no board data for WLE650V5-18

[Stefan Krüger]

Hi,

I have some trouble getting my new Compex WLE650V5-18 to work.

OS: Ubuntu 17.10
Kernel: linux-generic  4.13.0.36.38 amd64
Firmware: linux-firmware 1.169.3

/lib/firmware/ath10k/QCA9888/hw2.0$ sha256sum *
65f73a7d762dadea2f7f500151965b96988b07e867155df6a41ad7599d3473b0  board-2.bin
8f96062e838f22a8c77f473ed66b5109581a013e2b65e837e30e89ebe6cbb71e  firmware-5.bin

$ dmesg | grep ath10k
[   11.741029] ath10k_pci 0000:04:00.0: pci irq msi oper_irq_mode 2 irq_mode 
0 reset_mode 0
[   11.879752] ath10k_pci 0000:04:00.0: qca9888 hw2.0 target 0x01000000 
chip_id 0x00000000 sub 0000:0000
[   11.879763] ath10k_pci 0000:04:00.0: kconfig debug 0 debugfs 1 tracing 1 
dfs 0 testmode 0
[   11.881241] ath10k_pci 0000:04:00.0: firmware ver 10.4-3.5.1-00014 api 5 
features no-p2p,mfp,peer-flow-ctrl,allows-mesh-bcast crc32 387b6980
[   13.872516] ath10k_pci 0000:04:00.0: failed to fetch board data for 
bus=pci,bmi-chip-id=0,bmi-board-id=30 from ath10k/QCA9888/hw2.0/board-2.bin
[   13.872665] ath10k_pci 0000:04:00.0: failed to fetch board-2.bin or 
board.bin from ath10k/QCA9888/hw2.0
[   13.872693] ath10k_pci 0000:04:00.0: failed to fetch board file: -2
[   13.872776] ath10k_pci 0000:04:00.0: could not probe fw (-2)

$ lspci -s 04:00.0 -vv
04:00.0 Network controller: Qualcomm Atheros Device 0056
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 32
        Region 0: Memory at f7600000 (64-bit, non-prefetchable) [size=2M]
        Capabilities: <access denied>
        Kernel driver in use: ath10k_pci
        Kernel modules: ath10k_pci

Any help is greatly appreciated.

Thanks!