[PATCHv2 1/2] ath10k: update tdls teardown state to target

[mpubbise at qti.qualcomm.com]

From: Manikanta Pubbisetty <mpubbise at qti.qualcomm.com>

It is required to update the teardown state of the peer when
a tdls link with that peer is terminated. This information is
useful for the target to perform some cleanups wrt the tdls peer.

Without proper cleanup, target assumes that the peer is connected and
blocks future connection requests, updating the teardown state of the
peer addresses the problem.

Tested this change on QCA9888 with 10.4-3.5.1-00018 fw version.

Signed-off-by: Manikanta Pubbisetty <mpubbise at qti.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/mac.c |   10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 0a947ee..c6460e7 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -6201,6 +6201,16 @@ static int ath10k_sta_state(struct ieee80211_hw *hw,
 			   "mac vdev %d peer delete %pM sta %pK (sta gone)\n",
 			   arvif->vdev_id, sta->addr, sta);
 
+		if (sta->tdls) {
+			ret = ath10k_mac_tdls_peer_update(ar, arvif->vdev_id,
+							  sta,
+							  WMI_TDLS_PEER_STATE_TEARDOWN);
+			if (ret)
+				ath10k_warn(ar, "failed to update tdls peer state for %pM state %d: %i\n",
+					    sta->addr,
+					    WMI_TDLS_PEER_STATE_TEARDOWN, ret);
+		}
+
 		ret = ath10k_peer_delete(ar, arvif->vdev_id, sta->addr);
 		if (ret)
 			ath10k_warn(ar, "failed to delete peer %pM for vdev %d: %i\n",
-- 
1.7.9.5