ath10k-firmware: QCA9888 hw2.0: Add EnGenius EAP2200 specific BDFs
Kalle Valo
kvalo at kernel.org
Fri Jan 21 06:01:39 PST 2022
<steven.lin at senao.com> writes:
> The support for this device was added a while ago to OpenWrt. This AP
> requires two special BDFs to get the Wi-Fi PHYs working (correctly).
> The bmi-board-id='s would clash with one of the the IPQ401X AP-DK
> boards because QCA doesn't provide special IDs for customers and seems
> to use the AP-DK board-ids in the wifi firmware to change its
> behavior.
>
> Now to the questions from the wiki page [1]:
>
> * description for what hardware this is:
> - it is a IPQ4019 based board
> - one QCA4019 radio is used as 2.4GHz radio
> - one QCA4019 radio is used as 5GHz radio
> - one QCA9888 radio is used as 5GHz radio
>
> * origin of the board file (did you create it yourself or where you downloaded)
> - taken from stock firmware image
>
> * ids to be used with the board file (ATH10K_BD_IE_BOARD_NAME in ath10k)
> - QCA9888 hw2.0
>
> md5sum of each new board file to add
>
> + bus=pci,bmi-chip-id=0,bmi-board-id=16,variant=EnGenius-EAP2200
> md5sum: 271e88642c141a58e115819de756994d
Thanks, added to QCA9888/hw2.0/board-2.bin:
New:
bus=pci,bmi-chip-id=0,bmi-board-id=16,variant=EnGenius-EAP2200
Changed:
Deleted:
1 board image(s) added, 0 changed, 0 deleted, 8 in total
https://github.com/kvalo/ath10k-firmware/commit/7ac0eb3dec0a823e06ea6de0baf5043cb8100ae2
--
https://patchwork.kernel.org/project/linux-wireless/list/
https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
More information about the ath10k
mailing list