ath10k-firmware: QCA4019: hw1.0: Add Google Wifi BDFs
kvalo at kernel.org
Wed Apr 13 02:05:54 PDT 2022
Brian Norris <computersforpeace at gmail.com> writes:
> OpenWrt support for Google Wifi is under review, so I'd like to push the BDFs
> into the mainline board-2.bin.
> Per the wiki :
> * description for what hardware this is
> - IPQ4019-based router, with two QCA4019 radios -- one for 2.4GHz (BMI board
> ID 16) and one for 5GHz (BMI board ID 21)
> - The Google Wifi product (notably, this is different than the Nest Wifi)
> was originally released in 2016, with a codename "Gale". It was refreshed
> in 2020 with near-identical hardware , using the same OS but a new BDF
> and new codename ("Breeze"). I include both Gale and Breeze BDFs but have
> only tested the former.
> * origin of the board file (did you create it yourself or where you
> - Pulled from the factory device filesystem (version R89-13729.57.27), which
> supports both the "Gale" and the (very similar) "Breeze" variants
> * ids to be used with the board file (ATH10K_BD_IE_BOARD_NAME in ath10k) +
> md5sum of each new board file to add
> - QCA4019 hw1.0
> BoardNames: 'bus=ahb,bmi-chip-id=0,bmi-board-id=16,variant=GO_GALE'
> BoardMD5: ea35e78c88a8571201da8b75edc9b881
> BoardNames: 'bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=GO_GALE'
> BoardMD5: 44cbc4ca6cb7141ba4249615f7065582
> BoardNames: 'bus=ahb,bmi-chip-id=0,bmi-board-id=16,variant=GO_BREEZE'
> BoardMD5: b4ac055b3ab67d5a6f5607a96af39a1f
> BoardNames: 'bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=GO_BREEZE'
> BoardMD5: 8b26cb285032314247304114b8ac50e7
> Variant naming scheme reflects that used by other Google projects -- using a
> GO(ogle) prefix, an underscore (_), and the project code name, all in caps.
> Attached filenames match the IDs above, with a '.bin' suffix appended.
Thanks, added to QCA4019/hw1.0/board-2.bin:
4 board image(s) added, 0 changed, 0 deleted, 93 in total
More information about the ath10k