ath10k-firmware: QCA9888 hw1.0: Add Linksys MR8300 specific BDFs

[Hans Geiblinger]

Hi,



The support for this device is currently being added into OpenWrt. This AP requires

a special BDF to get the Wi-Fi PHY working (correctly).


* description for what hardware this is:
  
- it is a QCA9888 based radio used for 5Ghz


* origin of the board file

 - boarddata files were taken from OEM Linksys FW_MR8300_1.1.7.201281_prod.img


* ids to be used with the board file

 - QCA9888 hw1.0

        + bus=pci,bmi-chip-id=0,bmi-board-id=23,variant=linksys-mr8300-v0-fcc
           SHA256: 03F36A346D6E5BA140378751FDC3E290549D421821A8640E5CBD7A335AF17E76


* attach the actual board file

 - The name of the file is equal to the id string in the board-2.bin (minus the ".bin")


Kind regards,

            Hans
-------------- next part --------------
A non-text attachment was scrubbed...
Name: bus=pci,bmi-chip-id=0,bmi-board-id=23,variant=linksys-mr8300-v0-fcc.bin
Type: application/octet-stream
Size: 12064 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/ath10k/attachments/20200915/bc478a9f/attachment.bin>