel Module fuse.
[ 8.735777] systemd[1]: Mounting sys-fs-fuse-connections.mount - FUSE Control File System...
[ 8.742719] systemd[1]: Mounting sys-kernel-config.mount - Kernel Configuration File System...
[ 8.744834] ACPI: bus type drm_connector registered
[ 8.750852] systemd[1]: Starting systemd-tmpfiles-setup-dev-early.service - Create Static Device Nodes in /dev gracefully...
[ 8.755052] systemd[1]: modprobe at drm.service: Deactivated successfully.
[ 8.755320] systemd[1]: Finished modprobe at drm.service - Load Kernel Module drm.
[ 8.755698] systemd[1]: modprobe at efi_pstore.service: Deactivated successfully.
[ 8.755924] systemd[1]: Finished modprobe at efi_pstore.service - Load Kernel Module efi_pstore.
[ 8.757959] systemd[1]: Finished systemd-udev-load-credentials.service - Load udev Rules from Credentials.
[ 8.759298] systemd[1]: Mounted sys-fs-fuse-connections.mount - FUSE Control File System.
[ 8.759417] systemd[1]: Mounted sys-kernel-config.mount - Kernel Configuration File System.
[ 8.764315] lp: driver loaded but no devices found
[ 8.767569] ppdev: user-space parallel port driver
[ 8.771139] systemd-journald[386]: Collecting audit messages is disabled.
[ 8.771607] EXT4-fs (dm-0): re-mounted 32e29882-d94d-4a92-9ee4-4d03002bfa29 r/w. Quota mode: none.
[ 8.772606] systemd[1]: Finished systemd-remount-fs.service - Remount Root and Kernel File Systems.
[ 8.772986] systemd[1]: systemd-hwdb-update.service - Rebuild Hardware Database was skipped because of an unmet condition check (ConditionNeedsUpdate=/etc).
[ 8.773041] systemd[1]: systemd-pstore.service - Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore).
[ 8.774674] systemd[1]: Starting systemd-random-seed.service - Load/Save OS Random Seed...
[ 8.774733] systemd[1]: systemd-tpm2-setup.service - TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[ 8.779807] systemd[1]: Finished systemd-modules-load.service - Load Kernel Modules.
[ 8.780737] systemd[1]: Starting systemd-sysctl.service - Apply Kernel Variables...
[ 8.786677] systemd[1]: Finished systemd-tmpfiles-setup-dev-early.service - Create Static Device Nodes in /dev gracefully.
[ 8.786846] systemd[1]: systemd-sysusers.service - Create System Users was skipped because no trigger condition checks were met.
[ 8.788214] systemd[1]: Starting systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev...
[ 8.796177] systemd[1]: Finished systemd-random-seed.service - Load/Save OS Random Seed.
[ 8.798417] systemd[1]: Finished systemd-sysctl.service - Apply Kernel Variables.
[ 8.802526] systemd[1]: Started systemd-journald.service - Journal Service.
[ 8.821771] systemd-journald[386]: Received client request to flush runtime journal.
[ 8.928744] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input12
[ 8.937825] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
[ 8.939297] ACPI: AC: AC Adapter [AC] (off-line)
[ 8.942031] ACPI: button: Lid Switch [LID0]
[ 8.942074] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input13
[ 8.942201] ACPI: button: Power Button [PBTN]
[ 8.942247] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input14
[ 8.942282] idma64 idma64.0: Found Intel integrated DMA 64-bit
[ 8.942316] ACPI: button: Sleep Button [SBTN]
[ 8.942525] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input15
[ 8.942811] ACPI: button: Power Button [PWRF]
[ 8.942888] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[ 8.944652] ACPI: bus type USB registered
[ 8.944678] usbcore: registered new interface driver usbfs
[ 8.944686] usbcore: registered new interface driver hub
[ 8.944695] usbcore: registered new device driver usb
[ 8.972677] wmi_bus wmi_bus-PNP0C14:01: [Firmware Bug]: WQBC data block query control method not found
[ 8.975934] Consider using thermal netlink events interface
[ 8.991530] input: Intel Virtual Buttons as /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/INT33D6:00/input/input16
[ 9.020223] ACPI: battery: Slot [BAT0] (battery present)
[ 9.058414] Adding 8387904k swap on /dev/nvme0n1p4. Priority:-2 extents:1 across:8387904k SS
[ 9.072950] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 9.074595] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 9.076041] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000081109810
[ 9.076508] input: Intel HID events as /devices/platform/INT33D5:00/input/input18
[ 9.078935] intel_pmc_core INT33A1:00: initialized
[ 9.080794] intel-hid INT33D5:00: platform supports 5 button array
[ 9.082189] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 9.082197] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 9.082210] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[ 9.082402] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.13
[ 9.082407] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 9.082410] usb usb1: Product: xHCI Host Controller
[ 9.082412] usb usb1: Manufacturer: Linux 6.13.0-rc1-00316-gb5f217084ab3 xhci-hcd
[ 9.082415] usb usb1: SerialNumber: 0000:00:14.0
[ 9.084987] input: Intel HID 5 button array as /devices/platform/INT33D5:00/input/input19
[ 9.090522] hub 1-0:1.0: USB hub found
[ 9.090645] hub 1-0:1.0: 12 ports detected
[ 9.097576] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002)
[ 9.103234] idma64 idma64.1: Found Intel integrated DMA 64-bit
[ 9.107829] proc_thermal 0000:00:04.0: enabling device (0000 -> 0002)
[ 9.121475] intel_rapl_common: Found RAPL domain package
[ 9.121480] intel_rapl_common: Found RAPL domain dram
[ 9.122309] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[ 9.150819] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.13
[ 9.150831] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 9.150837] usb usb2: Product: xHCI Host Controller
[ 9.150841] usb usb2: Manufacturer: Linux 6.13.0-rc1-00316-gb5f217084ab3 xhci-hcd
[ 9.150845] usb usb2: SerialNumber: 0000:00:14.0
[ 9.151881] hub 2-0:1.0: USB hub found
[ 9.151906] hub 2-0:1.0: 6 ports detected
[ 9.369848] usb 1-3: new full-speed USB device number 2 using xhci_hcd
[ 9.463458] Setting dangerous option enable_guc - tainting kernel
[ 9.463465] Setting dangerous option enable_fbc - tainting kernel
[ 9.463907] hid: raw HID events driver (C) Jiri Kosina
[ 9.464189] stackdepot: allocating hash table of 1048576 entries via kvcalloc
[ 9.469415] input: PC Speaker as /devices/platform/pcspkr/input/input20
[ 9.470652] i915 0000:00:02.0: [drm] Found kabylake/ult (device ID 5916) display version 9.00 stepping B0
[ 9.471367] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[ 9.471394] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[ 9.471592] Console: switching to colour dummy device 80x25
[ 9.471637] i915 0000:00:02.0: vgaarb: deactivate vga console
[ 9.522107] i915 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 9.525010] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)
[ 9.531025] usb 1-3: New USB device found, idVendor=0cf3, idProduct=e300, bcdDevice= 0.01
[ 9.531029] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 9.541402] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 9.545136] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 9.545271] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
[ 9.547423] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid
[ 9.559835] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[ 9.559841] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 9.559842] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 9.559843] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 9.559844] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 9.559845] RAPL PMU: hw unit of domain psys 2^-14 Joules
[ 9.573705] intel_rapl_common: Found RAPL domain package
[ 9.573709] intel_rapl_common: Found RAPL domain core
[ 9.573710] intel_rapl_common: Found RAPL domain uncore
[ 9.573711] intel_rapl_common: Found RAPL domain dram
[ 9.573712] intel_rapl_common: Found RAPL domain psys
[ 9.594108] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1
[ 9.594124] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0
[ 9.623777] i915 0000:00:02.0: [drm] GT0: HuC: authenticated for all workloads
[ 9.623784] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled
[ 9.623787] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled
[ 9.637932] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])
[ 9.652381] [drm] Initialized i915 1.6.0 for 0000:00:02.0 on minor 0
[ 9.654000] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 9.654657] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input21
[ 9.658840] iTCO_vendor_support: vendor-support=0
[ 9.686013] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 9.689567] fbcon: i915drmfb (fb0) is primary device
[ 9.689859] usb 1-4: new full-speed USB device number 3 using xhci_hcd
[ 9.702169] Console: switching to colour frame buffer device 200x56
[ 9.721366] input: DLL075B:01 06CB:76AF Mouse as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-1/i2c-DLL075B:01/0018:06CB:76AF.0001/input/input22
[ 9.721456] input: DLL075B:01 06CB:76AF Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-1/i2c-DLL075B:01/0018:06CB:76AF.0001/input/input23
[ 9.722649] iTCO_wdt iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400)
[ 9.723273] hid-generic 0018:06CB:76AF.0001: input,hidraw0: I2C HID v1.00 Mouse [DLL075B:01 06CB:76AF] on i2c-DLL075B:01
[ 9.733122] iTCO_wdt iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 9.741231] input: Dell WMI hotkeys as /devices/platform/PNP0C14:01/wmi_bus/wmi_bus-PNP0C14:01/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input25
[ 9.749780] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
[ 9.768499] snd_hda_codec_realtek hdaudioC0D0: ALC3246: picked fixup (pin match)
[ 9.782397] ath10k_pci 0000:3a:00.0: enabling device (0000 -> 0002)
[ 9.788145] ath10k_pci 0000:3a:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[ 9.798832] EXT4-fs (nvme0n1p2): mounted filesystem 2d23fd4c-5d03-4e1a-8a42-0e859d1f00d8 r/w with ordered data mode. Quota mode: none.
[ 9.806281] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC3246: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 9.806288] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 9.806291] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 9.806294] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 9.806296] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 9.806297] snd_hda_codec_realtek hdaudioC0D0: Headset Mic=0x19
[ 9.806300] snd_hda_codec_realtek hdaudioC0D0: Headphone Mic=0x1a
[ 9.806302] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
[ 9.835938] usb 1-4: New USB device found, idVendor=04f3, idProduct=2234, bcdDevice=11.11
[ 9.835943] usb 1-4: New USB device strings: Mfr=4, Product=14, SerialNumber=0
[ 9.835945] usb 1-4: Product: Touchscreen
[ 9.835946] usb 1-4: Manufacturer: ELAN
[ 9.881970] ACPI: battery: new extension: Dell Primary Battery Extension
[ 9.891006] input: DLL075B:01 06CB:76AF Mouse as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-1/i2c-DLL075B:01/0018:06CB:76AF.0001/input/input27
[ 9.891086] input: DLL075B:01 06CB:76AF Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-1/i2c-DLL075B:01/0018:06CB:76AF.0001/input/input28
[ 9.891159] hid-multitouch 0018:06CB:76AF.0001: input,hidraw0: I2C HID v1.00 Mouse [DLL075B:01 06CB:76AF] on i2c-DLL075B:01
[ 9.957868] usb 1-5: new high-speed USB device number 4 using xhci_hcd
[ 9.964259] audit: type=1400 audit(1733554036.121:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=559 comm="apparmor_parser"
[ 9.964798] audit: type=1400 audit(1733554036.121:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=560 comm="apparmor_parser"
[ 9.964802] audit: type=1400 audit(1733554036.121:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=560 comm="apparmor_parser"
[ 9.965551] audit: type=1400 audit(1733554036.121:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=562 comm="apparmor_parser"
[ 9.965555] audit: type=1400 audit(1733554036.121:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=562 comm="apparmor_parser"
[ 9.965557] audit: type=1400 audit(1733554036.121:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=562 comm="apparmor_parser"
[ 9.971305] audit: type=1400 audit(1733554036.129:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="tcpdump" pid=566 comm="apparmor_parser"
[ 9.971519] audit: type=1400 audit(1733554036.129:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/ipsec/charon" pid=568 comm="apparmor_parser"
[ 9.972977] audit: type=1400 audit(1733554036.129:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="msmtp" pid=565 comm="apparmor_parser"
[ 9.972982] audit: type=1400 audit(1733554036.129:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="msmtp//helpers" pid=565 comm="apparmor_parser"
[ 10.030164] ath10k_pci 0000:3a:00.0: qca6174 hw3.2 target 0x05030000 chip_id 0x00340aff sub 1a56:1535
[ 10.030172] ath10k_pci 0000:3a:00.0: kconfig debug 0 debugfs 0 tracing 0 dfs 0 testmode 0
[ 10.030730] ath10k_pci 0000:3a:00.0: firmware ver WLAN.RM.4.4.1-00309- api 6 features wowlan,ignore-otp,mfp crc32 0793bcf2
[ 10.050142] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1f.3/sound/card0/input26
[ 10.050506] input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input30
[ 10.050578] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input31
[ 10.050628] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input32
[ 10.051662] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input33
[ 10.105764] ath10k_pci 0000:3a:00.0: board_file api 2 bmi_id N/A crc32 d2863f91
[ 10.166756] usb 1-5: New USB device found, idVendor=0c45, idProduct=670c, bcdDevice=56.26
[ 10.166762] usb 1-5: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[ 10.166765] usb 1-5: Product: Integrated_Webcam_HD
[ 10.166767] usb 1-5: Manufacturer: CN09GTFMLOG008C8B7FWA01
[ 10.200270] ath10k_pci 0000:3a:00.0: htt-ver 3.87 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1
[ 10.264548] mc: Linux media interface: v0.10
[ 10.281792] ath: EEPROM regdomain: 0x6c
[ 10.281796] ath: EEPROM indicates we should expect a direct regpair map
[ 10.281798] ath: Country alpha2 being used: 00
[ 10.281799] ath: Regpair used: 0x6c
[ 10.283218] nvme nvme0: using unchecked data buffer
[ 10.291064] ath10k_pci 0000:3a:00.0 wlp58s0: renamed from wlan0
[ 10.293809] input: ELAN Touchscreen as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:04F3:2234.0002/input/input34
[ 10.297994] input: ELAN Touchscreen UNKNOWN as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:04F3:2234.0002/input/input35
[ 10.298244] input: ELAN Touchscreen UNKNOWN as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:04F3:2234.0002/input/input36
[ 10.301969] hid-multitouch 0003:04F3:2234.0002: input,hiddev0,hidraw1: USB HID v1.10 Device [ELAN Touchscreen] on usb-0000:00:14.0-4/input0
[ 10.302019] usbcore: registered new interface driver usbhid
[ 10.302021] usbhid: USB HID core driver
[ 10.317127] Bluetooth: Core ver 2.22
[ 10.317157] NET: Registered PF_BLUETOOTH protocol family
[ 10.317159] Bluetooth: HCI device and connection manager initialized
[ 10.317557] Bluetooth: HCI socket layer initialized
[ 10.317560] Bluetooth: L2CAP socket layer initialized
[ 10.317565] Bluetooth: SCO socket layer initialized
[ 10.322214] videodev: Linux video capture interface: v2.00
[ 10.373241] usbcore: registered new interface driver btusb
[ 10.376282] usb 1-5: Found UVC 1.00 device Integrated_Webcam_HD (0c45:670c)
[ 10.377869] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin
[ 10.377875] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111
[ 10.740193] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin
[ 10.763631] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported.
