[PATCH 2/2] ath10k: DFS Host Confirmation

[Sriram R]

On 2018-05-01 01:20, Peter Oh wrote:
> On 04/30/2018 10:45 AM, Sriram R wrote:
>> In the 10.4-3.6 firmware branch there's a new DFS Host confirmation
>> feature which is advertised using WMI_SERVICE_HOST_DFS_CHECK_SUPPORT 
>> flag.
>> 
>> This new features enables the ath10k host to send information to the
>> firmware on the specifications of detected radar type. This allows the
>> firmware to validate if the host's radar pattern detector unit is
>> operational and check if the radar information shared by host matches
>> the radar pulses sent as phy error events from firmware. If the check
>> fails the firmware won't allow use of DFS channels on AP mode when 
>> using
>> FCC regulatory region.
> What's the main reason you introduce this feature?
> What are you trying to solve with this change?
>> +#define ATH10K_WMI_DFS_CONF_TIMEOUT_HZ (HZ / 2)
>>   +static void ath10k_radar_confirmation_work(struct work_struct 
>> *work)
>> +{
>> +	struct ath10k *ar = container_of(work, struct ath10k,
>> +					 radar_confirmation_work);
>> +	struct ath10k_radar_found_info radar_info;
>> +	int ret, time_left;
>> +
>> +	reinit_completion(&ar->wmi.radar_confirm);
>> +
>> +	spin_lock_bh(&ar->data_lock);
>> +	memcpy(&radar_info, &ar->last_radar_info, sizeof(radar_info));
>> +	spin_unlock_bh(&ar->data_lock);
>> +
>> +	ret = ath10k_wmi_report_radar_found(ar, &radar_info);
>> +	if (ret) {
>> +		ath10k_warn(ar, "failed to send radar found %d\n", ret);
>> +		goto wait_complete;
>> +	}
>> +
>> +	time_left = wait_for_completion_timeout(&ar->wmi.radar_confirm,
>> +						ATH10K_WMI_DFS_CONF_TIMEOUT_HZ);
> It looks wrong to me in terms of timeout value.
> Typical channel closing time in FCC domain is 200ms (excluding control
> signals), but you're waiting for 500ms for response from FW.
Right Peter, We haven't hit this limit during our testing. On an average 
we
received completion event within few milliseconds ,say less than 
10-15ms. I'll correct
this timeout in my next patch revision.
>> @@ -3765,25 +3834,46 @@ static void ath10k_dfs_radar_report(struct 
>> ath10k *ar,
>>     	ATH10K_DFS_STAT_INC(ar, pulses_detected);
>>   -	if (!ar->dfs_detector->add_pulse(ar->dfs_detector, &pe, NULL)) {
>> +	if (!ar->dfs_detector->add_pulse(ar->dfs_detector, &pe, &rs)) {
>>   		ath10k_dbg(ar, ATH10K_DBG_REGULATORY,
>>   			   "dfs no pulse pattern detected, yet\n");
>>   		return;
>>   	}
>>   -radar_detected:
>> -	ath10k_dbg(ar, ATH10K_DBG_REGULATORY, "dfs radar detected\n");
>> -	ATH10K_DFS_STAT_INC(ar, radar_detected);
>> +	if ((test_bit(WMI_SERVICE_HOST_DFS_CHECK_SUPPORT, ar->wmi.svc_map)) 
>> &&
>> +	    ar->dfs_detector->region == NL80211_DFS_FCC) {
> I feel risky that host drivers have no way to control this new feature
> and totally rely on FW feature mask. We should have a host drivers'
> feature mask such as module param and set it false (don't use) by
> default until it proves safe to use.
>> +static void
>> +ath10k_wmi_event_dfs_status_check(struct ath10k *ar, struct sk_buff 
>> *skb)
>> +{
>> +	struct wmi_dfs_status_ev_arg status_arg = {};
>> +	int ret;
>> +
>> +	ret = ath10k_wmi_pull_dfs_status(ar, skb, &status_arg);
>> +
>> +	if (ret) {
>> +		ath10k_warn(ar, "failed to parse dfs status event: %d\n", ret);
>> +		return;
>> +	}
>> +
>> +	ath10k_dbg(ar, ATH10K_DBG_REGULATORY,
>> +		   "dfs status event received from fw: %d\n",
>> +		   status_arg.status);
>> +
>> +	/* Even in case of radar detection failure we follow the same
>> +	 * behaviour as if radar is detected i.e to switch to a different
>> +	 * channel.
>> +	 */
>> +	if (status_arg.status == WMI_HW_RADAR_DETECTED ||
>> +	    status_arg.status == WMI_RADAR_DETECTION_FAIL)
>> +		ath10k_radar_detected(ar);
>> +	complete(&ar->wmi.radar_confirm);
>> +}
> What is typical average duration from
> wait_for_completion_timeout(&ar->wmi.radar_confirm) to this completion
> called ?
We didn't see this taking more than 20ms to reach this completion.
As mentioned above I'll change the timeout value in the next patch.

Thanks,
Sriram.R
> 
> Thanks,
> Peter