Dakota support IBSS mode

[Ben Greear]

On 06/06/2017 10:00 AM, yu-chieh kung wrote:
> Hi Ben
>
> it's not a NIC card. So there is no pci information.
> I think it connects over AHB
> i found the patch like
> https://patchwork.kernel.org/patch/8022221/
> And the officially firmware is
> https://github.com/kvalo/ath10k-firmware/tree/master/QCA4019/hw1.0

Ahh, ok.

Seems my 10.4 CT firmware could be built for it, but I haven't tried to
compile that target.  Would likely be a bit of work to get things working.

Once I could get it compiling, IBSS would likely just work.

Thanks,
Ben

>
> Thanks,
>
>
> 2017-06-07 0:42 GMT+08:00 Ben Greear <greearb at candelatech.com>:
>> On 06/06/2017 09:42 AM, yu-chieh kung wrote:
>>>
>>> Hi Ben
>>>
>>> it's IPQ4018/4019. SOC with dual band RF inside
>>> https://www.qualcomm.com/products/ipq4018
>>>
>>> Does CT firmware support it?
>>
>>
>> I don't know, that page has zero useful wifi chipset info that I can find
>> ..please send me 'dmesg' output of a boot (or especially 'lspci' if you have
>> that)
>> and I should be able to tell you.
>>
>> Thanks,
>> Ben
>>
>>
>>>
>>> Thanks
>>>
>>> 2017-06-07 0:19 GMT+08:00 Ben Greear <greearb at candelatech.com>:
>>>>
>>>> What is the wifi chipset number for "Dakota"?
>>>>
>>>> Thanks,
>>>> Ben
>>>>
>>>>
>>>> On 06/06/2017 01:35 AM, yu-chieh kung wrote:
>>>>>
>>>>>
>>>>> Hi All,
>>>>>
>>>>> Does anyone know if any ath10k firmware that can support IBSS mode on
>>>>> Dakota platform?
>>>>>
>>>>> Thanks,
>>>>>
>>>>> _______________________________________________
>>>>> ath10k mailing list
>>>>> ath10k at lists.infradead.org
>>>>> http://lists.infradead.org/mailman/listinfo/ath10k
>>>>>
>>>>
>>>>
>>>> --
>>>> Ben Greear <greearb at candelatech.com>
>>>> Candela Technologies Inc  http://www.candelatech.com
>>>>
>>>
>>
>>
>> --
>> Ben Greear <greearb at candelatech.com>
>> Candela Technologies Inc  http://www.candelatech.com
>>
>


-- 
Ben Greear <greearb at candelatech.com>
Candela Technologies Inc  http://www.candelatech.com