[PATCH v3] wifi: ath10k: Add WLAN firmware image version info into smem
Youghandhar Chintala (Temp)
quic_youghand at quicinc.com
Thu Nov 17 09:54:31 PST 2022
On 11/12/2022 1:53 AM, Bjorn Andersson wrote:
> On Fri, Nov 11, 2022 at 05:12:35PM +0530, Youghandhar Chintala wrote:
>
> Can you please change the subject to:
> wifi: ath10k: Store WLAN firmware version in SMEM image table
>
>> In a SoC based solution, it would be useful to know the versions of the
>> various binary firmware blobs the system is running on. On a QCOM based
>> SoC, this info can be obtained from socinfo debugfs infrastructure. For
>> this to work, respective subsystem drivers have to export the firmware
>> version information to an SMEM based version information table.
>>
>> Having firmware version information at one place will help quickly
>> figure out the firmware versions of various subsystems on the device
>> instead of going through builds/logs in an event of a system crash.
>>
>> Fill WLAN firmware version information in SMEM version table to be
>> printed as part of socinfo debugfs infrastructure on a Qualcomm based
>> SoC.
>>
>> This change is applicable only for WCN399X targets.
>>
> Why is this restricted to WCN399X? Is it not the case that it only
> relates to the SNOC/QMI-based implementation? Perhaps that's the same
> thing, but if so I think the comment could be improved.
>
>> Example:
>> cat /sys/kernel/debug/qcom_socinfo/cnss/name
>> QC_IMAGE_VERSION_STRING=WLAN.HL.3.2.2.c10-00754-QCAHLSWMTPL-1
>>
>> Reported-by: kernel test robot <lkp at intel.com>
> I don't think that kernel test robot reported the lack of this feature.
>
>> Tested-on: WCN3990 hw1.0 SNOC WLAN.HL.3.2.2.c10-00754-QCAHLSWMTPL-1
>>
>> Signed-off-by: Youghandhar Chintala <quic_youghand at quicinc.com>
>> ---
>> Changes from v2:
>> - Removed blank line between trailers
>> - Changed memcpy to strscpy
>> - Removed version_string_size
>> - Added new condition fw_build_id against max length
>> - Added depends on QCOM_SMEM for ath10k_snoc
>> ---
>> drivers/net/wireless/ath/ath10k/Kconfig | 1 +
>> drivers/net/wireless/ath/ath10k/qmi.c | 34 +++++++++++++++++++++++++
>> 2 files changed, 35 insertions(+)
>>
>> diff --git a/drivers/net/wireless/ath/ath10k/Kconfig b/drivers/net/wireless/ath/ath10k/Kconfig
>> index ca007b800f75..e6ea884cafc1 100644
>> --- a/drivers/net/wireless/ath/ath10k/Kconfig
>> +++ b/drivers/net/wireless/ath/ath10k/Kconfig
>> @@ -44,6 +44,7 @@ config ATH10K_SNOC
>> tristate "Qualcomm ath10k SNOC support"
>> depends on ATH10K
>> depends on ARCH_QCOM || COMPILE_TEST
>> + depends on QCOM_SMEM
>> select QCOM_SCM
>> select QCOM_QMI_HELPERS
>> help
>> diff --git a/drivers/net/wireless/ath/ath10k/qmi.c b/drivers/net/wireless/ath/ath10k/qmi.c
>> index 66cb7a1e628a..6c3ddad26417 100644
>> --- a/drivers/net/wireless/ath/ath10k/qmi.c
>> +++ b/drivers/net/wireless/ath/ath10k/qmi.c
>> @@ -14,6 +14,7 @@
>> #include <linux/net.h>
>> #include <linux/platform_device.h>
>> #include <linux/qcom_scm.h>
>> +#include <linux/soc/qcom/smem.h>
>> #include <linux/string.h>
>> #include <net/sock.h>
>>
>> @@ -22,6 +23,8 @@
>>
>> #define ATH10K_QMI_CLIENT_ID 0x4b4e454c
>> #define ATH10K_QMI_TIMEOUT 30
>> +#define ATH10K_SMEM_IMAGE_VERSION_TABLE 469
> This isn't the ATH10K SMEM_IMAGE_VERSION_TABLE, it's the one and only
> SMEM_IMAGE_VERSION_TABLE. As that is defined in socinfo.c, you can
> use the same define here.