[ 11.153822] usbcore: registered new interface driver uvcvideo
[ 11.318883] PPP generic driver version 2.4.2
[ 11.320304] NET: Registered PF_PPPOX protocol family
[ 11.333803] l2tp_core: L2TP core driver, V2.0
[ 11.334264] Initializing XFRM netlink socket
[ 11.339228] l2tp_netlink: L2TP netlink interface
[ 11.343393] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[ 11.355067] IPsec XFRM device driver
[ 13.810882] rfkill: input handler disabled
[ 16.292738] wlp58s0: authenticate with 88:71:b1:81:93:1b (local address=9c:b6:d0:d1:6a:b1)
[ 16.292743] wlp58s0: send auth to 88:71:b1:81:93:1b (try 1/3)
[ 16.294335] wlp58s0: authenticated
[ 16.297888] wlp58s0: associate with 88:71:b1:81:93:1b (try 1/3)
[ 16.330681] wlp58s0: RX AssocResp from 88:71:b1:81:93:1b (capab=0x1011 status=0 aid=1)
[ 16.333304] wlp58s0: associated
[ 16.366951] wlp58s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 88:71:b1:81:93:1b
[ 18.120352] rfkill: input handler enabled
[ 20.707757] rfkill: input handler disabled
[ 4102.251299] systemd-sysv-generator[6501]: SysV service '/etc/init.d/xl2tpd' lacks a native systemd unit file, automatically generating a unit file for compatibility.
[ 4102.251316] systemd-sysv-generator[6501]: Please update package to include a native systemd unit file.
[ 4102.251323] systemd-sysv-generator[6501]: ! This compatibility logic is deprecated, expect removal soon. !
[11448.783099] wlp58s0: deauthenticating from 88:71:b1:81:93:1b by local choice (Reason: 3=DEAUTH_LEAVING)
[11450.311148] PM: suspend entry (deep)
[11450.339251] Filesystems sync: 0.028 seconds
[11450.355874] Freezing user space processes
[11450.357613] Freezing user space processes completed (elapsed 0.001 seconds)
[11450.357625] OOM killer disabled.
[11450.357628] Freezing remaining freezable tasks
[11450.359162] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
[11450.359281] printk: Suspending console(s) (use no_console_suspend to debug)
[11450.963371] ACPI: EC: interrupt blocked
[11450.993606] ACPI: PM: Preparing to enter system sleep state S3
[11451.003719] ACPI: EC: event blocked
[11451.003724] ACPI: EC: EC stopped
[11451.003726] ACPI: PM: Saving platform NVS memory
[11451.006966] Disabling non-boot CPUs ...
[11451.008884] smpboot: CPU 3 is now offline
[11451.013031] smpboot: CPU 2 is now offline
[11451.018213] smpboot: CPU 1 is now offline
[11451.025609] ACPI: PM: Low-level resume complete
[11451.025652] ACPI: EC: EC started
[11451.025653] ACPI: PM: Restoring platform NVS memory
[11451.027603] Enabling non-boot CPUs ...
[11451.027627] smpboot: Booting Node 0 Processor 1 APIC 0x2
[11451.028297] CPU1 is up
[11451.028312] smpboot: Booting Node 0 Processor 2 APIC 0x1
[11451.029021] CPU2 is up
[11451.029038] smpboot: Booting Node 0 Processor 3 APIC 0x3
[11451.029760] CPU3 is up
[11451.032663] ACPI: PM: Waking up from system sleep state S3
[11451.086889] ACPI: EC: interrupt unblocked
[11451.103601] ACPI: EC: event unblocked
[11451.105879] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1
[11451.105890] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0
[11451.116200] nvme nvme0: 4/0/0 default/read/poll queues
[11451.132235] i915 0000:00:02.0: [drm] GT0: HuC: authenticated for all workloads
[11451.132240] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled
[11451.132242] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled
[11451.353825] usb 1-4: reset full-speed USB device number 3 using xhci_hcd
[11451.365622] atkbd serio0: Failed to deactivate keyboard on isa0060/serio0
[11451.532985] atkbd_receive_byte: 19 callbacks suppressed
[11451.532988] atkbd serio0: Spurious ACK on isa0060/serio0. Some program might be trying to access hardware directly.
[11451.613778] usb 1-5: reset high-speed USB device number 4 using xhci_hcd
[11451.869851] usb 1-3: reset full-speed USB device number 2 using xhci_hcd
[11452.008623] OOM killer enabled.
[11452.008625] Restarting tasks ... done.
[11452.010217] random: crng reseeded on system resumption
[11452.066441] PM: suspend exit
[11452.188029] warning: `atop' uses wireless extensions which will stop working for Wi-Fi 7 hardware; use nl80211
[11452.212926] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin
[11452.212931] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111
[11452.555767] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])
[11452.586222] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin
[11452.615376] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported.
[11457.693797] wlp58s0: authenticate with 88:71:b1:81:93:1b (local address=9c:b6:d0:d1:6a:b1)
[11457.693804] wlp58s0: send auth to 88:71:b1:81:93:1b (try 1/3)
[11457.695720] wlp58s0: authenticated
[11457.697541] wlp58s0: associate with 88:71:b1:81:93:1b (try 1/3)
[11457.736212] wlp58s0: RX AssocResp from 88:71:b1:81:93:1b (capab=0x1011 status=0 aid=2)
[11457.738680] wlp58s0: associated
[11457.773707] wlp58s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 88:71:b1:81:93:1b
[12853.826454] wlp58s0: deauthenticating from 88:71:b1:81:93:1b by local choice (Reason: 3=DEAUTH_LEAVING)
[12855.394040] PM: suspend entry (deep)
[12855.404547] Filesystems sync: 0.010 seconds
[12855.410188] Freezing user space processes
[12855.411865] Freezing user space processes completed (elapsed 0.001 seconds)
[12855.411870] OOM killer disabled.
[12855.411871] Freezing remaining freezable tasks
[12855.413249] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
[12855.413306] printk: Suspending console(s) (use no_console_suspend to debug)
[12856.026801] ACPI: EC: interrupt blocked
[12856.058238] ACPI: PM: Preparing to enter system sleep state S3
[12856.074879] ACPI: EC: event blocked
[12856.074884] ACPI: EC: EC stopped
[12856.074886] ACPI: PM: Saving platform NVS memory
[12856.078324] Disabling non-boot CPUs ...
[12856.080238] smpboot: CPU 3 is now offline
[12856.084364] smpboot: CPU 2 is now offline
[12856.086743] smpboot: CPU 1 is now offline
[12856.095313] ACPI: PM: Low-level resume complete
[12856.095357] ACPI: EC: EC started
[12856.095357] ACPI: PM: Restoring platform NVS memory
[12856.097308] Enabling non-boot CPUs ...
[12856.097332] smpboot: Booting Node 0 Processor 1 APIC 0x2
[12856.098003] CPU1 is up
[12856.098018] smpboot: Booting Node 0 Processor 2 APIC 0x1
[12856.098782] CPU2 is up
[12856.098797] smpboot: Booting Node 0 Processor 3 APIC 0x3
[12856.099444] CPU3 is up
[12856.102353] ACPI: PM: Waking up from system sleep state S3
[12856.133701] ACPI: EC: interrupt unblocked
[12856.152650] ACPI: EC: event unblocked
[12856.155473] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1
[12856.155482] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0
[12856.167846] nvme nvme0: 4/0/0 default/read/poll queues
[12856.180686] i915 0000:00:02.0: [drm] GT0: HuC: authenticated for all workloads
[12856.180691] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled
[12856.180695] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled
[12856.390201] atkbd serio0: Failed to deactivate keyboard on isa0060/serio0
[12856.402822] usb 1-4: reset full-speed USB device number 3 using xhci_hcd
[12856.658778] usb 1-5: reset high-speed USB device number 4 using xhci_hcd
[12856.914953] usb 1-3: reset full-speed USB device number 2 using xhci_hcd
[12857.058326] OOM killer enabled.
[12857.058333] Restarting tasks ... done.
[12857.059276] random: crng reseeded on system resumption
[12857.190515] PM: suspend exit
[12857.269225] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin
[12857.269241] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111
[12857.625327] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin
[12857.648103] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported.
[12857.684591] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])
[12920.061358] PM: suspend entry (deep)
[12920.073756] Filesystems sync: 0.012 seconds
[12920.078430] Freezing user space processes
[12920.079957] Freezing user space processes completed (elapsed 0.001 seconds)
[12920.079960] OOM killer disabled.
[12920.079961] Freezing remaining freezable tasks
[12920.081297] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
[12920.081350] printk: Suspending console(s) (use no_console_suspend to debug)
[12920.702493] ACPI: EC: interrupt blocked
[12920.733939] ACPI: PM: Preparing to enter system sleep state S3
[12920.744032] ACPI: EC: event blocked
[12920.744037] ACPI: EC: EC stopped
[12920.744038] ACPI: PM: Saving platform NVS memory
[12920.747488] Disabling non-boot CPUs ...
[12920.749414] smpboot: CPU 3 is now offline
[12920.753856] smpboot: CPU 2 is now offline
[12920.756168] smpboot: CPU 1 is now offline
[12920.763687] ACPI: PM: Low-level resume complete
[12920.763730] ACPI: EC: EC started
[12920.763730] ACPI: PM: Restoring platform NVS memory
[12920.765677] Enabling non-boot CPUs ...
[12920.765701] smpboot: Booting Node 0 Processor 1 APIC 0x2
[12920.766377] CPU1 is up
[12920.766393] smpboot: Booting Node 0 Processor 2 APIC 0x1
[12920.767103] CPU2 is up
[12920.767121] smpboot: Booting Node 0 Processor 3 APIC 0x3
[12920.767786] CPU3 is up
[12920.770681] ACPI: PM: Waking up from system sleep state S3
[12920.801756] ACPI: EC: interrupt unblocked
[12920.819998] ACPI: EC: event unblocked
[12920.822832] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1
[12920.822844] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0
[12920.832568] nvme nvme0: 4/0/0 default/read/poll queues
[12920.848436] i915 0000:00:02.0: [drm] GT0: HuC: authenticated for all workloads
[12920.848440] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled
[12920.848442] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled
[12921.061906] atkbd serio0: Failed to deactivate keyboard on isa0060/serio0
[12921.070128] usb 1-5: reset high-speed USB device number 4 using xhci_hcd
[12921.326146] usb 1-4: reset full-speed USB device number 3 using xhci_hcd
[12921.582131] usb 1-3: reset full-speed USB device number 2 using xhci_hcd
[12921.721545] OOM killer enabled.
[12921.721547] Restarting tasks ... done.
[12921.725887] random: crng reseeded on system resumption
[12921.839095] PM: suspend exit
[12921.923683] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin
[12921.923690] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111
[12922.279506] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin
[12922.302699] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])
[12922.305411] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported.
