[PATCH 2/2] ath10k: search DT for qcom, ath10k-calibration-variant

[Sven Eckelmann]

On Freitag, 10. März 2017 19:20:54 CET Christian Lamparter wrote:
[...]
> @Aeolus Yang / Kalle / QCA: Would it be possible to assign a variant string to
> the Asus RT-AC58U?
> 
> I've attached the necessary bmi-board-id=16 and bmi-board-id=17 board 
> files to this mail as well. So, all that needs to be done is to add
> them to the board-2.bin on your codeaurora / ath10k-firmware project.

@Aeolus Yang / QCA, any new infos how these BDFs or similar ones can be 
integrated in the official [1] QCA40XX board-2.bin? OpenMesh received a board 
which required modified BDFs for bmi-board-id=16 and bmi-board-id=17. This BDF 
was generated by QCA and the ODM and of course conflicts with the
bmi-board-id=16/17 file in the official QCA40XX board-2.bin. The variant 
string method [2,3] is currently the only way to have all these conflicting 
files in the same board-2.bin.

Having the RT-AC58U already integrated in the official board-2.bin would be 
good example and would reduce the barrier for other vendors (with the same
problem) a lot. For example OpenMesh could then use the same approach to get
their BDFs integrated. 

Kind regards,
	Sven

[1] "official" as in "part of the official repositories"
    * https://github.com/kvalo/ath10k-firmware
    * https://source.codeaurora.org/quic/qsdk/oss/firmware/ath10k-firmware
    * https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/
[2] https://patchwork.kernel.org/patch/9615179/
[3] https://patchwork.kernel.org/patch/9615181/
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: This is a digitally signed message part.
URL: <http://lists.infradead.org/pipermail/ath10k/attachments/20170315/0486a00f/attachment.sig>