ath10k-firmware: QCA4019 hw1.0/QCA9888 hw2.0: Add OpenMesh A62 specific BDFs

[Christian Lamparter]

On Donnerstag, 19. April 2018 16:47:22 CEST Sven Eckelmann wrote:
> On Donnerstag, 19. April 2018 14:33:04 CEST Kalle Valo wrote:
> > >> Unfortunately, this is wrong. Please check the mail again. The 
> > >> bus=pci,bmi-chip-id=0,bmi-board-id=16,variant=OM-A62 BDF is for the QCA9888 
> > >> hw2.0 board-2.bin and not the QCA4019 hw1.0.
> > >
> > > Thanks for noticing, I'll fix that. But please separate different hw to
> > > different mails, this way I can process them one hw version at the time.
> > 
> > Fixed now, please double check:
> > 
> > https://github.com/kvalo/ath10k-firmware/commit/a315471a5f4c9890e2ed1bdb008b7aae5c885ae0
> > 
> > https://github.com/kvalo/ath10k-firmware/commit/c3604f7d3ff61d1905aac644c721372f3c2a9663
> 
> 
> Ok, will use md5sum and split my submission based on the wifi hw.
> 
> The board-2.bin's look fine now.
> 
> pending
> =======
> 
> * Asus RT-AC58U
> 
>   - submitted before the guide was published
>   - http://lists.infradead.org/pipermail/ath10k/2017-March/009454.html
I made a v2 back in 2018 January.

http://lists.infradead.org/pipermail/ath10k/2018-January/010770.html

This was necessary since ASUS updated the board file.

Regards,
Christian