[12927.586360] wlp58s0: authenticate with 88:71:b1:81:93:1b (local address=9c:b6:d0:d1:6a:b1)
[12927.586383] wlp58s0: send auth to 88:71:b1:81:93:1b (try 1/3)
[12927.589144] wlp58s0: authenticated
[12927.593867] wlp58s0: associate with 88:71:b1:81:93:1b (try 1/3)
[12927.627305] wlp58s0: RX AssocResp from 88:71:b1:81:93:1b (capab=0x1011 status=0 aid=1)
[12927.630205] wlp58s0: associated
[12927.694147] wlp58s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 88:71:b1:81:93:1b
[12930.278831] pci 0000:01:00.0: [8086:1576] type 01 class 0x060400 PCIe Switch Upstream Port
[12930.278906] pci 0000:01:00.0: PCI bridge to [bus 02-39]
[12930.278930] pci 0000:01:00.0: bridge window [mem 0xc4000000-0xda0fffff]
[12930.278955] pci 0000:01:00.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref]
[12930.278983] pci 0000:01:00.0: enabling Extended Tags
[12930.279883] pci 0000:01:00.0: supports D1 D2
[12930.279894] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[12930.280032] pci 0000:01:00.0: 15.752 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x2 link at 0000:00:1c.0 (capable of 31.504 Gb/s with 8.0 GT/s PCIe x4 link)
[12930.369465] pci 0000:02:00.0: [8086:1576] type 01 class 0x060400 PCIe Switch Downstream Port
[12930.369557] pci 0000:02:00.0: PCI bridge to [bus 03]
[12930.369588] pci 0000:02:00.0: bridge window [mem 0xda000000-0xda0fffff]
[12930.369649] pci 0000:02:00.0: enabling Extended Tags
[12930.369912] pci 0000:02:00.0: supports D1 D2
[12930.369923] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[12930.370577] pci 0000:02:01.0: [8086:1576] type 01 class 0x060400 PCIe Switch Downstream Port
[12930.370646] pci 0000:02:01.0: PCI bridge to [bus 04-38]
[12930.370667] pci 0000:02:01.0: bridge window [mem 0xc4000000-0xd9efffff]
[12930.370691] pci 0000:02:01.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref]
[12930.370728] pci 0000:02:01.0: enabling Extended Tags
[12930.370950] pci 0000:02:01.0: supports D1 D2
[12930.370960] pci 0000:02:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[12930.371679] pci 0000:02:02.0: [8086:1576] type 01 class 0x060400 PCIe Switch Downstream Port
[12930.371758] pci 0000:02:02.0: PCI bridge to [bus 39]
[12930.371787] pci 0000:02:02.0: bridge window [mem 0xd9f00000-0xd9ffffff]
[12930.371848] pci 0000:02:02.0: enabling Extended Tags
[12930.372075] pci 0000:02:02.0: supports D1 D2
[12930.372085] pci 0000:02:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[12930.376843] pci 0000:01:00.0: PCI bridge to [bus 02-39]
[12930.377508] pci 0000:02:00.0: PCI bridge to [bus 03]
[12930.378091] pci 0000:02:01.0: PCI bridge to [bus 04-38]
[12930.378407] pci 0000:39:00.0: [8086:15b5] type 00 class 0x0c0330 PCIe Endpoint
[12930.378462] pci 0000:39:00.0: BAR 0 [mem 0xd9f00000-0xd9f0ffff]
[12930.378597] pci 0000:39:00.0: enabling Extended Tags
[12930.378847] pci 0000:39:00.0: supports D1 D2
[12930.378855] pci 0000:39:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[12930.379023] pci 0000:39:00.0: 8.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x4 link at 0000:02:02.0 (capable of 31.504 Gb/s with 8.0 GT/s PCIe x4 link)
[12930.385497] pci 0000:02:02.0: PCI bridge to [bus 39]
[12930.385605] pci_bus 0000:02: Allocating resources
[12930.385649] pci 0000:02:01.0: bridge window [io 0x1000-0x0fff] to [bus 04-38] add_size 1000
[12930.385668] pci 0000:02:02.0: bridge window [io 0x1000-0x0fff] to [bus 39] add_size 1000
[12930.385683] pci 0000:02:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 39] add_size 200000 add_align 100000
[12930.385702] pci 0000:01:00.0: bridge window [io 0x1000-0x0fff] to [bus 02-39] add_size 2000
[12930.385722] pci 0000:01:00.0: bridge window [io size 0x2000]: can't assign; no space
[12930.385732] pci 0000:01:00.0: bridge window [io size 0x2000]: failed to assign
[12930.385743] pci 0000:01:00.0: bridge window [io size 0x2000]: can't assign; no space
[12930.385752] pci 0000:01:00.0: bridge window [io size 0x2000]: failed to assign
[12930.385776] pci 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[12930.385829] pci 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[12930.385840] pci 0000:02:01.0: bridge window [io size 0x1000]: can't assign; no space
[12930.385849] pci 0000:02:01.0: bridge window [io size 0x1000]: failed to assign
[12930.385858] pci 0000:02:02.0: bridge window [io size 0x1000]: can't assign; no space
[12930.385866] pci 0000:02:02.0: bridge window [io size 0x1000]: failed to assign
[12930.385883] pci 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[12930.385893] pci 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[12930.385904] pci 0000:02:02.0: bridge window [io size 0x1000]: can't assign; no space
[12930.385913] pci 0000:02:02.0: bridge window [io size 0x1000]: failed to assign
[12930.385920] pci 0000:02:01.0: bridge window [io size 0x1000]: can't assign; no space
[12930.385928] pci 0000:02:01.0: bridge window [io size 0x1000]: failed to assign
[12930.385939] pci 0000:02:00.0: PCI bridge to [bus 03]
[12930.385955] pci 0000:02:00.0: bridge window [mem 0xda000000-0xda0fffff]
[12930.385982] pci 0000:02:01.0: PCI bridge to [bus 04-38]
[12930.385996] pci 0000:02:01.0: bridge window [mem 0xc4000000-0xd9efffff]
[12930.386010] pci 0000:02:01.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref]
[12930.386029] pci 0000:02:02.0: PCI bridge to [bus 39]
[12930.386043] pci 0000:02:02.0: bridge window [mem 0xd9f00000-0xd9ffffff]
[12930.386065] pci 0000:01:00.0: PCI bridge to [bus 02-39]
[12930.386080] pci 0000:01:00.0: bridge window [mem 0xc4000000-0xda0fffff]
[12930.386095] pci 0000:01:00.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref]
[12930.399244] xhci_hcd 0000:39:00.0: xHCI Host Controller
[12930.399297] xhci_hcd 0000:39:00.0: new USB bus registered, assigned bus number 3
[12930.400923] xhci_hcd 0000:39:00.0: hcc params 0x200077c1 hci version 0x110 quirks 0x0000000200009810
[12930.402897] xhci_hcd 0000:39:00.0: xHCI Host Controller
[12930.402931] xhci_hcd 0000:39:00.0: new USB bus registered, assigned bus number 4
[12930.402969] xhci_hcd 0000:39:00.0: Host supports USB 3.1 Enhanced SuperSpeed
[12930.403219] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.13
[12930.403246] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[12930.403266] usb usb3: Product: xHCI Host Controller
[12930.403275] usb usb3: Manufacturer: Linux 6.13.0-rc1-00316-gb5f217084ab3 xhci-hcd
[12930.403293] usb usb3: SerialNumber: 0000:39:00.0
[12930.405561] hub 3-0:1.0: USB hub found
[12930.405917] hub 3-0:1.0: 2 ports detected
[12930.413602] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.13
[12930.413626] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[12930.413637] usb usb4: Product: xHCI Host Controller
[12930.413646] usb usb4: Manufacturer: Linux 6.13.0-rc1-00316-gb5f217084ab3 xhci-hcd
[12930.413655] usb usb4: SerialNumber: 0000:39:00.0
[12930.414776] hub 4-0:1.0: USB hub found
[12930.414819] hub 4-0:1.0: 2 ports detected
[12930.418469] pci_bus 0000:02: Allocating resources
[12930.418523] pcieport 0000:02:01.0: bridge window [io 0x1000-0x0fff] to [bus 04-38] add_size 1000
[12930.418546] pcieport 0000:02:02.0: bridge window [io 0x1000-0x0fff] to [bus 39] add_size 1000
[12930.418559] pcieport 0000:02:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 39] add_size 200000 add_align 100000
[12930.418577] pcieport 0000:01:00.0: bridge window [io 0x1000-0x0fff] to [bus 02-39] add_size 2000
[12930.418595] pcieport 0000:01:00.0: bridge window [io size 0x2000]: can't assign; no space
[12930.418605] pcieport 0000:01:00.0: bridge window [io size 0x2000]: failed to assign
[12930.418616] pcieport 0000:01:00.0: bridge window [io size 0x2000]: can't assign; no space
[12930.418625] pcieport 0000:01:00.0: bridge window [io size 0x2000]: failed to assign
[12930.418647] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[12930.418657] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[12930.418668] pcieport 0000:02:01.0: bridge window [io size 0x1000]: can't assign; no space
[12930.418678] pcieport 0000:02:01.0: bridge window [io size 0x1000]: failed to assign
[12930.418687] pcieport 0000:02:02.0: bridge window [io size 0x1000]: can't assign; no space
[12930.418696] pcieport 0000:02:02.0: bridge window [io size 0x1000]: failed to assign
[12930.418713] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[12930.418723] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[12930.418734] pcieport 0000:02:02.0: bridge window [io size 0x1000]: can't assign; no space
[12930.418743] pcieport 0000:02:02.0: bridge window [io size 0x1000]: failed to assign
[12930.418752] pcieport 0000:02:01.0: bridge window [io size 0x1000]: can't assign; no space
[12930.418760] pcieport 0000:02:01.0: bridge window [io size 0x1000]: failed to assign
[12930.661840] usb 3-1: new high-speed USB device number 2 using xhci_hcd
[12930.803756] usb 3-1: New USB device found, idVendor=2109, idProduct=2817, bcdDevice= 5.e3
[12930.803785] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[12930.803798] usb 3-1: Product: USB2.0 Hub
[12930.803805] usb 3-1: Manufacturer: VIA Labs, Inc.
[12930.803813] usb 3-1: SerialNumber: 000000000
[12930.808453] hub 3-1:1.0: USB hub found
[12930.808611] hub 3-1:1.0: 5 ports detected
[12930.934228] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd
[12930.981634] usb 4-1: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 5.e3
[12930.981660] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[12930.981671] usb 4-1: Product: USB3.0 Hub
[12930.981679] usb 4-1: Manufacturer: VIA Labs, Inc.
[12930.981687] usb 4-1: SerialNumber: 000000000
[12930.985199] hub 4-1:1.0: USB hub found
[12930.985459] hub 4-1:1.0: 4 ports detected
[12931.533848] usb 3-1.1: new high-speed USB device number 3 using xhci_hcd
[12931.672400] usb 3-1.1: New USB device found, idVendor=2109, idProduct=2817, bcdDevice= 7.b4
[12931.672426] usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[12931.672442] usb 3-1.1: Product: USB2.0 Hub
[12931.672448] usb 3-1.1: Manufacturer: VIA Labs, Inc.
[12931.672461] usb 3-1.1: SerialNumber: 000000000
[12931.674648] hub 3-1.1:1.0: USB hub found
[12931.674863] hub 3-1.1:1.0: 4 ports detected
[12931.768457] usb 4-1.1: new SuperSpeed USB device number 3 using xhci_hcd
[12931.827842] usb 4-1.1: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 7.b4
[12931.827870] usb 4-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[12931.827887] usb 4-1.1: Product: USB3.0 Hub
[12931.827893] usb 4-1.1: Manufacturer: VIA Labs, Inc.
[12931.827906] usb 4-1.1: SerialNumber: 000000000
[12931.877858] hub 4-1.1:1.0: USB hub found
[12931.878203] hub 4-1.1:1.0: 4 ports detected
[12931.945831] usb 3-1.2: new high-speed USB device number 4 using xhci_hcd
[12932.103239] usb 3-1.2: New USB device found, idVendor=0bda, idProduct=5409, bcdDevice= 1.41
[12932.103267] usb 3-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[12932.103284] usb 3-1.2: Product: 4-Port USB 2.0 Hub
[12932.103289] usb 3-1.2: Manufacturer: Generic
[12932.107762] hub 3-1.2:1.0: USB hub found
[12932.109331] hub 3-1.2:1.0: 4 ports detected
[12932.162459] usb 4-1.2: new SuperSpeed USB device number 4 using xhci_hcd
[12932.193380] usb 4-1.2: New USB device found, idVendor=0bda, idProduct=0409, bcdDevice= 1.41
[12932.193402] usb 4-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[12932.193418] usb 4-1.2: Product: 4-Port USB 3.0 Hub
[12932.193424] usb 4-1.2: Manufacturer: Generic
[12932.203135] hub 4-1.2:1.0: USB hub found
[12932.204627] hub 4-1.2:1.0: 2 ports detected
[12932.257815] usb 3-1.5: new high-speed USB device number 5 using xhci_hcd
[12932.347411] usb 3-1.5: New USB device found, idVendor=2109, idProduct=8817, bcdDevice= 0.01
[12932.347434] usb 3-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[12932.347441] usb 3-1.5: Product: USB Billboard Device
[12932.347455] usb 3-1.5: Manufacturer: VIA Labs, Inc.
[12932.347461] usb 3-1.5: SerialNumber: 0000000000000001
[12932.417992] usb 4-1.4: new SuperSpeed USB device number 5 using xhci_hcd
[12932.436198] usb 4-1.4: New USB device found, idVendor=058f, idProduct=8468, bcdDevice= 1.00
[12932.436222] usb 4-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[12932.436229] usb 4-1.4: Product: Mass Storage Device
[12932.436244] usb 4-1.4: Manufacturer: Generic
[12932.436249] usb 4-1.4: SerialNumber: 058F84688461
[12932.505826] usb 3-1.1.3: new high-speed USB device number 6 using xhci_hcd
[12932.673235] SCSI subsystem initialized
[12932.681669] usb-storage 4-1.4:1.0: USB Mass Storage device detected
[12932.682365] scsi host0: usb-storage 4-1.4:1.0
[12932.683498] usbcore: registered new interface driver usb-storage
[12933.253802] usb 3-1.2.3: new low-speed USB device number 7 using xhci_hcd
[12933.365242] usb 3-1.2.3: New USB device found, idVendor=413c, idProduct=2113, bcdDevice= 1.08
[12933.365269] usb 3-1.2.3: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[12933.365285] usb 3-1.2.3: Product: Dell KB216 Wired Keyboard
[12933.377341] input: Dell KB216 Wired Keyboard as /devices/pci0000:00/0000:00:1c.0/0000:01:00.0/0000:02:02.0/0000:39:00.0/usb3/3-1/3-1.2/3-1.2.3/3-1.2.3:1.0/0003:413C:2113.0003/input/input41
[12933.429938] usb 4-1.1.3: new SuperSpeed USB device number 6 using xhci_hcd
[12933.446884] usb 4-1.1.3: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=30.00
[12933.446901] usb 4-1.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=6
[12933.446909] usb 4-1.1.3: Product: USB 10/100/1000 LAN
[12933.446915] usb 4-1.1.3: Manufacturer: Realtek
[12933.446920] usb 4-1.1.3: SerialNumber: 000001
[12933.499091] hid-generic 0003:413C:2113.0003: input,hidraw2: USB HID v1.11 Keyboard [Dell KB216 Wired Keyboard] on usb-0000:39:00.0-1.2.3/input0
[12933.507868] usbcore: registered new device driver r8152-cfgselector
[12933.508864] input: Dell KB216 Wired Keyboard System Control as /devices/pci0000:00/0000:00:1c.0/0000:01:00.0/0000:02:02.0/0000:39:00.0/usb3/3-1/3-1.2/3-1.2.3/3-1.2.3:1.1/0003:413C:2113.0004/input/input42
[12933.562336] input: Dell KB216 Wired Keyboard Consumer Control as /devices/pci0000:00/0000:00:1c.0/0000:01:00.0/0000:02:02.0/0000:39:00.0/usb3/3-1/3-1.2/3-1.2.3/3-1.2.3:1.1/0003:413C:2113.0004/input/input43
[12933.562917] hid-generic 0003:413C:2113.0004: input,hidraw3: USB HID v1.11 Device [Dell KB216 Wired Keyboard] on usb-0000:39:00.0-1.2.3/input1
[12933.586247] r8152-cfgselector 4-1.1.3: reset SuperSpeed USB device number 6 using xhci_hcd
[12933.646579] r8152 4-1.1.3:1.0 eth0: v1.12.13
[12933.646625] usbcore: registered new interface driver r8152
[12933.652583] usbcore: registered new interface driver cdc_ether
[12933.653402] usbcore: registered new interface driver r8153_ecm
[12933.673772] usb 3-1.2.4: new low-speed USB device number 8 using xhci_hcd
[12933.710831] scsi 0:0:0:0: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 6
[12933.711840] scsi 0:0:0:1: Direct-Access Generic- Micro SD/M2 1.08 PQ: 0 ANSI: 6
[12933.717336] sd 0:0:0:1: [sda] Media removed, stopped polling
[12933.717716] sd 0:0:0:1: [sda] Attached SCSI removable disk
[12933.718344] sd 0:0:0:0: [sdb] Media removed, stopped polling
[12933.719566] sd 0:0:0:0: [sdb] Attached SCSI removable disk
[12933.783399] usb 3-1.2.4: New USB device found, idVendor=1bcf, idProduct=0005, bcdDevice= 0.14
[12933.783432] usb 3-1.2.4: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[12933.783451] usb 3-1.2.4: Product: USB Optical Mouse
[12933.797563] input: USB Optical Mouse as /devices/pci0000:00/0000:00:1c.0/0000:01:00.0/0000:02:02.0/0000:39:00.0/usb3/3-1/3-1.2/3-1.2.4/3-1.2.4:1.0/0003:1BCF:0005.0005/input/input44
[12933.800568] hid-generic 0003:1BCF:0005.0005: input,hidraw4: USB HID v1.10 Mouse [USB Optical Mouse] on usb-0000:39:00.0-1.2.4/input0
[12934.021905] r8152 4-1.1.3:1.0 enx00e04ceabc41: renamed from eth0
[12937.252266] r8152 4-1.1.3:1.0 enx00e04ceabc41: carrier on
[12957.430278] wlp58s0: deauthenticating from 88:71:b1:81:93:1b by local choice (Reason: 3=DEAUTH_LEAVING)
[15871.046928] usb 1-1: new full-speed USB device number 5 using xhci_hcd
[15871.254379] usb 1-1: New USB device found, idVendor=047f, idProduct=c037, bcdDevice= 2.05
[15871.254407] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[15871.254415] usb 1-1: Product: Plantronics Blackwire 315.1
[15871.254429] usb 1-1: Manufacturer: Plantronics
[15871.254434] usb 1-1: SerialNumber: BD66DC96BEA24BC0A963198223CC9CBC
[15871.345221] input: Plantronics Plantronics Blackwire 315.1 Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.3/0003:047F:C037.0006/input/input45
[15871.399389] input: Plantronics Plantronics Blackwire 315.1 as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.3/0003:047F:C037.0006/input/input46
[15871.419418] input: Plantronics Plantronics Blackwire 315.1 as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.3/0003:047F:C037.0006/input/input47
[15871.419896] hid-generic 0003:047F:C037.0006: input,hiddev1,hidraw5: USB HID v1.11 Device [Plantronics Plantronics Blackwire 315.1] on usb-0000:00:14.0-1/input3
[15872.262986] usb 1-1: Warning! Unlikely big volume range (=9234), cval->res is probably wrong.
