ath10k-firmware: QCA4019 hw1.0 + QCA9888 hw2.0: add GL.iNet GL-B2200 specific board files

[Enrico Mioso]

Hello all!!

This is my first submission, so I may need some patience to get this right! :) :)

I would like to add some board files for a device that was added a while ago to OpenWRt - the GL.iNet GL-B2200 mesh router. The device sports 3 Wi-Fi interfacesand currently uses the three board files I am submitting.

* Hardware description:

This device seems based on IPQ4019 / AP-DK04.1-C3.
Three radios are used:
- one QCA4019 radio is used for 2.4 GHZ operation
- one QCA4019 radio is used for 5 GHZ for operating on lower part of 5 GHZ spectrum
- a QCA9888V2 interface connected over PCI-E to operate on higher part of the 5 GHZ spectrum

* origin of the board files:

These board files where provided by the manifacturer, who provided the original patch to support the device.
However, the board file for the QCA9888v2 hardware needed to be fixed/re-packaged when the board DTS was modified to switch to pre-calibration.

* ids to be used with the board files

+ bus=ahb,bmi-chip-id=0,bmi-board-id=20,variant=GL-B2200
SHA256: bffec2b99a98ff1d2f842217ef0478c1714f9ea7f42791c2b2f47d9ed1342db6
+ bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=GL-B2200
SHA256: 952e47bae3c8b949926b75c8471fb60dffcceefec5914c0d646a8b361df79d05
+ bus=pci,vendor=168c,device=0056,subsystem-vendor=0000,subsystem-device=0000,variant=GL-B2200
SHA256: 7016cac25e5d35cf037f2f6aa63c03bd124fb521ec40c7843eb9d8424afa1a20

* attached files:

The names of the files are equal to the ID strings in the board-2.bin files, minus the .bin extension of course.

Kind regards,

Enrico
-------------- next part --------------
A non-text attachment was scrubbed...
Name: bus=pci,vendor=168c,device=0056,subsystem-vendor=0000,subsystem-device=0000,variant=GL-B2200.bin
Type: application/octet-stream
Size: 12064 bytes
Desc: 
URL: <http://lists.infradead.org/pipermail/ath10k/attachments/20220502/2dedbfce/attachment-0003.bin>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: bus=ahb,bmi-chip-id=0,bmi-board-id=20,variant=GL-B2200.bin
Type: application/octet-stream
Size: 12064 bytes
Desc: 
URL: <http://lists.infradead.org/pipermail/ath10k/attachments/20220502/2dedbfce/attachment-0004.bin>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=GL-B2200.bin
Type: application/octet-stream
Size: 12064 bytes
Desc: 
URL: <http://lists.infradead.org/pipermail/ath10k/attachments/20220502/2dedbfce/attachment-0005.bin>