ath10k-firmware: QCA4019 hw1.0: Add EnGenius EMR5000 specific BDFs

[Kalle Valo]

<frank.shen at senao.com> writes:

> Hi,
>
> The support for this device was added a while ago to OpenWrt. This AP
> requires two special BDFs to get the Wi-Fi PHYs working (correctly).
> The bmi-board-id='s would clash with one of the the IPQ401X AP-DK
> boards because QCA doesn't provide special IDs for customers and seems
> to use the AP-DK board-ids in the wifi firmware to change its
> behavior. This request contains the two files for QCA4019. The QCA9888
> one will be submitted in a different request.
>
> Now to the questions from the wiki page [1]:
>
> l       description for what hardware this is:
> -       it is a IPQ4019 based board
> -       one QCA4019 radio is used as 2.4GHz radio
> -       one QCA4019 radio is used as 5GHz radio
> -       an additional QCA9888 5GHz radio is attached via PCI
>
> l       origin of the board file (did you create it yourself or where you downloaded)
> -       taken from stock firmware image
>
> l       ids to be used with the board file (ATH10K_BD_IE_BOARD_NAME in ath10k)
> -       QCA4019 hw1.0
>
> md5sum of each new board file to add
> + bus=ahb,bmi-chip-id=0,bmi-board-id=20,variant=EnGenius-EMR5000
> md5sum: e4e0c9bc1482b03b8240817b5918666c
> + bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=EnGenius-EMR5000
> md5sum: a4e9856757014f4591d40ce93bab3e4f

Thanks, added to QCA4019/hw1.0/board-2.bin:

New:
bus=ahb,bmi-chip-id=0,bmi-board-id=20,variant=EnGenius-EMR5000
bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=EnGenius-EMR5000

Changed:


Deleted:

2 board image(s) added, 0 changed, 0 deleted, 62 in total

https://github.com/kvalo/ath10k-firmware/commit/8f150f4a3d52415b95fbbfead8dcaff458b80332

-- 
https://patchwork.kernel.org/project/linux-wireless/list/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches