ath10k-firmware: QCA4019 hw1.0: Add EnGenius ENH1350EXT specific BDFs

Kalle Valo kvalo at
Fri Jan 21 05:23:30 PST 2022

<GH.Lin at> writes:

> The support for this device was added a while ago to OpenWrt. This AP
> requires two special BDFs to get the Wi-Fi PHYs working (correctly).
> The bmi-board-id='s would clash with one of the IPQ401X AP-DK boards
> because QCA doesn't provide special IDs for customers and seems to use
> the AP-DK board-ids in the wifi firmware to change its behavior.
> Now to the questions from the wiki page [1]:
> l       description for what hardware this is:
> -       It is an IPQ4018 based board.
> -       One QCA40xx radio is used as 2.4GHz radio
> -       One QCA40xx radio is used as 5GHz radio
> l       origin of the board file (did you create it yourself or where you downloaded)
> -       Taken from stock firmware image
> l       ids to be used with the board file (ATH10K_BD_IE_BOARD_NAME in ath10k)
> -       QCA4019 hw1.0
> a7bfd8557e29620190eee3a34537b8f6 
> bus=ahb,bmi-chip-id=0,bmi-board-id=16,variant=EnGenius-ENH1350EXT.bin
> 7bb7e9ab117c1a560dc3259f30bf5081 
> bus=ahb,bmi-chip-id=0,bmi-board-id=17,variant=EnGenius-ENH1350EXT.bin

Thanks, added to QCA4019/hw1.0/board-2.bin:




2 board image(s) added, 0 changed, 0 deleted, 60 in total


More information about the ath10k mailing list