ath10k-firmware: QCA4019 hw1.0: Add Linksys MR8300 specific BDFs

[Hans Geiblinger]

Hi,

The support for this device is currently being added into OpenWrt. This AP requires 
two special BDFs to get the Wi-Fi PHYs working (correctly).

* description for what hardware this is:
  
- it is a IPQ4019 based board
- one QCA40xx radio is used as 2.4GHz radio
- one QCA40xx radio is used as 5GHz radio


* origin of the board file
  
 - boarddata files were taken from OEM Linksys FW_MR8300_1.1.7.201281_prod.img


* ids to be used with the board file
  
 - QCA4019 hw1.0
        + bus=ahb,bmi-chip-id=0,bmi-board-id=20,variant=linksys-mr8300-v0-fcc
          SHA256: 0A8E9DBBD12A87AEDACA743B21756014F80C91FB4D1AB7FF7D1E7F059398522B
        + bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=linksys-mr8300-v0-fcc
          SHA256: A6DAF207C79BC6E0106ECD5231B5F127A36ED0A1AF5B324C5949CC07DA3CC925

* attach the actual board file
  
 - The name of the files are equal to the id string in the board-2.bin
    (minus the ".bin")


Kind regards,
            Hans
-------------- next part --------------
A non-text attachment was scrubbed...
Name: bus=ahb,bmi-chip-id=0,bmi-board-id=20,variant=linksys-mr8300-v0-fcc.bin
Type: application/octet-stream
Size: 12064 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/ath10k/attachments/20200915/c6d299b5/attachment-0002.bin>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=linksys-mr8300-v0-fcc.bin
Type: application/octet-stream
Size: 12064 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/ath10k/attachments/20200915/c6d299b5/attachment-0003.bin>