[15872.263002] usb 1-1: [11] FU [Sidetone Playback Volume] ch = 1, val = 0/9234/1
[15872.731263] usbcore: registered new interface driver snd-usb-audio
[17506.489780] r8152 4-1.1.3:1.0 enx00e04ceabc41: carrier off
[17509.720457] r8152 4-1.1.3:1.0 enx00e04ceabc41: carrier on
[17518.331162] r8152 4-1.1.3:1.0 enx00e04ceabc41: carrier off
[17521.945730] r8152 4-1.1.3:1.0 enx00e04ceabc41: carrier on
[18307.292352] systemd-sysv-generator[27041]: SysV service '/etc/init.d/xl2tpd' lacks a native systemd unit file, automatically generating a unit file for compatibility.
[18307.292364] systemd-sysv-generator[27041]: Please update package to include a native systemd unit file.
[18307.292368] systemd-sysv-generator[27041]: ! This compatibility logic is deprecated, expect removal soon. !
[18509.112181] r8152 4-1.1.3:1.0 enx00e04ceabc41: carrier off
[18512.725570] r8152 4-1.1.3:1.0 enx00e04ceabc41: carrier on
[20703.475274] r8152 4-1.1.3:1.0 enx00e04ceabc41: carrier off
[20707.311916] r8152 4-1.1.3:1.0 enx00e04ceabc41: carrier on
[27711.677718] usb 1-1: USB disconnect, device number 5
[27812.782504] usb 4-1.2: USB disconnect, device number 4
[27812.931253] usb 3-1.2: USB disconnect, device number 4
[27812.931259] usb 3-1.2.3: USB disconnect, device number 7
[27813.221613] usb 3-1.2.4: USB disconnect, device number 8
[27819.605577] usb 3-1: USB disconnect, device number 2
[27819.605598] usb 3-1.1: USB disconnect, device number 3
[27819.609152] usb 3-1.5: USB disconnect, device number 5
[27819.695744] xhci_hcd 0000:39:00.0: xHCI host controller not responding, assume dead
[27819.695802] xhci_hcd 0000:39:00.0: HC died; cleaning up
[27819.695876] r8152 4-1.1.3:1.0 enx00e04ceabc41: Stop submitting intr, status -108
[27819.779574] xhci_hcd 0000:39:00.0: remove, state 1
[27819.779880] usb usb4: USB disconnect, device number 1
[27819.830813] usb 4-1: USB disconnect, device number 2
[27819.830834] usb 4-1.1: USB disconnect, device number 3
[27819.830847] r8152-cfgselector 4-1.1.3: USB disconnect, device number 6
[27819.900351] usb 4-1.4: USB disconnect, device number 5
[27820.063456] xhci_hcd 0000:39:00.0: USB bus 4 deregistered
[27820.063502] xhci_hcd 0000:39:00.0: remove, state 1
[27820.063516] usb usb3: USB disconnect, device number 1
[27820.069515] xhci_hcd 0000:39:00.0: Host halt failed, -19
[27820.069535] xhci_hcd 0000:39:00.0: Host not accessible, reset failed.
[27820.070070] xhci_hcd 0000:39:00.0: USB bus 3 deregistered
[27820.100286] pci_bus 0000:02: Allocating resources
[27820.100823] pcieport 0000:02:01.0: bridge window [io 0x1000-0x0fff] to [bus 04-38] add_size 1000
[27820.100850] pcieport 0000:02:02.0: bridge window [io 0x1000-0x0fff] to [bus 39] add_size 1000
[27820.100864] pcieport 0000:02:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 39] add_size 200000 add_align 100000
[27820.100884] pcieport 0000:01:00.0: bridge window [io 0x1000-0x0fff] to [bus 02-39] add_size 2000
[27820.100904] pcieport 0000:01:00.0: bridge window [io size 0x2000]: can't assign; no space
[27820.100915] pcieport 0000:01:00.0: bridge window [io size 0x2000]: failed to assign
[27820.100926] pcieport 0000:01:00.0: bridge window [io size 0x2000]: can't assign; no space
[27820.100935] pcieport 0000:01:00.0: bridge window [io size 0x2000]: failed to assign
[27820.100958] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[27820.100967] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[27820.100976] pcieport 0000:02:01.0: bridge window [io size 0x1000]: can't assign; no space
[27820.100984] pcieport 0000:02:01.0: bridge window [io size 0x1000]: failed to assign
[27820.100993] pcieport 0000:02:02.0: bridge window [io size 0x1000]: can't assign; no space
[27820.101001] pcieport 0000:02:02.0: bridge window [io size 0x1000]: failed to assign
[27820.101016] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[27820.101025] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[27820.101035] pcieport 0000:02:02.0: bridge window [io size 0x1000]: can't assign; no space
[27820.101042] pcieport 0000:02:02.0: bridge window [io size 0x1000]: failed to assign
[27820.101051] pcieport 0000:02:01.0: bridge window [io size 0x1000]: can't assign; no space
[27820.101058] pcieport 0000:02:01.0: bridge window [io size 0x1000]: failed to assign
[27824.798489] pcieport 0000:02:00.0: Unable to change power state from D3hot to D0, device inaccessible
[27824.802318] pci_bus 0000:03: busn_res: [bus 03] is released
[27824.802886] pci_bus 0000:04: busn_res: [bus 04-38] is released
[27824.803453] pci_bus 0000:39: busn_res: [bus 39] is released
[27824.803960] pci_bus 0000:02: busn_res: [bus 02-39] is released
[27851.076583] Bluetooth: MGMT ver 1.23
[27851.091414] NET: Registered PF_ALG protocol family
[27851.155503] Bluetooth: RFCOMM TTY layer initialized
[27851.155531] Bluetooth: RFCOMM socket layer initialized
[27851.155547] Bluetooth: RFCOMM ver 1.11
[27851.741614] wlp58s0: authenticate with 88:71:b1:81:93:1b (local address=9c:b6:d0:d1:6a:b1)
[27851.741624] wlp58s0: send auth to 88:71:b1:81:93:1b (try 1/3)
[27851.744958] wlp58s0: authenticated
[27851.746617] wlp58s0: associate with 88:71:b1:81:93:1b (try 1/3)
[27851.766232] wlp58s0: RX AssocResp from 88:71:b1:81:93:1b (capab=0x1011 status=0 aid=2)
[27851.769206] wlp58s0: associated
[27851.864606] wlp58s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 88:71:b1:81:93:1b
[38490.041328] wlp58s0: deauthenticating from 88:71:b1:81:93:1b by local choice (Reason: 3=DEAUTH_LEAVING)
[38491.685151] PM: suspend entry (deep)
[38491.703610] Filesystems sync: 0.018 seconds
[38491.714863] Freezing user space processes
[38491.717180] Freezing user space processes completed (elapsed 0.002 seconds)
[38491.717195] OOM killer disabled.
[38491.717199] Freezing remaining freezable tasks
[38491.718972] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
[38491.719111] printk: Suspending console(s) (use no_console_suspend to debug)
[38492.325511] ACPI: EC: interrupt blocked
[38492.359088] ACPI: PM: Preparing to enter system sleep state S3
[38492.369308] ACPI: EC: event blocked
[38492.369312] ACPI: EC: EC stopped
[38492.369314] ACPI: PM: Saving platform NVS memory
[38492.372774] Disabling non-boot CPUs ...
[38492.375782] smpboot: CPU 3 is now offline
[38492.380181] smpboot: CPU 2 is now offline
[38492.383216] smpboot: CPU 1 is now offline
[38492.395468] ACPI: PM: Low-level resume complete
[38492.395511] ACPI: EC: EC started
[38492.395512] ACPI: PM: Restoring platform NVS memory
[38492.397467] Enabling non-boot CPUs ...
[38492.397491] smpboot: Booting Node 0 Processor 1 APIC 0x2
[38492.398167] CPU1 is up
[38492.398182] smpboot: Booting Node 0 Processor 2 APIC 0x1
[38492.398900] CPU2 is up
[38492.398916] smpboot: Booting Node 0 Processor 3 APIC 0x3
[38492.399568] CPU3 is up
[38492.402441] ACPI: PM: Waking up from system sleep state S3
[38492.434624] ACPI: EC: interrupt unblocked
[38492.452816] ACPI: EC: event unblocked
[38492.455200] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1
[38492.455209] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0
[38492.468755] nvme nvme0: 4/0/0 default/read/poll queues
[38492.481644] i915 0000:00:02.0: [drm] GT0: HuC: authenticated for all workloads
[38492.481647] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled
[38492.481650] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled
[38492.690995] atkbd serio0: Failed to deactivate keyboard on isa0060/serio0
[38492.703247] usb 1-5: reset high-speed USB device number 4 using xhci_hcd
[38492.963293] usb 1-3: reset full-speed USB device number 2 using xhci_hcd
[38493.219298] usb 1-4: reset full-speed USB device number 3 using xhci_hcd
[38493.362869] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin
[38493.362875] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111
[38493.364827] OOM killer enabled.
[38493.364831] Restarting tasks ... done.
[38493.368779] random: crng reseeded on system resumption
[38493.483145] PM: suspend exit
[38493.722746] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin
[38493.744903] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported.
[38493.931809] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])
[38499.387710] wlp58s0: authenticate with 88:71:b1:81:93:1a (local address=9c:b6:d0:d1:6a:b1)
[38499.387725] wlp58s0: send auth to 88:71:b1:81:93:1a (try 1/3)
[38499.389977] wlp58s0: authenticated
[38499.391006] wlp58s0: associate with 88:71:b1:81:93:1a (try 1/3)
[38499.420944] wlp58s0: RX AssocResp from 88:71:b1:81:93:1a (capab=0x1431 status=0 aid=1)
[38499.424345] wlp58s0: associated
[38499.487483] wlp58s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 88:71:b1:81:93:1a
[38573.414759] wlp58s0: disconnect from AP 88:71:b1:81:93:1a for new auth to 88:71:b1:81:93:1b
[38573.500282] wlp58s0: authenticate with 88:71:b1:81:93:1b (local address=9c:b6:d0:d1:6a:b1)
[38573.500296] wlp58s0: send auth to 88:71:b1:81:93:1b (try 1/3)
[38573.503446] wlp58s0: authenticated
[38573.506458] wlp58s0: associate with 88:71:b1:81:93:1b (try 1/3)
[38573.539343] wlp58s0: RX ReassocResp from 88:71:b1:81:93:1b (capab=0x1011 status=0 aid=1)
[38573.542218] wlp58s0: associated
[38573.564688] wlp58s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 88:71:b1:81:93:1b
[38776.569561] systemd-sysv-generator[40936]: SysV service '/etc/init.d/xl2tpd' lacks a native systemd unit file, automatically generating a unit file for compatibility.
[38776.569571] systemd-sysv-generator[40936]: Please update package to include a native systemd unit file.
[38776.569575] systemd-sysv-generator[40936]: ! This compatibility logic is deprecated, expect removal soon. !
[38821.020562] systemd-sysv-generator[41755]: SysV service '/etc/init.d/xl2tpd' lacks a native systemd unit file, automatically generating a unit file for compatibility.
[38821.020573] systemd-sysv-generator[41755]: Please update package to include a native systemd unit file.
[38821.020577] systemd-sysv-generator[41755]: ! This compatibility logic is deprecated, expect removal soon. !
[40817.865395] wlp58s0: deauthenticating from 88:71:b1:81:93:1b by local choice (Reason: 3=DEAUTH_LEAVING)
[40819.593036] PM: suspend entry (deep)
[40819.607095] Filesystems sync: 0.014 seconds
[40819.610776] Freezing user space processes
[40819.612368] Freezing user space processes completed (elapsed 0.001 seconds)
[40819.612371] OOM killer disabled.
[40819.612372] Freezing remaining freezable tasks
[40819.613715] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
[40819.613765] printk: Suspending console(s) (use no_console_suspend to debug)
[40820.211030] ACPI: EC: interrupt blocked
[40820.242596] ACPI: PM: Preparing to enter system sleep state S3
[40820.253819] ACPI: EC: event blocked
[40820.253824] ACPI: EC: EC stopped
[40820.253826] ACPI: PM: Saving platform NVS memory
[40820.257260] Disabling non-boot CPUs ...
[40820.259183] smpboot: CPU 3 is now offline
[40820.263329] smpboot: CPU 2 is now offline
[40820.266326] smpboot: CPU 1 is now offline
[40820.274989] ACPI: PM: Low-level resume complete
[40820.275033] ACPI: EC: EC started
[40820.275034] ACPI: PM: Restoring platform NVS memory
[40820.276985] Enabling non-boot CPUs ...
