[PATCH] ath10k: drop beacon and probe response which leak from other channel

[Kalle Valo]

Wen Gong <quic_wgong at quicinc.com> wrote:

> When scan request on channel 1, it also receive beacon from other
> channels, and the beacon also indicate to mac80211 and wpa_supplicant,
> and then the bss info appears in radio measurement report of radio
> measurement sent from wpa_supplicant, thus lead RRM case fail.
> 
> This is to drop the beacon and probe response which is not the same
> channel of scanning.
> 
> Tested-on: QCA6174 hw3.2 SDIO WLAN.RMH.4.4.1-00049
> 
> Signed-off-by: Wen Gong <quic_wgong at quicinc.com>
> Reported-by: kernel test robot <lkp at intel.com>

Fails to apply:

error: patch failed: drivers/net/wireless/ath/ath10k/wmi.c:2610
error: drivers/net/wireless/ath/ath10k/wmi.c: patch does not apply
stg import: Diff does not apply cleanly

Patch set to Changes Requested.

-- 
https://patchwork.kernel.org/project/linux-wireless/patch/20211026025114.26313-1-quic_wgong@quicinc.com/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches