[PATCH v1] ath10k: fetch (pre-)calibration data via nvmem subsystem
Christian Lamparter
chunkeey at gmail.com
Fri Oct 15 13:10:27 PDT 2021
On most embedded ath10k devices (like range extenders,
routers, accesspoints, ...) the calibration data is
stored in a easily accessible MTD partitions named
"ART", "caldata", "calibration", etc...
Since commit 4b361cfa8624 ("mtd: core: add OTP nvmem provider support"):
MTD partitions and portions of them can be specified
as potential nvmem-cells which are accessible through
the nvmem subsystem.
This feature - together with an nvmem cell definition either
in the platform data or via device-tree allows drivers to get
the (pre-)calibration data which is required for initializing
the WIFI.
Tested with Netgear EX6150v2 (IPQ4018)
Cc: Robert Marko <robimarko at gmail.com>
Cc: Thibaut Varène <hacks at slashdirt.org>
Signed-off-by: Christian Lamparter <chunkeey at gmail.com>
---
This idea came up during the discussion of:
"ath10k: support bus and device specific API 1 BDF selection"
I do not have a device which has the boardfile data stored
by the manufracturer in flash. So this patch only deals with
the (pre-)calibration data. I'll see if I can get hold of a
suitable QCA9880 device to test it as well.
I placed the new nvmem code in front of the current "file" method
(firmware_request) because it made it easier for me to test it.
If needed I can be moved to a different place as well.
---
drivers/net/wireless/ath/ath10k/core.c | 64 +++++++++++++++++++++++++-
drivers/net/wireless/ath/ath10k/core.h | 6 +++
2 files changed, 68 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
index c21e05549f61..3454d791ce76 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -12,6 +12,7 @@
#include <linux/dmi.h>
#include <linux/ctype.h>
#include <linux/pm_qos.h>
+#include <linux/nvmem-consumer.h>
#include <asm/byteorder.h>
#include "core.h"
@@ -935,7 +936,8 @@ static int ath10k_core_get_board_id_from_otp(struct ath10k *ar)
}
if (ar->cal_mode == ATH10K_PRE_CAL_MODE_DT ||
- ar->cal_mode == ATH10K_PRE_CAL_MODE_FILE)
+ ar->cal_mode == ATH10K_PRE_CAL_MODE_FILE ||
+ ar->cal_mode == ATH10K_PRE_CAL_MODE_NVMEM)
bmi_board_id_param = BMI_PARAM_GET_FLASH_BOARD_ID;
else
bmi_board_id_param = BMI_PARAM_GET_EEPROM_BOARD_ID;
@@ -1726,7 +1728,8 @@ static int ath10k_download_and_run_otp(struct ath10k *ar)
/* As of now pre-cal is valid for 10_4 variants */
if (ar->cal_mode == ATH10K_PRE_CAL_MODE_DT ||
- ar->cal_mode == ATH10K_PRE_CAL_MODE_FILE)
+ ar->cal_mode == ATH10K_PRE_CAL_MODE_FILE ||
+ ar->cal_mode == ATH10K_PRE_CAL_MODE_NVMEM)
bmi_otp_exe_param = BMI_PARAM_FLASH_SECTION_ALL;
ret = ath10k_bmi_execute(ar, address, bmi_otp_exe_param, &result);
@@ -1853,6 +1856,39 @@ static int ath10k_download_cal_eeprom(struct ath10k *ar)
return ret;
}
+static int ath10k_download_cal_nvmem(struct ath10k *ar, const char *cell_name)
+{
+ struct nvmem_cell *cell;
+ void *buf;
+ size_t len;
+ int ret;
+
+ cell = devm_nvmem_cell_get(ar->dev, cell_name);
+ if (IS_ERR(cell)) {
+ ret = PTR_ERR(cell);
+ return ret;
+ }
+
+ buf = nvmem_cell_read(cell, &len);
+ if (IS_ERR(buf))
+ return PTR_ERR(buf);
+
+ if (ar->hw_params.cal_data_len != len) {
+ kfree(buf);
+ ath10k_warn(ar, "invalid calibration data length in nvmem-cell '%s': %ld != %d\n",
+ cell_name, len, ar->hw_params.cal_data_len);
+ return -EMSGSIZE;
+ }
+
+ ret = ath10k_download_board_data(ar, buf, len);
+ kfree(buf);
+ if (ret)
+ ath10k_warn(ar, "failed to download calibration data from nvmem-cell '%s': %d\n",
+ cell_name, ret);
+
+ return ret;
+}
+
int ath10k_core_fetch_firmware_api_n(struct ath10k *ar, const char *name,
struct ath10k_fw_file *fw_file)
{
@@ -2087,6 +2123,18 @@ static int ath10k_core_pre_cal_download(struct ath10k *ar)
{
int ret;
+ ret = ath10k_download_cal_nvmem(ar, "pre-calibration");
+ if (ret == 0) {
+ ar->cal_mode = ATH10K_PRE_CAL_MODE_NVMEM;
+ goto success;
+ } else if (ret == -EPROBE_DEFER) {
+ return ret;
+ }
+
+ ath10k_dbg(ar, ATH10K_DBG_BOOT,
+ "boot did not find a pre-calibration nvmem-cell, try file next: %d\n",
+ ret);
+
ret = ath10k_download_cal_file(ar, ar->pre_cal_file);
if (ret == 0) {
ar->cal_mode = ATH10K_PRE_CAL_MODE_FILE;
@@ -2153,6 +2201,18 @@ static int ath10k_download_cal_data(struct ath10k *ar)
"pre cal download procedure failed, try cal file: %d\n",
ret);
+ ret = ath10k_download_cal_nvmem(ar, "calibration");
+ if (ret == 0) {
+ ar->cal_mode = ATH10K_CAL_MODE_NVMEM;
+ goto done;
+ } else if (ret == -EPROBE_DEFER) {
+ return ret;
+ }
+
+ ath10k_dbg(ar, ATH10K_DBG_BOOT,
+ "boot did not find a calibration nvmem-cell, try file next: %d\n",
+ ret);
+
ret = ath10k_download_cal_file(ar, ar->cal_file);
if (ret == 0) {
ar->cal_mode = ATH10K_CAL_MODE_FILE;
diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h
index 5aeff2d9f6cf..9f6680b3be0a 100644
--- a/drivers/net/wireless/ath/ath10k/core.h
+++ b/drivers/net/wireless/ath/ath10k/core.h
@@ -877,8 +877,10 @@ enum ath10k_cal_mode {
ATH10K_CAL_MODE_FILE,
ATH10K_CAL_MODE_OTP,
ATH10K_CAL_MODE_DT,
+ ATH10K_CAL_MODE_NVMEM,
ATH10K_PRE_CAL_MODE_FILE,
ATH10K_PRE_CAL_MODE_DT,
+ ATH10K_PRE_CAL_MODE_NVMEM,
ATH10K_CAL_MODE_EEPROM,
};
@@ -898,10 +900,14 @@ static inline const char *ath10k_cal_mode_str(enum ath10k_cal_mode mode)
return "otp";
case ATH10K_CAL_MODE_DT:
return "dt";
+ case ATH10K_CAL_MODE_NVMEM:
+ return "nvmem";
case ATH10K_PRE_CAL_MODE_FILE:
return "pre-cal-file";
case ATH10K_PRE_CAL_MODE_DT:
return "pre-cal-dt";
+ case ATH10K_PRE_CAL_MODE_NVMEM:
+ return "pre-cal-nvmem";
case ATH10K_CAL_MODE_EEPROM:
return "eeprom";
}
--
2.33.0
More information about the ath10k
mailing list