[40820.277012] smpboot: Booting Node 0 Processor 1 APIC 0x2
[40820.277686] CPU1 is up
[40820.277701] smpboot: Booting Node 0 Processor 2 APIC 0x1
[40820.278405] CPU2 is up
[40820.278420] smpboot: Booting Node 0 Processor 3 APIC 0x3
[40820.279081] CPU3 is up
[40820.281957] ACPI: PM: Waking up from system sleep state S3
[40820.318322] ACPI: EC: interrupt unblocked
[40820.336490] ACPI: EC: event unblocked
[40820.339508] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1
[40820.339517] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0
[40820.352420] nvme nvme0: 4/0/0 default/read/poll queues
[40820.365283] i915 0000:00:02.0: [drm] GT0: HuC: authenticated for all workloads
[40820.365288] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled
[40820.365290] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled
[40820.586862] usb 1-5: reset high-speed USB device number 4 using xhci_hcd
[40820.598648] atkbd serio0: Failed to deactivate keyboard on isa0060/serio0
[40820.780184] atkbd serio0: Spurious ACK on isa0060/serio0. Some program might be trying to access hardware directly.
[40820.842846] usb 1-3: reset full-speed USB device number 2 using xhci_hcd
[40821.102861] usb 1-4: reset full-speed USB device number 3 using xhci_hcd
[40821.246875] OOM killer enabled.
[40821.246879] Restarting tasks ... done.
[40821.252552] random: crng reseeded on system resumption
[40821.410064] PM: suspend exit
[40821.457215] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin
[40821.457219] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111
[40821.804534] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])
[40821.821208] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin
[40821.844370] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported.
[40826.887818] wlp58s0: authenticate with 58:8b:f3:1f:3f:50 (local address=9c:b6:d0:d1:6a:b1)
[40826.887825] wlp58s0: send auth to 58:8b:f3:1f:3f:50 (try 1/3)
[40826.888703] wlp58s0: authenticated
[40826.890690] wlp58s0: associate with 58:8b:f3:1f:3f:50 (try 1/3)
[40826.892868] wlp58s0: RX AssocResp from 58:8b:f3:1f:3f:50 (capab=0x11 status=0 aid=2)
[40826.895714] wlp58s0: associated
[40826.947276] wlp58s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 58:8b:f3:1f:3f:50
[40885.957795] sctp: Hash tables configured (bind 256/256)
[41605.534439] usb 2-1: new SuperSpeed USB device number 2 using xhci_hcd
[41605.551346] usb 2-1: New USB device found, idVendor=0781, idProduct=5580, bcdDevice= 0.10
[41605.551374] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[41605.551384] usb 2-1: Product: Extreme
[41605.551392] usb 2-1: Manufacturer: SanDisk
[41605.551399] usb 2-1: SerialNumber: AA011230150857540508
[41605.554599] usb-storage 2-1:1.0: USB Mass Storage device detected
[41605.555469] scsi host0: usb-storage 2-1:1.0
[41606.572243] scsi 0:0:0:0: Direct-Access SanDisk Extreme 0001 PQ: 0 ANSI: 6
[41606.583357] sd 0:0:0:0: [sda] 61282631 512-byte logical blocks: (31.4 GB/29.2 GiB)
[41606.583692] sd 0:0:0:0: [sda] Write Protect is off
[41606.583696] sd 0:0:0:0: [sda] Mode Sense: 53 00 00 08
[41606.583966] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[41606.614969] sda: sda1 sda2
[41606.615113] sd 0:0:0:0: [sda] Attached SCSI removable disk
[41622.507243] usb 2-1: USB disconnect, device number 2
[44177.000699] ath10k_pci 0000:3a:00.0: firmware crashed! (guid 1b4a40c5-4495-4c5b-9df9-b7395848239c)
[44177.000720] ath10k_pci 0000:3a:00.0: qca6174 hw3.2 target 0x05030000 chip_id 0x00340aff sub 1a56:1535
[44177.000731] ath10k_pci 0000:3a:00.0: kconfig debug 0 debugfs 0 tracing 0 dfs 0 testmode 0
[44177.002450] ath10k_pci 0000:3a:00.0: firmware ver WLAN.RM.4.4.1-00309- api 6 features wowlan,ignore-otp,mfp crc32 0793bcf2
[44177.004168] ath10k_pci 0000:3a:00.0: board_file api 2 bmi_id N/A crc32 d2863f91
[44177.004176] ath10k_pci 0000:3a:00.0: htt-ver 3.87 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1
[44177.014494] ath10k_pci 0000:3a:00.0: failed to get memcpy hi address for firmware address 4: -16
[44177.014498] ath10k_pci 0000:3a:00.0: failed to read firmware dump area: -16
[44177.014500] ath10k_pci 0000:3a:00.0: Copy Engine register dump:
[44177.014508] ath10k_pci 0000:3a:00.0: [00]: 0x00034400 12 12 3 3
[44177.014517] ath10k_pci 0000:3a:00.0: [01]: 0x00034800 19 19 64 65
[44177.014525] ath10k_pci 0000:3a:00.0: [02]: 0x00034c00 39 37 36 37
[44177.014532] ath10k_pci 0000:3a:00.0: [03]: 0x00035000 20 20 22 20
[44177.014540] ath10k_pci 0000:3a:00.0: [04]: 0x00035400 6457 6457 222 158
[44177.014548] ath10k_pci 0000:3a:00.0: [05]: 0x00035800 0 0 64 0
[44177.014556] ath10k_pci 0000:3a:00.0: [06]: 0x00035c00 29 29 0 0
[44177.014563] ath10k_pci 0000:3a:00.0: [07]: 0x00036000 1 0 1 0
[44177.109219] ieee80211 phy0: Hardware restart was requested
[44177.429445] ath10k_pci 0000:3a:00.0: device successfully recovered
[44407.827878] wlp58s0: deauthenticating from 58:8b:f3:1f:3f:50 by local choice (Reason: 3=DEAUTH_LEAVING)
[44418.477798] wlp58s0: authenticate with 58:8b:f3:1f:3f:50 (local address=9c:b6:d0:d1:6a:b1)
[44418.477805] wlp58s0: send auth to 58:8b:f3:1f:3f:50 (try 1/3)
[44418.478800] wlp58s0: authenticated
[44418.480431] wlp58s0: associate with 58:8b:f3:1f:3f:50 (try 1/3)
[44418.482659] wlp58s0: RX AssocResp from 58:8b:f3:1f:3f:50 (capab=0x11 status=0 aid=2)
[44418.485675] wlp58s0: associated
[44418.507960] wlp58s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 58:8b:f3:1f:3f:50
[46222.128835] ath10k_pci 0000:3a:00.0: firmware crashed! (guid bf3b94e3-2299-40d4-8e23-b36b04eada55)
[46222.128859] ath10k_pci 0000:3a:00.0: qca6174 hw3.2 target 0x05030000 chip_id 0x00340aff sub 1a56:1535
[46222.128871] ath10k_pci 0000:3a:00.0: kconfig debug 0 debugfs 0 tracing 0 dfs 0 testmode 0
[46222.130766] ath10k_pci 0000:3a:00.0: firmware ver WLAN.RM.4.4.1-00309- api 6 features wowlan,ignore-otp,mfp crc32 0793bcf2
[46222.131813] ath10k_pci 0000:3a:00.0: board_file api 2 bmi_id N/A crc32 d2863f91
[46222.131817] ath10k_pci 0000:3a:00.0: htt-ver 3.87 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1
[46222.142135] ath10k_pci 0000:3a:00.0: failed to get memcpy hi address for firmware address 4: -16
[46222.142142] ath10k_pci 0000:3a:00.0: failed to read firmware dump area: -16
[46222.142145] ath10k_pci 0000:3a:00.0: Copy Engine register dump:
[46222.142153] ath10k_pci 0000:3a:00.0: [00]: 0x00034400 12 12 3 3
[46222.142162] ath10k_pci 0000:3a:00.0: [01]: 0x00034800 27 27 392 393
[46222.142170] ath10k_pci 0000:3a:00.0: [02]: 0x00034c00 59 57 120 121
[46222.142177] ath10k_pci 0000:3a:00.0: [03]: 0x00035000 10 10 12 10
[46222.142185] ath10k_pci 0000:3a:00.0: [04]: 0x00035400 909 909 8 200
[46222.142192] ath10k_pci 0000:3a:00.0: [05]: 0x00035800 0 0 64 0
[46222.142200] ath10k_pci 0000:3a:00.0: [06]: 0x00035c00 18 18 24 24
[46222.142208] ath10k_pci 0000:3a:00.0: [07]: 0x00036000 1 0 1 0
[46222.238935] ieee80211 phy0: Hardware restart was requested
[46222.543545] ath10k_pci 0000:3a:00.0: device successfully recovered
[46396.872581] wlp58s0: deauthenticated from 58:8b:f3:1f:3f:50 (Reason: 16=GROUP_KEY_HANDSHAKE_TIMEOUT)
[46400.190559] ath10k_pci 0000:3a:00.0: failed to install key for vdev 0 peer 58:8b:f3:1f:3f:50: -110
[46400.190575] wlp58s0: failed to remove key (0, 58:8b:f3:1f:3f:50) from hardware (-110)
[46400.439212] wlp58s0: authenticate with 58:8b:f3:1f:3f:4f (local address=9c:b6:d0:d1:6a:b1)
[46400.439228] wlp58s0: send auth to 58:8b:f3:1f:3f:4f (try 1/3)
[46400.443325] wlp58s0: authenticated
[46400.446531] wlp58s0: associate with 58:8b:f3:1f:3f:4f (try 1/3)
[46400.450387] wlp58s0: RX AssocResp from 58:8b:f3:1f:3f:4f (capab=0x411 status=0 aid=2)
[46400.453836] wlp58s0: associated
[46708.167711] wlp58s0: disconnect from AP 58:8b:f3:1f:3f:4f for new auth to 58:8b:f3:1f:3f:50
[46708.245913] wlp58s0: authenticate with 58:8b:f3:1f:3f:50 (local address=9c:b6:d0:d1:6a:b1)
[46708.245928] wlp58s0: send auth to 58:8b:f3:1f:3f:50 (try 1/3)
[46708.248443] wlp58s0: authenticated
[46708.251151] wlp58s0: associate with 58:8b:f3:1f:3f:50 (try 1/3)
[46708.253034] wlp58s0: RX ReassocResp from 58:8b:f3:1f:3f:50 (capab=0x11 status=0 aid=2)
[46708.255964] wlp58s0: associated
[46708.269466] wlp58s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 58:8b:f3:1f:3f:50
[55688.363655] wlp58s0: deauthenticating from 58:8b:f3:1f:3f:50 by local choice (Reason: 3=DEAUTH_LEAVING)
[55691.642913] ath10k_pci 0000:3a:00.0: failed to install key for vdev 0 peer 58:8b:f3:1f:3f:50: -110
[55691.642938] wlp58s0: failed to remove key (0, 58:8b:f3:1f:3f:50) from hardware (-110)
[55692.223748] PM: suspend entry (deep)
[55692.232826] Filesystems sync: 0.009 seconds
[55692.237417] Freezing user space processes
[55692.238960] Freezing user space processes completed (elapsed 0.001 seconds)
[55692.238963] OOM killer disabled.
[55692.238964] Freezing remaining freezable tasks
[55692.240392] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
[55692.240444] printk: Suspending console(s) (use no_console_suspend to debug)
[55692.849324] ACPI: EC: interrupt blocked
[55692.878991] ACPI: PM: Preparing to enter system sleep state S3
[55692.890163] ACPI: EC: event blocked
[55692.890167] ACPI: EC: EC stopped
[55692.890170] ACPI: PM: Saving platform NVS memory
[55692.893726] Disabling non-boot CPUs ...
[55692.897089] smpboot: CPU 3 is now offline
[55692.901396] smpboot: CPU 2 is now offline
[55692.905081] smpboot: CPU 1 is now offline
[55692.910389] ACPI: PM: Low-level resume complete
[55692.910434] ACPI: EC: EC started
[55692.910435] ACPI: PM: Restoring platform NVS memory
[55692.912395] Enabling non-boot CPUs ...
[55692.912419] smpboot: Booting Node 0 Processor 1 APIC 0x2
[55692.913111] CPU1 is up
[55692.913126] smpboot: Booting Node 0 Processor 2 APIC 0x1
[55692.913834] CPU2 is up
[55692.913850] smpboot: Booting Node 0 Processor 3 APIC 0x3
[55692.914501] CPU3 is up
[55692.917376] ACPI: PM: Waking up from system sleep state S3
[55692.947310] ACPI: EC: interrupt unblocked
[55692.962925] ACPI: EC: event unblocked
[55692.965167] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1
[55692.965268] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0
[55692.975063] nvme nvme0: 4/0/0 default/read/poll queues
[55692.991677] i915 0000:00:02.0: [drm] GT0: HuC: authenticated for all workloads
[55692.991680] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled
[55692.991681] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled
[55693.193015] atkbd serio0: Failed to deactivate keyboard on isa0060/serio0
[55693.217290] usb 1-3: reset full-speed USB device number 2 using xhci_hcd
[55693.365722] atkbd serio0: Spurious ACK on isa0060/serio0. Some program might be trying to access hardware directly.
[55693.473274] usb 1-4: reset full-speed USB device number 3 using xhci_hcd
[55693.729205] usb 1-5: reset high-speed USB device number 4 using xhci_hcd
[55693.932834] OOM killer enabled.
[55693.932837] Restarting tasks ... done.
[55693.937529] random: crng reseeded on system resumption
[55694.042372] PM: suspend exit
[55694.136261] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin
[55694.136276] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111
[55694.445426] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])
[55694.491140] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin
[55694.514751] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported.
[55699.843423] wlp58s0: authenticate with 58:8b:f3:1f:3f:50 (local address=9c:b6:d0:d1:6a:b1)
[55699.843435] wlp58s0: send auth to 58:8b:f3:1f:3f:50 (try 1/3)
[55699.844310] wlp58s0: authenticated
[55699.844968] wlp58s0: associate with 58:8b:f3:1f:3f:50 (try 1/3)
[55699.847998] wlp58s0: RX AssocResp from 58:8b:f3:1f:3f:50 (capab=0x11 status=0 aid=1)
[55699.850649] wlp58s0: associated
[55699.905253] wlp58s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 58:8b:f3:1f:3f:50
[57531.697326] wlp58s0: deauthenticating from 58:8b:f3:1f:3f:50 by local choice (Reason: 3=DEAUTH_LEAVING)
[57533.289870] PM: suspend entry (deep)
[57533.308060] Filesystems sync: 0.018 seconds
[57533.311678] Freezing user space processes
[57533.313463] Freezing user space processes completed (elapsed 0.001 seconds)
[57533.313467] OOM killer disabled.
