AW: is it possible to enable dualband or even 2.4 GHz on QCA9994? (Compex WLE1216V5-20)

[Lindner, Frank]

Hi,

as far as I understand, I need a special "board.bin"-file or "firmware-x.bin"-file to say the card it should make 2g or 5g?
So where do I get those "special" files? Or can I build them myself?
I can not find any helpful information on "Google".

Thanks
BG
Frank

-----Ursprüngliche Nachricht-----
Von: adrian.chadd at gmail.com [mailto:adrian.chadd at gmail.com] Im Auftrag von Adrian Chadd
Gesendet: Dienstag, 6. Juni 2017 08:40
An: Lindner, Frank
Cc: Ben Greear; ath10k at lists.infradead.org
Betreff: Re: is it possible to enable dualband or even 2.4 GHz on QCA9994? (Compex WLE1216V5-20)

It looks like it's really designed as either 2g or 5g. You could make your own card up with both 2g/5g paths but you'd have to reload the firmware/calibration data as needed to band switch. it wouldn't be "automatic". :(

sorry!


-a


On 5 June 2017 at 22:33, Lindner, Frank <Frank.Lindner at ghmt.de> wrote:
> Hi,
>
> Adrian, do you have some updates? I search for an dualband card (MINI PCIe) with 4x4 Wave2, like 9984 o 9994. It will be needed only for receiving path. And I need the info, if and how is possible to enable dualband mode. If there is some physics like LNA or what ever missing, we can do this our self.
> Thanks.
> BG
> Frank
>
> -----Ursprüngliche Nachricht-----
> Von: adrian.chadd at gmail.com [mailto:adrian.chadd at gmail.com] Im Auftrag
> von Adrian Chadd
> Gesendet: Mittwoch, 31. Mai 2017 21:48
> An: Lindner, Frank
> Cc: Ben Greear; ath10k at lists.infradead.org
> Betreff: Re: is it possible to enable dualband or even 2.4 GHz on
> QCA9994? (Compex WLE1216V5-20)
>
> On 30 May 2017 at 22:23, Lindner, Frank <Frank.Lindner at ghmt.de> wrote:
>> Hi.
>> 9994 is Cascade, which should be 2.4 GHz capable as fas as Qualcomm is correct on their specs site.
>> Question was not, which other card can do 2.4 GHz. I want to enable 2.4 GHz / dualband mode via some registers or what ever on this card.
>> Where can I find the calbration files  you've mentioned?
>
> Hi,
>
> I /think/ cascade doesn't have the ability to run dual mode. It's designed to either be 2G or 5G, and not both like STA mode. I'd have to go check.
>
> (I think I ran over this issue at work recently..)
>
>
> -adrian
>
>
>
> Vorstandsvorsitzender: Dipl.-Ing. Dirk Wilhelm
> Aufsichtsratsvorsitzender: Dr.-Ing. Peter Hasse
> Handelsregister: HRB Saarbrücken Nr. 13201 Ust.ID Nr.: DE 153807627



Vorstandsvorsitzender: Dipl.-Ing. Dirk Wilhelm
Aufsichtsratsvorsitzender: Dr.-Ing. Peter Hasse
Handelsregister: HRB Saarbrücken Nr. 13201
Ust.ID Nr.: DE 153807627