[PATCH 1/2] ath10k: htt: remove array of flexible structures
Kalle Valo
kvalo at kernel.org
Thu Dec 9 01:15:44 PST 2021
From: Kalle Valo <quic_kvalo at quicinc.com>
I updated to sparse v0.6.4 and it warns:
drivers/net/wireless/ath/ath10k/hw.c: note: in included file (through drivers/net/wireless/ath/ath10k/core.h):
drivers/net/wireless/ath/ath10k/htt.h:1503:41: warning: array of flexible structures
drivers/net/wireless/ath/ath10k/htt_rx.c: note: in included file (through drivers/net/wireless/ath/ath10k/core.h):
drivers/net/wireless/ath/ath10k/htt.h:1503:41: warning: array of flexible structures
The structure is unused in ath10k so let's just remove it.
Compile tested only.
Signed-off-by: Kalle Valo <quic_kvalo at quicinc.com>
---
drivers/net/wireless/ath/ath10k/htt.h | 110 --------------------------
1 file changed, 110 deletions(-)
diff --git a/drivers/net/wireless/ath/ath10k/htt.h b/drivers/net/wireless/ath/ath10k/htt.h
index a6de08d3bf4a..9a3a8907389b 100644
--- a/drivers/net/wireless/ath/ath10k/htt.h
+++ b/drivers/net/wireless/ath/ath10k/htt.h
@@ -1400,115 +1400,6 @@ enum htt_dbg_stats_status {
HTT_DBG_STATS_STATUS_SERIES_DONE = 7
};
-/*
- * target -> host statistics upload
- *
- * The following field definitions describe the format of the HTT target
- * to host stats upload confirmation message.
- * The message contains a cookie echoed from the HTT host->target stats
- * upload request, which identifies which request the confirmation is
- * for, and a series of tag-length-value stats information elements.
- * The tag-length header for each stats info element also includes a
- * status field, to indicate whether the request for the stat type in
- * question was fully met, partially met, unable to be met, or invalid
- * (if the stat type in question is disabled in the target).
- * A special value of all 1's in this status field is used to indicate
- * the end of the series of stats info elements.
- *
- *
- * |31 16|15 8|7 5|4 0|
- * |------------------------------------------------------------|
- * | reserved | msg type |
- * |------------------------------------------------------------|
- * | cookie LSBs |
- * |------------------------------------------------------------|
- * | cookie MSBs |
- * |------------------------------------------------------------|
- * | stats entry length | reserved | S |stat type|
- * |------------------------------------------------------------|
- * | |
- * | type-specific stats info |
- * | |
- * |------------------------------------------------------------|
- * | stats entry length | reserved | S |stat type|
- * |------------------------------------------------------------|
- * | |
- * | type-specific stats info |
- * | |
- * |------------------------------------------------------------|
- * | n/a | reserved | 111 | n/a |
- * |------------------------------------------------------------|
- * Header fields:
- * - MSG_TYPE
- * Bits 7:0
- * Purpose: identifies this is a statistics upload confirmation message
- * Value: 0x9
- * - COOKIE_LSBS
- * Bits 31:0
- * Purpose: Provide a mechanism to match a target->host stats confirmation
- * message with its preceding host->target stats request message.
- * Value: LSBs of the opaque cookie specified by the host-side requestor
- * - COOKIE_MSBS
- * Bits 31:0
- * Purpose: Provide a mechanism to match a target->host stats confirmation
- * message with its preceding host->target stats request message.
- * Value: MSBs of the opaque cookie specified by the host-side requestor
- *
- * Stats Information Element tag-length header fields:
- * - STAT_TYPE
- * Bits 4:0
- * Purpose: identifies the type of statistics info held in the
- * following information element
- * Value: htt_dbg_stats_type
- * - STATUS
- * Bits 7:5
- * Purpose: indicate whether the requested stats are present
- * Value: htt_dbg_stats_status, including a special value (0x7) to mark
- * the completion of the stats entry series
- * - LENGTH
- * Bits 31:16
- * Purpose: indicate the stats information size
- * Value: This field specifies the number of bytes of stats information
- * that follows the element tag-length header.
- * It is expected but not required that this length is a multiple of
- * 4 bytes. Even if the length is not an integer multiple of 4, the
- * subsequent stats entry header will begin on a 4-byte aligned
- * boundary.
- */
-
-#define HTT_STATS_CONF_ITEM_INFO_STAT_TYPE_MASK 0x1F
-#define HTT_STATS_CONF_ITEM_INFO_STAT_TYPE_LSB 0
-#define HTT_STATS_CONF_ITEM_INFO_STATUS_MASK 0xE0
-#define HTT_STATS_CONF_ITEM_INFO_STATUS_LSB 5
-
-struct htt_stats_conf_item {
- union {
- u8 info;
- struct {
- u8 stat_type:5; /* %HTT_DBG_STATS_ */
- u8 status:3; /* %HTT_DBG_STATS_STATUS_ */
- } __packed;
- } __packed;
- u8 pad;
- __le16 length;
- u8 payload[]; /* roundup(length, 4) long */
-} __packed;
-
-struct htt_stats_conf {
- u8 pad[3];
- __le32 cookie_lsb;
- __le32 cookie_msb;
-
- /* each item has variable length! */
- struct htt_stats_conf_item items[];
-} __packed;
-
-static inline struct htt_stats_conf_item *htt_stats_conf_next_item(
- const struct htt_stats_conf_item *item)
-{
- return (void *)item + sizeof(*item) + roundup(item->length, 4);
-}
-
/*
* host -> target FRAG DESCRIPTOR/MSDU_EXT DESC bank
*
@@ -1828,7 +1719,6 @@ struct htt_resp {
struct htt_rc_update rc_update;
struct htt_rx_test rx_test;
struct htt_pktlog_msg pktlog_msg;
- struct htt_stats_conf stats_conf;
struct htt_rx_pn_ind rx_pn_ind;
struct htt_rx_offload_ind rx_offload_ind;
struct htt_rx_in_ord_ind rx_in_ord_ind;
--
2.20.1
More information about the ath10k
mailing list