[v2] ath10k-firmware: QCA9888 hw1.0: Add Linksys MR8300 V1.0 specific BDFs

[Kalle Valo]

Hans Geiblinger <cybrnook2002 at yahoo.com> writes:

> The support for this device is currently being added into OpenWrt. This AP requires 
> two special BDFs to get the Wi-Fi PHYs working (correctly).
>
>
> * description for what hardware this is:
>    - it is a QCA9888 based radio used for 5Ghz
>
>
> * origin of the board file
>    - boarddata files were taken from OEM Linksys FW_MR8300_1.1.7.201281_prod.img
>
>
> * ids to be used with the board file
>    - QCA9888 hw1.0
>      + bus=pci,bmi-chip-id=0,bmi-board-id=23,variant=linksys-mr8300-v0-fcc
>      MD5: 1f263c52e7862bccab6fd6551092077c
>
>
> * attach the actual board file
>    - The name of the files are equal to the id string in the
> board-2.bin (minus the ".bin")

Thanks, added to QCA9984/hw1.0/board-2.bin:

New:
bus=pci,bmi-chip-id=0,bmi-board-id=23,variant=linksys-mr8300-v0-fcc

Changed:


Deleted:

1 board image(s) added, 0 changed, 0 deleted, 19 in total

https://github.com/kvalo/ath10k-firmware/commit/c0b61963e3ed79cb3d95d915dbdde1fd21ef3cf9

-- 
https://patchwork.kernel.org/project/linux-wireless/list/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches