ath10k: fix core PCI suspend when WoWLAN is supported but disabled

[Kalle Valo]

Kalle Valo <kvalo at qca.qualcomm.com> writes:

> Brian Norris <briannorris at chromium.org> wrote:
>
>> For devices where the FW supports WoWLAN but user-space has not
>> configured it, we don't do any PCI-specific suspend/resume operations,
>> because mac80211 doesn't call drv_suspend() when !wowlan. This has
>> particularly bad effects for some platforms, because we don't stop the
>> power-save timer, and if this timer goes off after the PCI controller
>> has suspended the link, Bad Things will happen.
>> 
>> Commit 32faa3f0ee50 ("ath10k: add the PCI PM core suspend/resume ops")
>> got some of this right, in that it understood there was a problem on
>> non-WoWLAN firmware. But it forgot the $subject case.
>> 
>> Fix this by moving all the PCI driver suspend/resume logic exclusively
>> into the driver PM hooks. This shouldn't affect WoWLAN support much
>> (this just gets executed later on).
>> 
>> I would just as well kill the entirety of ath10k_hif_suspend(), as it's
>> not even implemented on the USB or SDIO drivers. I expect that we don't
>> need the callback, except to return "supported" (i.e., 0) or "not
>> supported" (i.e., -EOPNOTSUPP).
>> 
>> Fixes: 32faa3f0ee50 ("ath10k: add the PCI PM core suspend/resume ops")
>> Fixes: 77258d409ce4 ("ath10k: enable pci soc powersaving")
>> Signed-off-by: Brian Norris <briannorris at chromium.org>
>> Cc: Ryan Hsu <ryanhsu at qti.qualcomm.com>
>> Cc: Kalle Valo <kvalo at qca.qualcomm.com>
>> Cc: Michal Kazior <michal.kazior at tieto.com>
>> Signed-off-by: Kalle Valo <kvalo at qca.qualcomm.com>
>
> Patch applied to ath-next branch of ath.git, thanks.
>
> 96378bd2c6cd ath10k: fix core PCI suspend when WoWLAN is supported but disabled

Kbuild found a build problem, I suspect it's caused by this patch:

drivers/net/wireless/ath/ath10k/pci.c:3416:8: error: implicit
declaration of function 'ath10k_pci_suspend'
[-Werror=implicit-function-declaration]

drivers/net/wireless/ath/ath10k/pci.c:3428:8: error: implicit
declaration of function 'ath10k_pci_resume'
[-Werror=implicit-function-declaration]

http://lists.infradead.org/pipermail/ath10k/2017-October/010269.html

The .config.gz there doesn't have CONFIG_PM set, maybe that's the
problem?

-- 
Kalle Valo