[PATCHv2] ath10k: Update available channel list for 5G radio

c_traja at qti.qualcomm.com c_traja at qti.qualcomm.com
Sun Feb 19 21:06:30 PST 2017


From: Tamizh chelvam <c_traja at qti.qualcomm.com>

If a 5 GHz radio is calibrated for operation in both
the low band (channels 36 to 64) and
high band(channels 100 to 169), hardware allows operations
in all the listed channels. However, if the chip has been
calibrated only for the low/high band and a high/low band
channel is configured, due to lack of calibration there will
be potentially invalid signal on those non calibrated channels.
To avoid this problem this patch introduces ath10k_low_5ghz_channel
and ath10k_high_5ghz_channel lists as separate arrays.
The channel list will be initialized depending on the low_5ghz_chan
and high_5ghz_chan values which we get from target through
wmi service ready event.

Signed-off-by: Tamizh chelvam <c_traja at qti.qualcomm.com>
---
v2:
  * Addressed Jouni and Kalle's comments

 drivers/net/wireless/ath/ath10k/core.h |    2 ++
 drivers/net/wireless/ath/ath10k/mac.c  |   55 +++++++++++++++++++++++++++++---
 drivers/net/wireless/ath/ath10k/wmi.c  |    6 ++++
 drivers/net/wireless/ath/ath10k/wmi.h  |    2 ++
 4 files changed, 61 insertions(+), 4 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h
index 88d14be..d07d567 100644
--- a/drivers/net/wireless/ath/ath10k/core.h
+++ b/drivers/net/wireless/ath/ath10k/core.h
@@ -774,6 +774,8 @@ struct ath10k {
 	u32 vht_cap_info;
 	u32 num_rf_chains;
 	u32 max_spatial_stream;
+	u32 low_5ghz_chan;
+	u32 high_5ghz_chan;
 	/* protected by conf_mutex */
 	bool ani_enabled;
 
diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 3029f25..0840efb 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -7623,6 +7623,38 @@ static void ath10k_mac_op_sta_pre_rcu_remove(struct ieee80211_hw *hw,
 	CHAN2G(14, 2484, 0),
 };
 
+static const struct ieee80211_channel ath10k_low_5ghz_channels[] = {
+	CHAN5G(36, 5180, 0),
+	CHAN5G(40, 5200, 0),
+	CHAN5G(44, 5220, 0),
+	CHAN5G(48, 5240, 0),
+	CHAN5G(52, 5260, 0),
+	CHAN5G(56, 5280, 0),
+	CHAN5G(60, 5300, 0),
+	CHAN5G(64, 5320, 0),
+};
+
+static const struct ieee80211_channel ath10k_high_5ghz_channels[] = {
+	CHAN5G(100, 5500, 0),
+	CHAN5G(104, 5520, 0),
+	CHAN5G(108, 5540, 0),
+	CHAN5G(112, 5560, 0),
+	CHAN5G(116, 5580, 0),
+	CHAN5G(120, 5600, 0),
+	CHAN5G(124, 5620, 0),
+	CHAN5G(128, 5640, 0),
+	CHAN5G(132, 5660, 0),
+	CHAN5G(136, 5680, 0),
+	CHAN5G(140, 5700, 0),
+	CHAN5G(144, 5720, 0),
+	CHAN5G(149, 5745, 0),
+	CHAN5G(153, 5765, 0),
+	CHAN5G(157, 5785, 0),
+	CHAN5G(161, 5805, 0),
+	CHAN5G(165, 5825, 0),
+	CHAN5G(169, 5845, 0),
+};
+
 static const struct ieee80211_channel ath10k_5ghz_channels[] = {
 	CHAN5G(36, 5180, 0),
 	CHAN5G(40, 5200, 0),
@@ -8014,6 +8046,7 @@ int ath10k_mac_register(struct ath10k *ar)
 	};
 	struct ieee80211_supported_band *band;
 	void *channels;
+	int n_channels;
 	int ret;
 
