ath10k-firmware: QCA9888 hw2.0: Add Linksys WHW03V2 specific BDFs

[Vincent Tremblay]

Hi,

This is a set of files for the Linksys WHW03V2 that are currently
missing from the repository.

*  description for what hardware this is:

  - it is a IPQ4019 based board
  - QCA9888 V2 interface connected over PCI-E to operate on higher
part of the 5 GHZ spectrum

* origin of the board file (did you create it yourself or where you
  downloaded):

  They were extracted from the vendor firmware (version 2.1.19.209783).
  The files can be found in the folder "/lib/firmware/QCA9888/v2/FCC".

* ids to be used with the board file (ATH10K_BD_IE_BOARD_NAME in ath10k):

bus=pci,bmi-chip-id=0,bmi-board-id=23,variant=linksys-whw03v2.bin
md5sum: fde89e0dace1652566d96fb9c83b1c61

* attach the actual board file (board.bin):

  - The name of the files are equal to the id string in the board-2.bin
    (minus the ".bin")

Regards,
Vincent Tremblay
-------------- next part --------------
A non-text attachment was scrubbed...
Name: bus=pci,bmi-chip-id=0,bmi-board-id=23,variant=linksys-whw03v2.bin
Type: application/octet-stream
Size: 12064 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/ath10k/attachments/20221220/3f9a250d/attachment.bin>