[57533.313468] Freezing remaining freezable tasks
[57533.315260] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
[57533.315376] printk: Suspending console(s) (use no_console_suspend to debug)
[57533.911463] ACPI: EC: interrupt blocked
[57533.943133] ACPI: PM: Preparing to enter system sleep state S3
[57533.953352] ACPI: EC: event blocked
[57533.953357] ACPI: EC: EC stopped
[57533.953359] ACPI: PM: Saving platform NVS memory
[57533.956751] Disabling non-boot CPUs ...
[57533.959817] smpboot: CPU 3 is now offline
[57533.964572] smpboot: CPU 2 is now offline
[57533.967107] smpboot: CPU 1 is now offline
[57533.974609] ACPI: PM: Low-level resume complete
[57533.974653] ACPI: EC: EC started
[57533.974654] ACPI: PM: Restoring platform NVS memory
[57533.976607] Enabling non-boot CPUs ...
[57533.976632] smpboot: Booting Node 0 Processor 1 APIC 0x2
[57533.977308] CPU1 is up
[57533.977322] smpboot: Booting Node 0 Processor 2 APIC 0x1
[57533.978043] CPU2 is up
[57533.978060] smpboot: Booting Node 0 Processor 3 APIC 0x3
[57533.978710] CPU3 is up
[57533.981608] ACPI: PM: Waking up from system sleep state S3
[57534.013663] ACPI: EC: interrupt unblocked
[57534.028946] ACPI: EC: event unblocked
[57534.032341] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1
[57534.032360] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0
[57534.045402] nvme nvme0: 4/0/0 default/read/poll queues
[57534.057786] i915 0000:00:02.0: [drm] GT0: HuC: authenticated for all workloads
[57534.057794] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled
[57534.057797] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled
[57534.275098] atkbd serio0: Failed to deactivate keyboard on isa0060/serio0
[57534.279355] usb 1-5: reset high-speed USB device number 4 using xhci_hcd
[57534.539331] usb 1-4: reset full-speed USB device number 3 using xhci_hcd
[57534.795367] usb 1-3: reset full-speed USB device number 2 using xhci_hcd
[57534.936734] OOM killer enabled.
[57534.936739] Restarting tasks ... done.
[57534.943129] random: crng reseeded on system resumption
[57535.045393] PM: suspend exit
[57535.141620] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin
[57535.141637] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111
[57535.499128] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin
[57535.508562] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])
[57535.525110] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported.
[57540.988574] wlp58s0: authenticate with 58:8b:f3:1f:3f:50 (local address=9c:b6:d0:d1:6a:b1)
[57540.988589] wlp58s0: send auth to 58:8b:f3:1f:3f:50 (try 1/3)
[57540.989523] wlp58s0: authenticated
[57540.991090] wlp58s0: associate with 58:8b:f3:1f:3f:50 (try 1/3)
[57540.992605] wlp58s0: RX AssocResp from 58:8b:f3:1f:3f:50 (capab=0x11 status=0 aid=2)
[57540.996113] wlp58s0: associated
[57541.053714] wlp58s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 58:8b:f3:1f:3f:50
[57549.041727] wlp58s0: deauthenticated from 58:8b:f3:1f:3f:50 (Reason: 15=4WAY_HANDSHAKE_TIMEOUT)
[57549.339616] wlp58s0: authenticate with 58:8b:f3:1f:3f:4f (local address=9c:b6:d0:d1:6a:b1)
[57549.339634] wlp58s0: send auth to 58:8b:f3:1f:3f:4f (try 1/3)
[57549.345103] wlp58s0: authenticated
[57549.351473] wlp58s0: associate with 58:8b:f3:1f:3f:4f (try 1/3)
[57549.355430] wlp58s0: RX AssocResp from 58:8b:f3:1f:3f:4f (capab=0x411 status=0 aid=1)
[57549.359350] wlp58s0: associated
[57856.549404] wlp58s0: disconnect from AP 58:8b:f3:1f:3f:4f for new auth to 58:8b:f3:1f:3f:50
[57856.622302] wlp58s0: authenticate with 58:8b:f3:1f:3f:50 (local address=9c:b6:d0:d1:6a:b1)
[57856.622317] wlp58s0: send auth to 58:8b:f3:1f:3f:50 (try 1/3)
[57856.623414] wlp58s0: authenticated
[57856.632740] wlp58s0: associate with 58:8b:f3:1f:3f:50 (try 1/3)
[57856.634267] wlp58s0: RX ReassocResp from 58:8b:f3:1f:3f:50 (capab=0x11 status=0 aid=2)
[57856.638512] wlp58s0: associated
[57856.650511] wlp58s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 58:8b:f3:1f:3f:50
[58505.580891] usb 1-2: new high-speed USB device number 6 using xhci_hcd
[58505.718682] usb 1-2: New USB device found, idVendor=04e8, idProduct=6860, bcdDevice= c.00
[58505.718699] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[58505.718706] usb 1-2: Product: SAMSUNG_Android
[58505.718711] usb 1-2: Manufacturer: SAMSUNG
[58505.718715] usb 1-2: SerialNumber: R3CM50B9A4X
[58514.057916] usb 1-2: USB disconnect, device number 6
[58522.637287] wlp58s0: deauthenticating from 58:8b:f3:1f:3f:50 by local choice (Reason: 3=DEAUTH_LEAVING)
[58525.811987] ath10k_pci 0000:3a:00.0: failed to install key for vdev 0 peer 58:8b:f3:1f:3f:50: -110
[58525.812014] wlp58s0: failed to remove key (0, 58:8b:f3:1f:3f:50) from hardware (-110)
[58526.350455] PM: suspend entry (deep)
[58526.367234] Filesystems sync: 0.016 seconds
[58526.371831] Freezing user space processes
[58526.373529] Freezing user space processes completed (elapsed 0.001 seconds)
[58526.373533] OOM killer disabled.
[58526.373534] Freezing remaining freezable tasks
[58526.374945] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
[58526.374996] printk: Suspending console(s) (use no_console_suspend to debug)
[58527.012753] ACPI: EC: interrupt blocked
[58527.043962] ACPI: PM: Preparing to enter system sleep state S3
[58527.054068] ACPI: EC: event blocked
[58527.054072] ACPI: EC: EC stopped
[58527.054074] ACPI: PM: Saving platform NVS memory
[58527.057562] Disabling non-boot CPUs ...
[58527.059471] smpboot: CPU 3 is now offline
[58527.063110] smpboot: CPU 2 is now offline
[58527.069066] smpboot: CPU 1 is now offline
[58527.074244] ACPI: PM: Low-level resume complete
[58527.074289] ACPI: EC: EC started
[58527.074290] ACPI: PM: Restoring platform NVS memory
[58527.076259] Enabling non-boot CPUs ...
[58527.076284] smpboot: Booting Node 0 Processor 1 APIC 0x2
[58527.076961] CPU1 is up
[58527.076977] smpboot: Booting Node 0 Processor 2 APIC 0x1
[58527.077694] CPU2 is up
[58527.077710] smpboot: Booting Node 0 Processor 3 APIC 0x3
[58527.078362] CPU3 is up
[58527.081247] ACPI: PM: Waking up from system sleep state S3
[58532.172837] ACPI: EC: interrupt unblocked
[58532.206981] ACPI: EC: event unblocked
[58532.211089] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1
[58532.211114] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0
[58532.223296] nvme nvme0: 4/0/0 default/read/poll queues
[58532.236708] i915 0000:00:02.0: [drm] GT0: HuC: authenticated for all workloads
[58532.236721] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled
[58532.236728] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled
[58532.478159] usb 1-5: reset high-speed USB device number 4 using xhci_hcd
[58532.664697] typec port0-partner: PM: parent port0 should not be sleeping
[58532.734245] usb 1-3: reset full-speed USB device number 2 using xhci_hcd
[58532.994158] usb 1-4: reset full-speed USB device number 3 using xhci_hcd
[58533.138190] OOM killer enabled.
[58533.138194] Restarting tasks ...
[58533.138448] pci 0000:01:00.0: [8086:1576] type 01 class 0x060400 PCIe Switch Upstream Port
[58533.138504] pci 0000:01:00.0: PCI bridge to [bus 02-39]
[58533.138523] pci 0000:01:00.0: bridge window [mem 0xc4000000-0xda0fffff]
[58533.138543] pci 0000:01:00.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref]
[58533.138563] pci 0000:01:00.0: enabling Extended Tags
[58533.138706] pci 0000:01:00.0: supports D1 D2
[58533.138711] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[58533.140154] done.
[58533.140166] random: crng reseeded on system resumption
[58533.140658] pci 0000:01:00.0: 15.752 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x2 link at 0000:00:1c.0 (capable of 31.504 Gb/s with 8.0 GT/s PCIe x4 link)
[58533.141996] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])
[58533.167494] pci 0000:02:00.0: [8086:1576] type 01 class 0x060400 PCIe Switch Downstream Port
[58533.167571] pci 0000:02:00.0: PCI bridge to [bus 03]
[58533.167598] pci 0000:02:00.0: bridge window [mem 0xda000000-0xda0fffff]
[58533.167649] pci 0000:02:00.0: enabling Extended Tags
[58533.167850] pci 0000:02:00.0: supports D1 D2
[58533.167857] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[58533.169447] pci 0000:02:01.0: [8086:1576] type 01 class 0x060400 PCIe Switch Downstream Port
[58533.169565] pci 0000:02:01.0: PCI bridge to [bus 04-38]
[58533.169608] pci 0000:02:01.0: bridge window [mem 0xc4000000-0xd9efffff]
[58533.169644] pci 0000:02:01.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref]
[58533.169705] pci 0000:02:01.0: enabling Extended Tags
[58533.170037] pci 0000:02:01.0: supports D1 D2
[58533.170055] pci 0000:02:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[58533.195625] pci 0000:02:02.0: [8086:1576] type 01 class 0x060400 PCIe Switch Downstream Port
[58533.195748] pci 0000:02:02.0: PCI bridge to [bus 39]
[58533.195795] pci 0000:02:02.0: bridge window [mem 0xd9f00000-0xd9ffffff]
[58533.195875] pci 0000:02:02.0: enabling Extended Tags
[58533.205533] pci 0000:02:02.0: supports D1 D2
[58533.205557] pci 0000:02:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[58533.219935] pci 0000:01:00.0: PCI bridge to [bus 02-39]
[58533.221365] pci 0000:02:00.0: PCI bridge to [bus 03]
[58533.222611] pci 0000:02:01.0: PCI bridge to [bus 04-38]
[58533.229466] pci 0000:39:00.0: [8086:15b5] type 00 class 0x0c0330 PCIe Endpoint
[58533.229547] pci 0000:39:00.0: BAR 0 [mem 0xd9f00000-0xd9f0ffff]
[58533.229745] pci 0000:39:00.0: enabling Extended Tags
[58533.230181] pci 0000:39:00.0: supports D1 D2
[58533.230192] pci 0000:39:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[58533.230425] pci 0000:39:00.0: 8.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x4 link at 0000:02:02.0 (capable of 31.504 Gb/s with 8.0 GT/s PCIe x4 link)
[58533.235247] pci 0000:02:02.0: PCI bridge to [bus 39]
[58533.235339] pci_bus 0000:02: Allocating resources
[58533.235374] pci 0000:02:01.0: bridge window [io 0x1000-0x0fff] to [bus 04-38] add_size 1000
[58533.235388] pci 0000:02:02.0: bridge window [io 0x1000-0x0fff] to [bus 39] add_size 1000
[58533.235398] pci 0000:02:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 39] add_size 200000 add_align 100000
[58533.235410] pci 0000:01:00.0: bridge window [io 0x1000-0x0fff] to [bus 02-39] add_size 2000
[58533.235424] pci 0000:01:00.0: bridge window [io size 0x2000]: can't assign; no space
[58533.235431] pci 0000:01:00.0: bridge window [io size 0x2000]: failed to assign
[58533.235440] pci 0000:01:00.0: bridge window [io size 0x2000]: can't assign; no space
[58533.235446] pci 0000:01:00.0: bridge window [io size 0x2000]: failed to assign
[58533.235461] pci 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[58533.235468] pci 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[58533.235474] pci 0000:02:01.0: bridge window [io size 0x1000]: can't assign; no space
[58533.235480] pci 0000:02:01.0: bridge window [io size 0x1000]: failed to assign
[58533.235486] pci 0000:02:02.0: bridge window [io size 0x1000]: can't assign; no space
[58533.235491] pci 0000:02:02.0: bridge window [io size 0x1000]: failed to assign
[58533.235500] pci 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[58533.235506] pci 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[58533.235513] pci 0000:02:02.0: bridge window [io size 0x1000]: can't assign; no space
[58533.235518] pci 0000:02:02.0: bridge window [io size 0x1000]: failed to assign
[58533.235524] pci 0000:02:01.0: bridge window [io size 0x1000]: can't assign; no space
[58533.235530] pci 0000:02:01.0: bridge window [io size 0x1000]: failed to assign
[58533.235537] pci 0000:02:00.0: PCI bridge to [bus 03]
[58533.235550] pci 0000:02:00.0: bridge window [mem 0xda000000-0xda0fffff]
[58533.235574] pci 0000:02:01.0: PCI bridge to [bus 04-38]
[58533.235589] pci 0000:02:01.0: bridge window [mem 0xc4000000-0xd9efffff]
[58533.235599] pci 0000:02:01.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref]
[58533.235620] pci 0000:02:02.0: PCI bridge to [bus 39]
[58533.235634] pci 0000:02:02.0: bridge window [mem 0xd9f00000-0xd9ffffff]
[58533.235652] pci 0000:01:00.0: PCI bridge to [bus 02-39]
[58533.235667] pci 0000:01:00.0: bridge window [mem 0xc4000000-0xda0fffff]
[58533.235678] pci 0000:01:00.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref]
[58533.255472] xhci_hcd 0000:39:00.0: xHCI Host Controller
[58533.255507] xhci_hcd 0000:39:00.0: new USB bus registered, assigned bus number 3
[58533.256795] xhci_hcd 0000:39:00.0: hcc params 0x200077c1 hci version 0x110 quirks 0x0000000200009810
[58533.257654] xhci_hcd 0000:39:00.0: xHCI Host Controller
[58533.257673] xhci_hcd 0000:39:00.0: new USB bus registered, assigned bus number 4
[58533.257689] xhci_hcd 0000:39:00.0: Host supports USB 3.1 Enhanced SuperSpeed
[58533.257826] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.13
[58533.257840] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[58533.257849] usb usb3: Product: xHCI Host Controller
[58533.257856] usb usb3: Manufacturer: Linux 6.13.0-rc1-00316-gb5f217084ab3 xhci-hcd
[58533.257863] usb usb3: SerialNumber: 0000:39:00.0
[58533.260044] hub 3-0:1.0: USB hub found
[58533.260204] hub 3-0:1.0: 2 ports detected
[58533.273745] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.13
[58533.273762] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[58533.273770] usb usb4: Product: xHCI Host Controller
[58533.273776] usb usb4: Manufacturer: Linux 6.13.0-rc1-00316-gb5f217084ab3 xhci-hcd
[58533.273784] usb usb4: SerialNumber: 0000:39:00.0
[58533.276414] hub 4-0:1.0: USB hub found
[58533.276474] hub 4-0:1.0: 2 ports detected
[58533.290199] pci_bus 0000:02: Allocating resources
[58533.290243] pcieport 0000:02:01.0: bridge window [io 0x1000-0x0fff] to [bus 04-38] add_size 1000
[58533.290258] pcieport 0000:02:02.0: bridge window [io 0x1000-0x0fff] to [bus 39] add_size 1000
[58533.290268] pcieport 0000:02:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 39] add_size 200000 add_align 100000
[58533.290282] pcieport 0000:01:00.0: bridge window [io 0x1000-0x0fff] to [bus 02-39] add_size 2000
[58533.290295] pcieport 0000:01:00.0: bridge window [io size 0x2000]: can't assign; no space
[58533.290302] pcieport 0000:01:00.0: bridge window [io size 0x2000]: failed to assign
[58533.290309] pcieport 0000:01:00.0: bridge window [io size 0x2000]: can't assign; no space
[58533.290315] pcieport 0000:01:00.0: bridge window [io size 0x2000]: failed to assign
[58533.290330] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[58533.290336] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[58533.290343] pcieport 0000:02:01.0: bridge window [io size 0x1000]: can't assign; no space
[58533.290349] pcieport 0000:02:01.0: bridge window [io size 0x1000]: failed to assign
[58533.290354] pcieport 0000:02:02.0: bridge window [io size 0x1000]: can't assign; no space
[58533.290360] pcieport 0000:02:02.0: bridge window [io size 0x1000]: failed to assign
[58533.290369] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[58533.290375] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[58533.290381] pcieport 0000:02:02.0: bridge window [io size 0x1000]: can't assign; no space
[58533.290387] pcieport 0000:02:02.0: bridge window [io size 0x1000]: failed to assign
[58533.290393] pcieport 0000:02:01.0: bridge window [io size 0x1000]: can't assign; no space
[58533.290398] pcieport 0000:02:01.0: bridge window [io size 0x1000]: failed to assign
[58533.326382] PM: suspend exit
[58533.356240] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin
[58533.356258] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111
[58533.525648] usb 3-1: new high-speed USB device number 2 using xhci_hcd
[58533.664170] usb 3-1: New USB device found, idVendor=2109, idProduct=2817, bcdDevice= 5.e3
[58533.664177] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[58533.664180] usb 3-1: Product: USB2.0 Hub
[58533.664182] usb 3-1: Manufacturer: VIA Labs, Inc.