>
>> +#define ATH10K_SMEM_IMAGE_TABLE_CNSS_INDEX 13
> SMEM_IMAGE_TABLE_CNSS_INDEX
>
>>
>> static int ath10k_qmi_map_msa_permission(struct ath10k_qmi *qmi,
>> struct ath10k_msa_mem_info *mem_info)
>> @@ -536,6 +539,35 @@ int ath10k_qmi_wlan_disable(struct ath10k *ar)
>> return ath10k_qmi_mode_send_sync_msg(ar, QMI_WLFW_OFF_V01);
>> }
>>
>> +static void ath10k_qmi_add_wlan_ver_smem(struct ath10k *ar, const char *fw_build_id)
>> +{
>> + u8 *smem_table_ptr;
> I don't think "smem" or "ptr" adds any value in this variable name.
> "table" should be sufficient.
>
>> + size_t smem_block_size;
> This is the "smem_item_size".
>
>> + const u32 smem_img_idx_wlan = ATH10K_SMEM_IMAGE_TABLE_CNSS_INDEX * 128;
> Why not just "offset"?
>
> #define SMEM_IMAGE_VERSION_ENTRY_SIZE 128
>
> Instead of writing 128 here and abusing MAX_BUILD_ID_LEN below.
>
>> +
>> + smem_table_ptr = qcom_smem_get(QCOM_SMEM_HOST_ANY,
>> + ATH10K_SMEM_IMAGE_VERSION_TABLE,
>> + &smem_block_size);
>> + if (IS_ERR(smem_table_ptr)) {
>> + ath10k_dbg(ar, ATH10K_DBG_QMI,
>> + "smem image version table not found\n");
>> + return;
>> + }
>> +
>> + if (smem_img_idx_wlan + MAX_BUILD_ID_LEN > smem_block_size) {
>> + ath10k_dbg(ar, ATH10K_DBG_QMI, "smem block size too small: %zu\n",
>> + smem_block_size);
> You found a IMAGE_VERSION_TABLE, but it's smaller than expected. That
> sounds like an ath10k_err() to me.
>
>> + return;
>> + }
>> +
>> + if (strlen(fw_build_id) > MAX_BUILD_ID_LEN) {
> Is this really a concern, if the string is too long strscpy() below will
> truncate it.
>
>> + ath10k_dbg(ar, ATH10K_DBG_QMI, "fw_build_id length more than max length\n");
>> + return;
>> + }
>> +
>> + strscpy(smem_table_ptr + smem_img_idx_wlan, fw_build_id, MAX_BUILD_ID_LEN);
> MAX_BUILD_ID_LEN is the length of fw_build_id, which is 128.
>
> But the memory you're writing to is defined as:
>
> struct smem_image_version {
> char name[SMEM_IMAGE_VERSION_NAME_SIZE];
> char variant[SMEM_IMAGE_VERSION_VARIANT_SIZE];
> char pad;
> char oem[SMEM_IMAGE_VERSION_OEM_SIZE];
> };
>
> With SMEM_IMAGE_VERSION_NAME_SIZE being 75.
>
>> +}
>> +
>> static int ath10k_qmi_cap_send_sync_msg(struct ath10k_qmi *qmi)
>> {
>> struct wlfw_cap_resp_msg_v01 *resp;
>> @@ -606,6 +638,8 @@ static int ath10k_qmi_cap_send_sync_msg(struct ath10k_qmi *qmi)
>> qmi->fw_version, qmi->fw_build_timestamp, qmi->fw_build_id);
>> }
>>
>> + ath10k_qmi_add_wlan_ver_smem(ar, qmi->fw_build_id);
> qmi->fw_build_id is only valid if resp->fw_build_id_valid is set...
>
> Regards,
> Bjorn
>
>> +
>> kfree(resp);
>> return 0;
>>
>> --
>> 2.38.0
Thank you Andersson. I will address all your comments in my next version
of patch.
More information about the ath10k
mailing list