[RFC PATCH 14/15] WIP: PCI: qcom: use pwrseq to power up bus devices
Bjorn Andersson
bjorn.andersson at linaro.org
Thu Aug 19 16:44:26 PDT 2021
On Mon 16 Aug 17:55 PDT 2021, Dmitry Baryshkov wrote:
> Use bus-pwrseq device tree node to power up the devices on the bus. This
> is to be rewritten with the proper code parsing the device tree and
> powering up individual devices.
>
How about describing the PCI device in DT and having the PCIe controller
dig it up up from there? Although we won't have a struct device until
later, so perhaps we need the of-based pwrseq_get() for that.
Regards,
Bjorn
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
> ---
> drivers/pci/controller/dwc/pcie-qcom.c | 13 +++++++++++++
> drivers/power/pwrseq/pwrseq_qca.c | 1 +
> 2 files changed, 14 insertions(+)
>
> diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
> index 8a7a300163e5..a60d41fbcd6f 100644
> --- a/drivers/pci/controller/dwc/pcie-qcom.c
> +++ b/drivers/pci/controller/dwc/pcie-qcom.c
> @@ -23,6 +23,7 @@
> #include <linux/pm_runtime.h>
> #include <linux/platform_device.h>
> #include <linux/phy/phy.h>
> +#include <linux/pwrseq/consumer.h>
> #include <linux/regulator/consumer.h>
> #include <linux/reset.h>
> #include <linux/slab.h>
> @@ -1467,6 +1468,7 @@ static int qcom_pcie_probe(struct platform_device *pdev)
> struct pcie_port *pp;
> struct dw_pcie *pci;
> struct qcom_pcie *pcie;
> + struct pwrseq *pwrseq;
> int ret;
>
> pcie = devm_kzalloc(dev, sizeof(*pcie), GFP_KERNEL);
> @@ -1520,6 +1522,17 @@ static int qcom_pcie_probe(struct platform_device *pdev)
>
> pp->ops = &qcom_pcie_dw_ops;
>
> + pwrseq = devm_pwrseq_get_optional(dev, "bus");
> + if (IS_ERR(pwrseq)) {
> + ret = PTR_ERR(pwrseq);
> + goto err_pm_runtime_put;
> + }
> + if (pwrseq) {
> + ret = pwrseq_full_power_on(pwrseq);
> + if (ret)
> + goto err_pm_runtime_put;
> + }
> +
> ret = phy_init(pcie->phy);
> if (ret) {
> pm_runtime_disable(&pdev->dev);
> diff --git a/drivers/power/pwrseq/pwrseq_qca.c b/drivers/power/pwrseq/pwrseq_qca.c
> index 3421a4821126..4107f0a9c05d 100644
> --- a/drivers/power/pwrseq/pwrseq_qca.c
> +++ b/drivers/power/pwrseq/pwrseq_qca.c
> @@ -1,3 +1,4 @@
> +#define DEBUG
> // SPDX-License-Identifier: GPL-2.0-only
> /*
> * Copyright (c) 2021, Linaro Ltd.
> --
> 2.30.2
>
More information about the ath10k
mailing list