[PATCH RFC 2/3] ath10k: turn rawmode into frame_mode

[Sergey Ryazanov]

Turn boolean rawmode module param into integer frame_mode param that
contains value from ath10k_hw_txrx_mode enum. As earlier the default
param value is non-RAW (native Wi-Fi) encapsulation. The param name
is selected to be consistent with the similar ath11k param.

This is a preparation step for upcoming encapsulation offloading
support.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a at gmail.com>
---
 drivers/net/wireless/ath/ath10k/core.c | 11 +++++++----
 drivers/net/wireless/ath/ath10k/core.h |  1 +
 2 files changed, 8 insertions(+), 4 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
index 2092bfd02cd1..b74b6f5a7178 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -33,9 +33,11 @@ EXPORT_SYMBOL(ath10k_debug_mask);
 static unsigned int ath10k_cryptmode_param;
 static bool uart_print;
 static bool skip_otp;
-static bool rawmode;
 static bool fw_diag_log;
 
+/* frame mode values are mapped as per enum ath10k_hw_txrx_mode */
+unsigned int ath10k_frame_mode = ATH10K_HW_TXRX_NATIVE_WIFI;
+
 unsigned long ath10k_coredump_mask = BIT(ATH10K_FW_CRASH_DUMP_REGISTERS) |
 				     BIT(ATH10K_FW_CRASH_DUMP_CE_DATA);
 
@@ -44,15 +46,16 @@ module_param_named(debug_mask, ath10k_debug_mask, uint, 0644);
 module_param_named(cryptmode, ath10k_cryptmode_param, uint, 0644);
 module_param(uart_print, bool, 0644);
 module_param(skip_otp, bool, 0644);
-module_param(rawmode, bool, 0644);
 module_param(fw_diag_log, bool, 0644);
+module_param_named(frame_mode, ath10k_frame_mode, uint, 0644);
 module_param_named(coredump_mask, ath10k_coredump_mask, ulong, 0444);
 
 MODULE_PARM_DESC(debug_mask, "Debugging mask");
 MODULE_PARM_DESC(uart_print, "Uart target debugging");
 MODULE_PARM_DESC(skip_otp, "Skip otp failure for calibration in testmode");
 MODULE_PARM_DESC(cryptmode, "Crypto mode: 0-hardware, 1-software");
-MODULE_PARM_DESC(rawmode, "Use raw 802.11 frame datapath");
+MODULE_PARM_DESC(frame_mode,
+		 "Datapath frame mode (0: raw, 1: native wifi (default))");
 MODULE_PARM_DESC(coredump_mask, "Bitfield of what to include in firmware crash file");
 MODULE_PARM_DESC(fw_diag_log, "Diag based fw log debugging");
 
@@ -2588,7 +2591,7 @@ static int ath10k_core_init_firmware_features(struct ath10k *ar)
 	ar->htt.max_num_amsdu = ATH10K_HTT_MAX_NUM_AMSDU_DEFAULT;
 	ar->htt.max_num_ampdu = ATH10K_HTT_MAX_NUM_AMPDU_DEFAULT;
 
-	if (rawmode) {
+	if (ath10k_frame_mode == ATH10K_HW_TXRX_RAW) {
 		if (!test_bit(ATH10K_FW_FEATURE_RAW_MODE_SUPPORT,
 			      fw_file->fw_features)) {
 			ath10k_err(ar, "rawmode = 1 requires support from firmware");
diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h
index 9f6680b3be0a..a27d450bbeb8 100644
--- a/drivers/net/wireless/ath/ath10k/core.h
+++ b/drivers/net/wireless/ath/ath10k/core.h
@@ -1317,6 +1317,7 @@ static inline bool ath10k_peer_stats_enabled(struct ath10k *ar)
 	return false;
 }
 
+extern unsigned int ath10k_frame_mode;
 extern unsigned long ath10k_coredump_mask;
 
 void ath10k_core_napi_sync_disable(struct ath10k *ar);
-- 
2.34.1