[58533.664184] usb 3-1: SerialNumber: 000000000
[58533.665548] hub 3-1:1.0: USB hub found
[58533.668331] hub 3-1:1.0: 5 ports detected
[58533.714031] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin
[58533.739816] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported.
[58533.795128] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd
[58533.839304] usb 4-1: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 5.e3
[58533.839318] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[58533.839321] usb 4-1: Product: USB3.0 Hub
[58533.839324] usb 4-1: Manufacturer: VIA Labs, Inc.
[58533.839326] usb 4-1: SerialNumber: 000000000
[58533.843603] hub 4-1:1.0: USB hub found
[58533.843862] hub 4-1:1.0: 4 ports detected
[58534.393962] usb 3-1.1: new high-speed USB device number 3 using xhci_hcd
[58534.537975] usb 3-1.1: New USB device found, idVendor=2109, idProduct=2817, bcdDevice= 7.b4
[58534.537982] usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[58534.537984] usb 3-1.1: Product: USB2.0 Hub
[58534.537986] usb 3-1.1: Manufacturer: VIA Labs, Inc.
[58534.537988] usb 3-1.1: SerialNumber: 000000000
[58534.538969] hub 3-1.1:1.0: USB hub found
[58534.539121] hub 3-1.1:1.0: 4 ports detected
[58534.633731] usb 4-1.1: new SuperSpeed USB device number 3 using xhci_hcd
[58534.692227] usb 4-1.1: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 7.b4
[58534.692242] usb 4-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[58534.692245] usb 4-1.1: Product: USB3.0 Hub
[58534.692247] usb 4-1.1: Manufacturer: VIA Labs, Inc.
[58534.692249] usb 4-1.1: SerialNumber: 000000000
[58534.696380] hub 4-1.1:1.0: USB hub found
[58534.696629] hub 4-1.1:1.0: 4 ports detected
[58534.770006] usb 3-1.5: new high-speed USB device number 4 using xhci_hcd
[58534.863290] usb 3-1.5: New USB device found, idVendor=2109, idProduct=8817, bcdDevice= 0.01
[58534.863315] usb 3-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[58534.863322] usb 3-1.5: Product: USB Billboard Device
[58534.863329] usb 3-1.5: Manufacturer: VIA Labs, Inc.
[58534.863333] usb 3-1.5: SerialNumber: 0000000000000001
[58539.252023] wlp58s0: authenticate with 88:71:b1:81:93:1b (local address=9c:b6:d0:d1:6a:b1)
[58539.252055] wlp58s0: send auth to 88:71:b1:81:93:1b (try 1/3)
[58539.256000] wlp58s0: authenticated
[58539.258212] wlp58s0: associate with 88:71:b1:81:93:1b (try 1/3)
[58539.282970] wlp58s0: RX AssocResp from 88:71:b1:81:93:1b (capab=0x1011 status=0 aid=1)
[58539.286442] wlp58s0: associated
[58539.378007] wlp58s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 88:71:b1:81:93:1b
[58540.154043] xhci_hcd 0000:39:00.0: Timeout while waiting for setup device command
[58545.529916] xhci_hcd 0000:39:00.0: Timeout while waiting for setup device command
[58545.734679] usb 4-1.4: device not accepting address 4, error -62
[58546.465875] usb 3-1.1.3: new high-speed USB device number 5 using xhci_hcd
[58547.905989] usb 4-1.1.3: new SuperSpeed USB device number 6 using xhci_hcd
[58547.922864] usb 4-1.1.3: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=30.00
[58547.922875] usb 4-1.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=6
[58547.922889] usb 4-1.1.3: Product: USB 10/100/1000 LAN
[58547.922893] usb 4-1.1.3: Manufacturer: Realtek
[58547.922897] usb 4-1.1.3: SerialNumber: 000001
[58553.209984] xhci_hcd 0000:39:00.0: Timeout while waiting for setup device command
[58558.586008] xhci_hcd 0000:39:00.0: Timeout while waiting for setup device command
[58558.789847] usb 4-1.4: device not accepting address 7, error -62
[58559.522377] r8152-cfgselector 4-1.1.3: reset SuperSpeed USB device number 6 using xhci_hcd
[58559.592496] r8152 4-1.1.3:1.0 eth0: v1.12.13
[58559.739507] r8152 4-1.1.3:1.0 enx00e04ceabc41: renamed from eth0
[58563.659834] r8152 4-1.1.3:1.0 enx00e04ceabc41: carrier on
[58581.526345] usb 4-1.2: new SuperSpeed USB device number 9 using xhci_hcd
[58581.557461] usb 4-1.2: New USB device found, idVendor=0bda, idProduct=0409, bcdDevice= 1.41
[58581.557478] usb 4-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[58581.557486] usb 4-1.2: Product: 4-Port USB 3.0 Hub
[58581.557491] usb 4-1.2: Manufacturer: Generic
[58581.606921] hub 4-1.2:1.0: USB hub found
[58581.608317] hub 4-1.2:1.0: 2 ports detected
[58581.669645] usb 3-1.2: new high-speed USB device number 7 using xhci_hcd
[58581.824876] usb 3-1.2: New USB device found, idVendor=0bda, idProduct=5409, bcdDevice= 1.41
[58581.824895] usb 3-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[58581.824903] usb 3-1.2: Product: 4-Port USB 2.0 Hub
[58581.824909] usb 3-1.2: Manufacturer: Generic
[58581.827738] hub 3-1.2:1.0: USB hub found
[58581.829252] hub 3-1.2:1.0: 4 ports detected
[58582.125649] usb 3-1.2.3: new low-speed USB device number 8 using xhci_hcd
[58582.236990] usb 3-1.2.3: New USB device found, idVendor=413c, idProduct=2113, bcdDevice= 1.08
[58582.237013] usb 3-1.2.3: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[58582.237029] usb 3-1.2.3: Product: Dell KB216 Wired Keyboard
[58582.248879] input: Dell KB216 Wired Keyboard as /devices/pci0000:00/0000:00:1c.0/0000:01:00.0/0000:02:02.0/0000:39:00.0/usb3/3-1/3-1.2/3-1.2.3/3-1.2.3:1.0/0003:413C:2113.0007/input/input53
[58582.366130] hid-generic 0003:413C:2113.0007: input,hidraw2: USB HID v1.11 Keyboard [Dell KB216 Wired Keyboard] on usb-0000:39:00.0-1.2.3/input0
[58582.372299] input: Dell KB216 Wired Keyboard System Control as /devices/pci0000:00/0000:00:1c.0/0000:01:00.0/0000:02:02.0/0000:39:00.0/usb3/3-1/3-1.2/3-1.2.3/3-1.2.3:1.1/0003:413C:2113.0008/input/input54
[58582.426107] input: Dell KB216 Wired Keyboard Consumer Control as /devices/pci0000:00/0000:00:1c.0/0000:01:00.0/0000:02:02.0/0000:39:00.0/usb3/3-1/3-1.2/3-1.2.3/3-1.2.3:1.1/0003:413C:2113.0008/input/input55
[58582.426439] hid-generic 0003:413C:2113.0008: input,hidraw3: USB HID v1.11 Device [Dell KB216 Wired Keyboard] on usb-0000:39:00.0-1.2.3/input1
[58582.513666] usb 3-1.2.4: new low-speed USB device number 9 using xhci_hcd
[58582.623365] usb 3-1.2.4: New USB device found, idVendor=1bcf, idProduct=0005, bcdDevice= 0.14
[58582.623378] usb 3-1.2.4: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[58582.623381] usb 3-1.2.4: Product: USB Optical Mouse
[58582.632524] input: USB Optical Mouse as /devices/pci0000:00/0000:00:1c.0/0000:01:00.0/0000:02:02.0/0000:39:00.0/usb3/3-1/3-1.2/3-1.2.4/3-1.2.4:1.0/0003:1BCF:0005.0009/input/input56
[58582.632681] hid-generic 0003:1BCF:0005.0009: input,hidraw4: USB HID v1.10 Mouse [USB Optical Mouse] on usb-0000:39:00.0-1.2.4/input0
[58602.084728] usb 3-1: USB disconnect, device number 2
[58602.084744] usb 3-1.1: USB disconnect, device number 3
[58602.089976] usb 3-1.2: USB disconnect, device number 7
[58602.089990] usb 3-1.2.3: USB disconnect, device number 8
[58602.166547] xhci_hcd 0000:39:00.0: xHCI host controller not responding, assume dead
[58602.166604] xhci_hcd 0000:39:00.0: HC died; cleaning up
[58602.166664] r8152 4-1.1.3:1.0 enx00e04ceabc41: Stop submitting intr, status -108
[58602.236493] xhci_hcd 0000:39:00.0: remove, state 1
[58602.236501] usb usb4: USB disconnect, device number 1
[58602.277460] usb 4-1: USB disconnect, device number 2
[58602.277467] usb 4-1.1: USB disconnect, device number 3
[58602.277471] r8152-cfgselector 4-1.1.3: USB disconnect, device number 6
[58602.331236] usb 4-1.2: USB disconnect, device number 9
[58602.335410] xhci_hcd 0000:39:00.0: USB bus 4 deregistered
[58602.335429] xhci_hcd 0000:39:00.0: remove, state 1
[58602.335436] usb usb3: USB disconnect, device number 1
[58602.411354] usb 3-1.2.4: USB disconnect, device number 9
[58602.442655] usb 3-1.5: USB disconnect, device number 4
[58602.445304] xhci_hcd 0000:39:00.0: Host halt failed, -19
[58602.445315] xhci_hcd 0000:39:00.0: Host not accessible, reset failed.
