ath10k-firmware: QCA4019 hw1.0/QCA9888 hw2.0: Add OpenMesh A62 specific BDFs

Kalle Valo kvalo at qca.qualcomm.com
Thu Apr 19 08:11:21 PDT 2018


Sven Eckelmann <sven.eckelmann at openmesh.com> writes:

> On Donnerstag, 19. April 2018 14:33:04 CEST Kalle Valo wrote:
>> >> Unfortunately, this is wrong. Please check the mail again. The 
>> >> bus=pci,bmi-chip-id=0,bmi-board-id=16,variant=OM-A62 BDF is for the QCA9888 
>> >> hw2.0 board-2.bin and not the QCA4019 hw1.0.
>> >
>> > Thanks for noticing, I'll fix that. But please separate different hw to
>> > different mails, this way I can process them one hw version at the time.
>> 
>> Fixed now, please double check:
>> 
>> https://github.com/kvalo/ath10k-firmware/commit/a315471a5f4c9890e2ed1bdb008b7aae5c885ae0
>> 
>> https://github.com/kvalo/ath10k-firmware/commit/c3604f7d3ff61d1905aac644c721372f3c2a9663
>
>
> Ok, will use md5sum and split my submission based on the wifi hw.

BTW, I also updated the documentation about this:

https://wireless.wiki.kernel.org/en/users/drivers/ath10k/boardfiles

> The board-2.bin's look fine now.

Great, thanks for testing.

> pending
> =======
>
> * Asus RT-AC58U
>
>   - submitted before the guide was published
>   - http://lists.infradead.org/pipermail/ath10k/2017-March/009454.html
>
> * Netgear EX6100v2/EX6150v2
>
>   - http://lists.infradead.org/pipermail/ath10k/2018-February/010845.html
>
> * 8devices Jalapeno
>
>   - http://lists.infradead.org/pipermail/ath10k/2018-March/010916.html

Thanks for the list, it was really helpful. I think I have now added all
pending board files, but please let me know if I missed anything.

-- 
Kalle Valo


More information about the ath10k mailing list