[1/2] ath10k: enable QCA6174/QCA9377 to read the chip temperature

[Kalle Valo]

ryanhsu at codeaurora.org wrote:

> The firmware of QCA6174/QCA9377 already support the feature, just enable
> it to be able to handle the get_temperature command and process the event.
> 
> You can read the temperature by using the hwmon interface,
> 
> cat /sys/class/ieee80211/phy*/device/hwmon/hwmon2/temp1_input
> 
> Verified with the following hardware and software combination,
> QCA6174, only firmware-4.bin doesn't support this, otherwise all support.
> QCA9377, all the firmwares upstreamed support this command
> 
> Signed-off-by: Ryan Hsu <ryanhsu at codeaurora.org>
> Signed-off-by: Kalle Valo <kvalo at codeaurora.org>

2 patches applied to ath-next branch of ath.git, thanks.

e98199a8c27f ath10k: enable QCA6174/QCA9377 to read the chip temperature
e3814bec380f ath10k: add FW API 6 firmware image for QCA9377

-- 
https://patchwork.kernel.org/patch/10286439/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches