QCA4019 hw1.0: Add P&W R619AC specific BDFs

[Kalle Valo]

<gowhdok at mailfence.com> writes:

> Hello, 
>
> This is the board files for P&W R619ac, a dual-band wireless router with an IPQ4019 inside.
>
> Relevant pull request on OpenWrt: https://github.com/openwrt/openwrt/pull/3691
>
> The boardfiles are extracted from the stock firmware:
> /lib/firmware/IPQ4019/hw.1/boarddata_0.bin
> /lib/firmware/IPQ4019/hw.1/boarddata_1.bin
>
> The MD5 hashes are consistent with the ones included in the pull request.
>
> ids to be used with the board file (ATH10K_BD_IE_BOARD_NAME in ath10k):
>   - QCA4019 hw1.0
> 	BoardNames[0]: 'bus=ahb,bmi-chip-id=0,bmi-board-id=16,variant=P&W R619AC'
> 	BoardMD5[0]: 05f6d61550d5ba8a0626fb7fa63703fe
>
> 	BoardNames[1]: 'bus=ahb,bmi-chip-id=0,bmi-board-id=17,variant=P&W R619AC'
> 	BoardMD5[1]: 9265da348a1294c326cd0156fd92d0b5
>
> Boardfiles are attached with the appropriate names. You may substitute the & and space with something else saner if they prove to be problematic.

I see that variant has a space in it, does that work it correctly? My
original idea was that spaces would not be allowed, but didn't realise
to add a check for that.

-- 
https://patchwork.kernel.org/project/linux-wireless/list/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches