[v2] ath10k-firmware: QCA9888 hw1.0: Add Linksys MR8300 V1.0 specific BDFs
kvalo at kernel.org
Wed Apr 13 02:02:07 PDT 2022
Christian Lamparter <chunkeey at gmail.com> writes:
> On 21/01/2022 15:09, Kalle Valo wrote:
>> Hans Geiblinger <cybrnook2002 at yahoo.com> writes:
>>> The support for this device is currently being added into OpenWrt. This AP requires
>>> two special BDFs to get the Wi-Fi PHYs working (correctly).
>>> * description for what hardware this is:
>>> - it is a QCA9888 based radio used for 5Ghz
>>> * origin of the board file
>>> - boarddata files were taken from OEM Linksys FW_MR8300_126.96.36.199281_prod.img
>>> * ids to be used with the board file
>>> - QCA9888 hw1.0
>>> + bus=pci,bmi-chip-id=0,bmi-board-id=23,variant=linksys-mr8300-v0-fcc
>>> MD5: 1f263c52e7862bccab6fd6551092077c
>>> * attach the actual board file
>>> - The name of the files are equal to the id string in the
>>> board-2.bin (minus the ".bin")
>> Thanks, added to QCA9984/hw1.0/board-2.bin:
> Oh... I just noticed. I think this got misplaced into
> QCA9984's board-2.bin. But this was for the QCA9888(v2). :(
Oh, sorry about that. Very good that you noticed it! I still manually
choose the directory so mistakes can happen.
BTW, the subject should have hw2.0 instead of hw1.0.
> Well, at least there shouldn't be any conflicts.
> Should I resend the Linksys MR8300's board files and
> add that as a note for your next round?
No need to resend, I fixed it manually now. Please double check:
More information about the ath10k