ath10k-firmware: WCN3990: Add board file for the Qualcomm SDM845 MTP platform

[Dmitry Baryshkov]

On Wed, 13 Dec 2023 at 16:07, Kalle Valo <kvalo at kernel.org> wrote:
>
> Dmitry Baryshkov <dmitry.baryshkov at linaro.org> writes:
>
> > We'd like to ask for inclusion of the board file for the Qualcomm
> > SDM845 MTP board. It is a hardware development kit manufactured by
> > Qualcomm, using the Snapdragon SDM845 SoC and a variant of wcn3990
> > BT/WiFi chip.
> >
> > Following the questions from the ath10k wiki page:
> >
> > * description for what hardware this is
> > - It is SDM845-based platform
> > - It uses wcn3990 chip as a WiFi and BT radio
> > - For the reference:
> >
> > ath10k_snoc 18800000.wifi: qmi chip_id 0x30214 chip_family 0x4001
> > board_id 0x3f soc_id 0x40030001
> > ath10k_snoc 18800000.wifi: qmi fw_version 0x2009856b
> > fw_build_timestamp 2018-07-19 12:28 fw_build_id
> > QC_IMAGE_VERSION_STRING=WLAN.HL.2.0-01387-QCAHLSWMTPLZ-1
> > ath10k_snoc 18800000.wifi: failed to fetch board data for
> > bus=snoc,qmi-board-id=3f,qmi-chip-id=30214,variant=Qualcomm_sdm845mtp
> > from ath10k/WCN3990/hw1.0/board-2.bin
> > ath10k_snoc 18800000.wifi: wcn3990 hw1.0 target 0x00000008 chip_id
> > 0x00000000 sub 0000:0000
> > ath10k_snoc 18800000.wifi: kconfig debug 1 debugfs 0 tracing 0 dfs 0 testmode 0
> > ath10k_snoc 18800000.wifi: firmware ver  api 5 features
> > wowlan,mgmt-tx-by-reference,non-bmi crc32 b3d4b790
> > ath10k_snoc 18800000.wifi: htt-ver 3.53 wmi-op 4 htt-op 3 cal file
> > max-sta 32 raw 0 hwcrypto 1
> > ath10k_snoc 18800000.wifi: invalid MAC address; choosing random
> >
> > * origin of the board file
> >   - This file comes from the firmware package provided by Thundercomm for
> > the RB3 platform (also sdm845-based), cross-checked to be the same as
> > the file provided together with the sdm845-mtp board.
> >
> > * ids to be used with the board file
> >
> > bus=snoc,qmi-board-id=3f,qmi-chip-id=30214,variant=Qualcomm_sdm845mtp
> >
> > Note, the device comes with the board_id not changed from 0xff.
> > Following the example of existing boards we are adding the
> > calibration variant.
> >
> > * md5sum of each new board file to add
> >
> > $ md5sum *
> > c1f5ff1660cf6dcd74bff7b41c9e693f
> > bus=snoc,qmi-board-id=3f,qmi-chip-id=30214,variant=Qualcomm_sdm845mtp.bin
> >
> > $ sha256sum *
> > 8b250ac1bea81825cc6f4a70105dea89b0952340a9c77a8ab37e99cbfa63e53d
> > bus=snoc,qmi-board-id=3f,qmi-chip-id=30214,variant=Qualcomm_sdm845mtp.bin
>
> Thanks. The attachment filename was wrong so I added it manually, please
> check:
>
> https://github.com/kvalo/ath10k-firmware/commit/77c5345a8420d002de9ee6b7180d465f94535186

Looks correct, thank you! Please excuse me, I completely forgot about
the file name.

>
> New:
> bus=snoc,qmi-board-id=3f,qmi-chip-id=30214,variant=Qualcomm_sdm845mtp
>
> Changed:
>
>
> Deleted:
>
> 1 board image(s) added, 0 changed, 0 deleted, 27 in total


-- 
With best wishes
Dmitry