[PATCH v2] ath10k: drop beacon and probe response which leak from other channel

Kalle Valo kvalo at kernel.org
Wed Dec 8 01:00:22 PST 2021


Wen Gong <quic_wgong at quicinc.com> writes:

> When scan request on channel 1, it also receive beacon from other
> channels, and the beacon also indicate to mac80211 and wpa_supplicant,
> and then the bss info appears in radio measurement report of radio
> measurement sent from wpa_supplicant, thus lead RRM case fail.
>
> This is to drop the beacon and probe response which is not the same
> channel of scanning.
>
> Tested-on: QCA6174 hw3.2 SDIO WLAN.RMH.4.4.1-00049
>
> Signed-off-by: Wen Gong <quic_wgong at quicinc.com>
> ---
> v2: rebased to ath.git ath-202112071521
>
>  drivers/net/wireless/ath/ath10k/wmi.c | 28 ++++++++++++++++++++++++++-
>  1 file changed, 27 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
> index 7c1c2658cb5f..07764ee409fe 100644
> --- a/drivers/net/wireless/ath/ath10k/wmi.c
> +++ b/drivers/net/wireless/ath/ath10k/wmi.c
> @@ -2610,10 +2610,32 @@ int ath10k_wmi_event_mgmt_rx(struct ath10k *ar, struct sk_buff *skb)
>  	if (ieee80211_is_beacon(hdr->frame_control))
>  		ath10k_mac_handle_beacon(ar, skb);
>  
> +

This caused a new warning:

drivers/net/wireless/ath/ath10k/wmi.c:2613: Please don't use multiple blank lines

Fixed in the pending branch.

-- 
https://patchwork.kernel.org/project/linux-wireless/list/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches



More information about the ath10k mailing list