[58602.445594] xhci_hcd 0000:39:00.0: USB bus 3 deregistered
[58602.466814] pci_bus 0000:02: Allocating resources
[58602.466845] pcieport 0000:02:01.0: bridge window [io 0x1000-0x0fff] to [bus 04-38] add_size 1000
[58602.466856] pcieport 0000:02:02.0: bridge window [io 0x1000-0x0fff] to [bus 39] add_size 1000
[58602.466863] pcieport 0000:02:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 39] add_size 200000 add_align 100000
[58602.466873] pcieport 0000:01:00.0: bridge window [io 0x1000-0x0fff] to [bus 02-39] add_size 2000
[58602.466883] pcieport 0000:01:00.0: bridge window [io size 0x2000]: can't assign; no space
[58602.466889] pcieport 0000:01:00.0: bridge window [io size 0x2000]: failed to assign
[58602.466895] pcieport 0000:01:00.0: bridge window [io size 0x2000]: can't assign; no space
[58602.466900] pcieport 0000:01:00.0: bridge window [io size 0x2000]: failed to assign
[58602.466911] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[58602.466916] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[58602.466922] pcieport 0000:02:01.0: bridge window [io size 0x1000]: can't assign; no space
[58602.466926] pcieport 0000:02:01.0: bridge window [io size 0x1000]: failed to assign
[58602.466931] pcieport 0000:02:02.0: bridge window [io size 0x1000]: can't assign; no space
[58602.466936] pcieport 0000:02:02.0: bridge window [io size 0x1000]: failed to assign
[58602.466944] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[58602.466949] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[58602.466954] pcieport 0000:02:02.0: bridge window [io size 0x1000]: can't assign; no space
[58602.466959] pcieport 0000:02:02.0: bridge window [io size 0x1000]: failed to assign
[58602.466963] pcieport 0000:02:01.0: bridge window [io size 0x1000]: can't assign; no space
[58602.466968] pcieport 0000:02:01.0: bridge window [io size 0x1000]: failed to assign
[58607.345890] pci 0000:39:00.0: [8086:15b5] type 00 class 0x0c0330 PCIe Endpoint
[58607.345924] pci 0000:39:00.0: BAR 0 [mem 0xd9f00000-0xd9f0ffff]
[58607.346018] pci 0000:39:00.0: enabling Extended Tags
[58607.346176] pci 0000:39:00.0: supports D1 D2
[58607.346178] pci 0000:39:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[58607.346309] pci 0000:39:00.0: 8.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x4 link at 0000:02:02.0 (capable of 31.504 Gb/s with 8.0 GT/s PCIe x4 link)
[58607.346614] pcieport 0000:02:02.0: ASPM: current common clock configuration is inconsistent, reconfiguring
[58607.346691] pci_bus 0000:02: Allocating resources
[58607.346711] pcieport 0000:02:01.0: bridge window [io 0x1000-0x0fff] to [bus 04-38] add_size 1000
[58607.346716] pcieport 0000:02:02.0: bridge window [io 0x1000-0x0fff] to [bus 39] add_size 1000
[58607.346719] pcieport 0000:02:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 39] add_size 200000 add_align 100000
[58607.346724] pcieport 0000:01:00.0: bridge window [io 0x1000-0x0fff] to [bus 02-39] add_size 2000
[58607.346728] pcieport 0000:01:00.0: bridge window [io size 0x2000]: can't assign; no space
[58607.346731] pcieport 0000:01:00.0: bridge window [io size 0x2000]: failed to assign
[58607.346733] pcieport 0000:01:00.0: bridge window [io size 0x2000]: can't assign; no space
[58607.346735] pcieport 0000:01:00.0: bridge window [io size 0x2000]: failed to assign
[58607.346740] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[58607.346743] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[58607.346745] pcieport 0000:02:01.0: bridge window [io size 0x1000]: can't assign; no space
[58607.346747] pcieport 0000:02:01.0: bridge window [io size 0x1000]: failed to assign
[58607.346748] pcieport 0000:02:02.0: bridge window [io size 0x1000]: can't assign; no space
[58607.346750] pcieport 0000:02:02.0: bridge window [io size 0x1000]: failed to assign
[58607.346754] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[58607.346756] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[58607.346758] pcieport 0000:02:02.0: bridge window [io size 0x1000]: can't assign; no space
[58607.346760] pcieport 0000:02:02.0: bridge window [io size 0x1000]: failed to assign
[58607.346762] pcieport 0000:02:01.0: bridge window [io size 0x1000]: can't assign; no space
[58607.346763] pcieport 0000:02:01.0: bridge window [io size 0x1000]: failed to assign
[58607.347096] xhci_hcd 0000:39:00.0: xHCI Host Controller
[58607.347105] xhci_hcd 0000:39:00.0: new USB bus registered, assigned bus number 3
[58607.348274] xhci_hcd 0000:39:00.0: hcc params 0x200077c1 hci version 0x110 quirks 0x0000000200009810
[58607.348850] xhci_hcd 0000:39:00.0: xHCI Host Controller
[58607.348859] xhci_hcd 0000:39:00.0: new USB bus registered, assigned bus number 4
[58607.348865] xhci_hcd 0000:39:00.0: Host supports USB 3.1 Enhanced SuperSpeed
[58607.348935] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.13
[58607.348941] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[58607.348945] usb usb3: Product: xHCI Host Controller
[58607.348948] usb usb3: Manufacturer: Linux 6.13.0-rc1-00316-gb5f217084ab3 xhci-hcd
[58607.348951] usb usb3: SerialNumber: 0000:39:00.0
[58607.349241] hub 3-0:1.0: USB hub found
[58607.349258] hub 3-0:1.0: 2 ports detected
[58607.350422] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.13
[58607.350427] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[58607.350430] usb usb4: Product: xHCI Host Controller
[58607.350432] usb usb4: Manufacturer: Linux 6.13.0-rc1-00316-gb5f217084ab3 xhci-hcd
[58607.350434] usb usb4: SerialNumber: 0000:39:00.0
[58607.350700] hub 4-0:1.0: USB hub found
[58607.350715] hub 4-0:1.0: 2 ports detected
[58607.597507] usb 3-1: new high-speed USB device number 2 using xhci_hcd
[58607.735831] usb 3-1: New USB device found, idVendor=2109, idProduct=2817, bcdDevice= 5.e3
[58607.735850] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[58607.735858] usb 3-1: Product: USB2.0 Hub
[58607.735864] usb 3-1: Manufacturer: VIA Labs, Inc.
[58607.735869] usb 3-1: SerialNumber: 000000000
[58607.738193] hub 3-1:1.0: USB hub found
[58607.738432] hub 3-1:1.0: 5 ports detected
[58607.861584] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd
[58607.906625] usb 4-1: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 5.e3
[58607.906665] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[58607.906674] usb 4-1: Product: USB3.0 Hub
[58607.906689] usb 4-1: Manufacturer: VIA Labs, Inc.
[58607.906694] usb 4-1: SerialNumber: 000000000
[58607.913185] hub 4-1:1.0: USB hub found
[58607.913558] hub 4-1:1.0: 4 ports detected
[58608.441439] usb 3-1.1: new high-speed USB device number 3 using xhci_hcd
[58608.580050] usb 3-1.1: New USB device found, idVendor=2109, idProduct=2817, bcdDevice= 7.b4
[58608.580076] usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[58608.580092] usb 3-1.1: Product: USB2.0 Hub
[58608.580098] usb 3-1.1: Manufacturer: VIA Labs, Inc.
[58608.580103] usb 3-1.1: SerialNumber: 000000000
[58608.582229] hub 3-1.1:1.0: USB hub found
[58608.582501] hub 3-1.1:1.0: 4 ports detected
[58608.676153] usb 4-1.1: new SuperSpeed USB device number 3 using xhci_hcd
[58608.735344] usb 4-1.1: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 7.b4
[58608.735369] usb 4-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[58608.735385] usb 4-1.1: Product: USB3.0 Hub
[58608.735390] usb 4-1.1: Manufacturer: VIA Labs, Inc.
[58608.735395] usb 4-1.1: SerialNumber: 000000000
[58608.785432] hub 4-1.1:1.0: USB hub found
[58608.785578] hub 4-1.1:1.0: 4 ports detected
[58608.853443] usb 3-1.2: new high-speed USB device number 4 using xhci_hcd
[58609.008852] usb 3-1.2: New USB device found, idVendor=0bda, idProduct=5409, bcdDevice= 1.41
[58609.008879] usb 3-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[58609.008886] usb 3-1.2: Product: 4-Port USB 2.0 Hub
[58609.008900] usb 3-1.2: Manufacturer: Generic
[58609.013464] hub 3-1.2:1.0: USB hub found
[58609.014805] hub 3-1.2:1.0: 4 ports detected
[58609.070688] usb 4-1.2: new SuperSpeed USB device number 4 using xhci_hcd
[58609.101854] usb 4-1.2: New USB device found, idVendor=0bda, idProduct=0409, bcdDevice= 1.41
[58609.101892] usb 4-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[58609.101900] usb 4-1.2: Product: 4-Port USB 3.0 Hub
[58609.101915] usb 4-1.2: Manufacturer: Generic
[58609.110175] hub 4-1.2:1.0: USB hub found
[58609.111619] hub 4-1.2:1.0: 2 ports detected
[58609.185536] usb 4-1.4: new SuperSpeed USB device number 5 using xhci_hcd
[58609.203900] usb 4-1.4: New USB device found, idVendor=058f, idProduct=8468, bcdDevice= 1.00
[58609.203924] usb 4-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[58609.203931] usb 4-1.4: Product: Mass Storage Device
[58609.203945] usb 4-1.4: Manufacturer: Generic
[58609.203950] usb 4-1.4: SerialNumber: 058F84688461
[58609.207650] usb-storage 4-1.4:1.0: USB Mass Storage device detected
[58609.208264] scsi host0: usb-storage 4-1.4:1.0
[58609.273571] usb 3-1.1.3: new high-speed USB device number 5 using xhci_hcd
[58610.021437] usb 3-1.2.3: new low-speed USB device number 6 using xhci_hcd
[58610.132650] usb 3-1.2.3: New USB device found, idVendor=413c, idProduct=2113, bcdDevice= 1.08
[58610.132667] usb 3-1.2.3: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[58610.132675] usb 3-1.2.3: Product: Dell KB216 Wired Keyboard
[58610.144764] input: Dell KB216 Wired Keyboard as /devices/pci0000:00/0000:00:1c.0/0000:01:00.0/0000:02:02.0/0000:39:00.0/usb3/3-1/3-1.2/3-1.2.3/3-1.2.3:1.0/0003:413C:2113.000A/input/input57
[58610.197677] usb 4-1.1.3: new SuperSpeed USB device number 6 using xhci_hcd
[58610.214633] usb 4-1.1.3: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=30.00
[58610.214656] usb 4-1.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=6
[58610.214672] usb 4-1.1.3: Product: USB 10/100/1000 LAN
[58610.214678] usb 4-1.1.3: Manufacturer: Realtek
[58610.214683] usb 4-1.1.3: SerialNumber: 000001
[58610.234881] scsi 0:0:0:0: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 6
[58610.236488] scsi 0:0:0:1: Direct-Access Generic- Micro SD/M2 1.08 PQ: 0 ANSI: 6
[58610.237333] sd 0:0:0:0: [sda] Media removed, stopped polling
[58610.238101] sd 0:0:0:1: [sdb] Media removed, stopped polling
[58610.238743] sd 0:0:0:0: [sda] Attached SCSI removable disk
[58610.240773] sd 0:0:0:1: [sdb] Attached SCSI removable disk
[58610.247625] hid-generic 0003:413C:2113.000A: input,hidraw2: USB HID v1.11 Keyboard [Dell KB216 Wired Keyboard] on usb-0000:39:00.0-1.2.3/input0
[58610.255127] input: Dell KB216 Wired Keyboard System Control as /devices/pci0000:00/0000:00:1c.0/0000:01:00.0/0000:02:02.0/0000:39:00.0/usb3/3-1/3-1.2/3-1.2.3/3-1.2.3:1.1/0003:413C:2113.000B/input/input58
[58610.285445] usb 3-1.5: new high-speed USB device number 7 using xhci_hcd
[58610.329590] input: Dell KB216 Wired Keyboard Consumer Control as /devices/pci0000:00/0000:00:1c.0/0000:01:00.0/0000:02:02.0/0000:39:00.0/usb3/3-1/3-1.2/3-1.2.3/3-1.2.3:1.1/0003:413C:2113.000B/input/input59
[58610.330726] hid-generic 0003:413C:2113.000B: input,hidraw3: USB HID v1.11 Device [Dell KB216 Wired Keyboard] on usb-0000:39:00.0-1.2.3/input1
[58610.378401] usb 3-1.5: New USB device found, idVendor=2109, idProduct=8817, bcdDevice= 0.01
[58610.378410] usb 3-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[58610.378414] usb 3-1.5: Product: USB Billboard Device
[58610.378416] usb 3-1.5: Manufacturer: VIA Labs, Inc.
[58610.378419] usb 3-1.5: SerialNumber: 0000000000000001
[58610.449780] r8152-cfgselector 4-1.1.3: reset SuperSpeed USB device number 6 using xhci_hcd
[58610.512350] r8152 4-1.1.3:1.0 eth0: v1.12.13
[58610.538133] usb 3-1.2.4: new low-speed USB device number 8 using xhci_hcd
[58610.662747] usb 3-1.2.4: New USB device found, idVendor=1bcf, idProduct=0005, bcdDevice= 0.14
[58610.662754] usb 3-1.2.4: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[58610.662756] usb 3-1.2.4: Product: USB Optical Mouse
[58610.676991] input: USB Optical Mouse as /devices/pci0000:00/0000:00:1c.0/0000:01:00.0/0000:02:02.0/0000:39:00.0/usb3/3-1/3-1.2/3-1.2.4/3-1.2.4:1.0/0003:1BCF:0005.000C/input/input60
[58610.677157] hid-generic 0003:1BCF:0005.000C: input,hidraw4: USB HID v1.10 Mouse [USB Optical Mouse] on usb-0000:39:00.0-1.2.4/input0
[58610.731958] r8152 4-1.1.3:1.0 enx00e04ceabc41: renamed from eth0
[58612.473802] pci_bus 0000:02: Allocating resources
[58612.473821] pcieport 0000:02:01.0: bridge window [io 0x1000-0x0fff] to [bus 04-38] add_size 1000
[58612.473825] pcieport 0000:02:02.0: bridge window [io 0x1000-0x0fff] to [bus 39] add_size 1000
[58612.473828] pcieport 0000:02:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 39] add_size 200000 add_align 100000
[58612.473831] pcieport 0000:01:00.0: bridge window [io 0x1000-0x0fff] to [bus 02-39] add_size 2000
[58612.473834] pcieport 0000:01:00.0: bridge window [io size 0x2000]: can't assign; no space
[58612.473836] pcieport 0000:01:00.0: bridge window [io size 0x2000]: failed to assign
[58612.473838] pcieport 0000:01:00.0: bridge window [io size 0x2000]: can't assign; no space
[58612.473839] pcieport 0000:01:00.0: bridge window [io size 0x2000]: failed to assign
[58612.473843] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[58612.473845] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[58612.473846] pcieport 0000:02:01.0: bridge window [io size 0x1000]: can't assign; no space
[58612.473847] pcieport 0000:02:01.0: bridge window [io size 0x1000]: failed to assign
[58612.473849] pcieport 0000:02:02.0: bridge window [io size 0x1000]: can't assign; no space
[58612.473850] pcieport 0000:02:02.0: bridge window [io size 0x1000]: failed to assign
[58612.473852] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space
[58612.473854] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign
[58612.473855] pcieport 0000:02:02.0: bridge window [io size 0x1000]: can't assign; no space
[58612.473856] pcieport 0000:02:02.0: bridge window [io size 0x1000]: failed to assign
[58612.473858] pcieport 0000:02:01.0: bridge window [io size 0x1000]: can't assign; no space
[58612.473859] pcieport 0000:02:01.0: bridge window [io size 0x1000]: failed to assign
[58613.237933] r8152 4-1.1.3:1.0 enx00e04ceabc41: carrier on
[58619.045812] wlp58s0: deauthenticating from 88:71:b1:81:93:1b by local choice (Reason: 3=DEAUTH_LEAVING)
More information about the ath10k
mailing list