 	SET_IEEE80211_PERM_ADDR(ar->hw, ar->mac_addr);
@@ -8049,16 +8082,30 @@ int ath10k_mac_register(struct ath10k *ar)
 	}
 
 	if (ar->phy_capability & WHAL_WLAN_11A_CAPABILITY) {
-		channels = kmemdup(ath10k_5ghz_channels,
-				   sizeof(ath10k_5ghz_channels),
-				   GFP_KERNEL);
+		if (ar->high_5ghz_chan <= 5350) {
+			channels = kmemdup(ath10k_low_5ghz_channels,
+					   sizeof(ath10k_low_5ghz_channels),
+					   GFP_KERNEL);
+			n_channels = ARRAY_SIZE(ath10k_low_5ghz_channels);
+		} else if (ar->low_5ghz_chan >= 5490 &&
+			   ar->high_5ghz_chan <= 5885) {
+			channels = kmemdup(ath10k_high_5ghz_channels,
+					   sizeof(ath10k_high_5ghz_channels),
+					   GFP_KERNEL);
+			n_channels = ARRAY_SIZE(ath10k_high_5ghz_channels);
+		} else {
+			channels = kmemdup(ath10k_5ghz_channels,
+					   sizeof(ath10k_5ghz_channels),
+					   GFP_KERNEL);
+			n_channels = ARRAY_SIZE(ath10k_5ghz_channels);
+		}
 		if (!channels) {
 			ret = -ENOMEM;
 			goto err_free;
 		}
 
 		band = &ar->mac.sbands[NL80211_BAND_5GHZ];
-		band->n_channels = ARRAY_SIZE(ath10k_5ghz_channels);
+		band->n_channels = n_channels;
 		band->channels = channels;
 		band->n_bitrates = ath10k_a_rates_size;
 		band->bitrates = ath10k_a_rates;
diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index 2f1743e..b31c4f7 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -4593,6 +4593,8 @@ static int ath10k_wmi_alloc_host_mem(struct ath10k *ar, u32 req_id,
 	arg->phy_capab = ev->phy_capability;
 	arg->num_rf_chains = ev->num_rf_chains;
 	arg->eeprom_rd = ev->hal_reg_capabilities.eeprom_rd;
+	arg->low_5ghz_chan = ev->hal_reg_capabilities.low_5ghz_chan;
+	arg->high_5ghz_chan = ev->hal_reg_capabilities.high_5ghz_chan;
 	arg->num_mem_reqs = ev->num_mem_reqs;
 	arg->service_map = ev->wmi_service_bitmap;
 	arg->service_map_len = sizeof(ev->wmi_service_bitmap);
@@ -4629,6 +4631,8 @@ static int ath10k_wmi_alloc_host_mem(struct ath10k *ar, u32 req_id,
 	arg->phy_capab = ev->phy_capability;
 	arg->num_rf_chains = ev->num_rf_chains;
 	arg->eeprom_rd = ev->hal_reg_capabilities.eeprom_rd;
+	arg->low_5ghz_chan = ev->hal_reg_capabilities.low_5ghz_chan;
+	arg->high_5ghz_chan = ev->hal_reg_capabilities.high_5ghz_chan;
 	arg->num_mem_reqs = ev->num_mem_reqs;
 	arg->service_map = ev->wmi_service_bitmap;
 	arg->service_map_len = sizeof(ev->wmi_service_bitmap);
@@ -4682,6 +4686,8 @@ static void ath10k_wmi_event_service_ready_work(struct work_struct *work)
 	ar->phy_capability = __le32_to_cpu(arg.phy_capab);
 	ar->num_rf_chains = __le32_to_cpu(arg.num_rf_chains);
 	ar->hw_eeprom_rd = __le32_to_cpu(arg.eeprom_rd);
+	ar->low_5ghz_chan = __le32_to_cpu(arg.low_5ghz_chan);
+	ar->high_5ghz_chan = __le32_to_cpu(arg.high_5ghz_chan);
 
 	ath10k_dbg_dump(ar, ATH10K_DBG_WMI, NULL, "wmi svc: ",
 			arg.service_map, arg.service_map_len);
diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h
index 386aa51..78350d4 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.h
+++ b/drivers/net/wireless/ath/ath10k/wmi.h
@@ -6335,6 +6335,8 @@ struct wmi_svc_rdy_ev_arg {
 	__le32 num_rf_chains;
 	__le32 eeprom_rd;
 	__le32 num_mem_reqs;
+	__le32 low_5ghz_chan;
+	__le32 high_5ghz_chan;
 	const __le32 *service_map;
 	size_t service_map_len;
 	const struct wlan_host_mem_req *mem_reqs[WMI_MAX_MEM_REQS];
-- 
1.7.9.5




More information about the ath10k mailing list