[v2] ath10k-firmware: QCA4019 hw1.0: Add Linksys MR8300 V1.0 specific BDFs

[Hans Geiblinger]

Hi,


The support for this device is currently being added into OpenWrt. This AP requires 
two special BDFs to get the Wi-Fi PHYs working (correctly).


* description for what hardware this is:
   - it is a IPQ4019 based board
     - one QCA40xx radio is used as 2.4GHz radio
     - one QCA40xx radio is used as 5GHz radio


* origin of the board file
   - boarddata files were taken from OEM Linksys FW_MR8300_1.1.7.201281_prod.img


* ids to be used with the board file
   - QCA4019 hw1.0
     + bus=ahb,bmi-chip-id=0,bmi-board-id=20,variant=linksys-mr8300-v0-fcc
     MD5: 1e0be7672bd83ccad24cf8e998b8d1ef
     
     + bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=linksys-mr8300-v0-fcc
     MD5: 5a65c2d79f838a6e0d9d05b776491ac8


* attach the actual board file
   - The name of the files are equal to the id string in the board-2.bin (minus the ".bin")




Kind regards,
Hans
-------------- next part --------------
A non-text attachment was scrubbed...
Name: bus=ahb,bmi-chip-id=0,bmi-board-id=20,variant=linksys-mr8300-v0-fcc.bin
Type: application/octet-stream
Size: 12064 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/ath10k/attachments/20200919/1702cce6/attachment-0002.bin>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=linksys-mr8300-v0-fcc.bin
Type: application/octet-stream
Size: 12064 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/ath10k/attachments/20200919/1702cce6/attachment-0003.bin>