ath10k-firmware: QCA4019 hw1.0: Add Qxwlan E2600AC specific BDFs
kvalo at kernel.org
Fri Jan 21 07:08:04 PST 2022
"张鹏" <1805692831 at qq.com> writes:
> Our motherboard has been modified once, and the latest baord file is attached.
> For the questions from the wiki page:
> * description for what hardware this is:
> - it is a IPQ4018 based board (AP-DK07-C1)
> - one QCA40xx radio is used as 2.4/5 GHz radio
> - one QCA40xx radio is used as 5GHz radio
> * origin of the board file (did you create it yourself or where you
> - The board file(s) where extracted from the Qxwlan firmware.
> - The files in this email are:
> * board_wifi0_2g.bin
> * board_wifi0_5g.bin
> * board_wifi1_5g.bin
> * ids to be used with the board file (ATH10K_BD_IE_BOARD_NAME in ath10k)
> - QCA4019 hw1.0
> + bus=ahb,bmi-chip-id=0,bmi-board-id=28,variant=Qxwlan-E2600AC
> + bus=ahb,bmi-chip-id=0,bmi-board-id=29,variant=Qxwlan-E2600AC
> + bus=ahb,bmi-chip-id=0,bmi-board-id=30,variant=Qxwlan-E2600AC
> * attach the actual board file (board.bin)
> - The name of the files are equal to the id string in the board-2.bin
> (minus the ".bin")
[2. application/octet-stream; board_wifi0_2g.bin]...
[3. application/octet-stream; board_wifi0_5g.bin]...
[4. application/octet-stream; board_wifi1_5g.bin]...
The attached filenames have wrong names which will break my script. They
should use the exact id to be used within board-2.bin (plus .bin in the
end), for example
More info in the wiki:
More information about the ath10k