[PATCH 3/3] ath10k: average ack rssi support for data frames

[Kalle Valo]

Balaji Pothunoori <bpothuno at codeaurora.org> writes:

> Average ack rssi value is weighted average of ack rssi for
> no of msdu's has been sent.
> This feature is enabled by the host driver if firmware is capable.
> After receiving event from host, firmware allocates the necessary
> memory to store the ack_rssi for data packets during the init time.
>
> After each successful transmission, If tx completion status is OK
> and 24th bit is set in HTT message header then host will fetch the
> ack_rssi else host can ignore the ack_rssi field.
>
> Note: This patch is depends on cfg80211 patch.
>
> Signed-off-by: Balaji Pothunoori <bpothuno at codeaurora.org>
> ---
>  drivers/net/wireless/ath/ath10k/core.c   |  4 ++++
>  drivers/net/wireless/ath/ath10k/htt.h    |  6 +++++-
>  drivers/net/wireless/ath/ath10k/htt_rx.c | 21 +++++++++++++++++++++
>  drivers/net/wireless/ath/ath10k/mac.c    |  4 ++++
>  drivers/net/wireless/ath/ath10k/wmi.h    |  8 ++++++++
>  5 files changed, 42 insertions(+), 1 deletion(-)

Usually notes like above are better to put under "---" line, this way
git-am will not include in the git commit log.

-- 
Kalle Valo